MTAS Announcement Management Guide
MTAS

Contents

1Introduction
1.1Prerequisites

2
Overview

3
Announcement Attributes
3.1Call Admission Control
3.2Call Return
3.3Carrier Select
3.4Communication Barring
3.5Communication Completion
3.6Communication Diversion
3.7Communication Waiting
3.8Flexible Communication Distribution
3.9Generic Announcement
3.10Hold Communication
3.11Multimedia Telephony
3.12Network Announcement
3.13Parlay X
3.14Short Number Dialing
3.15Supplementary Service Codes
3.16Number Portability Service

1   Introduction

An announcement is played for audio or video, or both, in different services provided by the MTAS. When configuring an announcement, the announcement codes and the announcement names must be set by the operator. This document lists suggested values to be set to the announcement codes.

1.1   Prerequisites

It is assumed that the user of this document is familiar with the O&M area, in general.

1.1.1   Documents

Before starting any procedure in this document, ensure that the following documents are available:

1.1.2   Conditions

The following condition must apply:

2   Overview

An audio announcement or a video announcement, or a combination of both, can be played for several services provided by the MTAS. Depending on the offered media provided by the User Equipment (UE) and the configuration of the MTAS to a specific service, several possible combinations of announcements can be played. The combinations are shown in Figure 1.

Figure 1   Played Announcement Combinations

The announcements are sent in-band, if and only if the Session Description Protocol (SDP) supports it. The type of announcement is configurable. Announcements in early media session procedure use normal SDP offer/answer exchange plus the following:

The different services send this SDP answer to the calling party in a 183 Session Progress message, modifying the To: tag so that the 183 Session Progress message is in a new dialogue.

It is not possible to play infinite final error announcements during the call setup phase. This is done to prohibit the caller from using network resources for an infinite time.

Announcements in an established session use the following message:

The different services send SDP to the announcement recipient in the re-INVITE within the dialogue associated with the established session.

3   Announcement Attributes

This section lists the services where the announcement feature is included, their announcement attributes, and suggested value. Each service Managed Object Class (MOC) includes attributes which enable or disable the announcement feature or contains attributes which point to instances of the MtasGaAnnMO, or both. Examples of announcement enabling attributes are mtasAcrPlayAudioAnnouncement, mtasCDivPlayVideoAnnouncement, and mtasMmtAudioAnnouncement.

Examples of Generic Announcement pointer attributes are mtasOcbBCatAnnouncementName and mtasOcbLocalnessAnnouncementName.

For more information about the announcement attributes, refer to Managed Object Model (MOM).

3.1   Call Admission Control

Call Admission Control (CAC) includes the services Group Call Admission Control (GCAC) and User Call Admission Control (UCAC).

3.1.1   Group Call Admission Control

The announcement attributes in the GCAC service are listed in Table 1. The GCAC service is represented by the MtasGCac MO.

Table 1    GCAC Announcement Attributes

Attribute Name

Suggested Value

mtasGCacOrigPlayAudioAnn

0 = disabled

1 = enabled

mtasGCacOrigPlayVideoAnn

0 = disabled

1 = enabled

mtasGCacOrigAudioAnn

240

mtasGCacOrigVideoAnn

241

mtasGCacOrigAVAudioAnn

242

mtasGCacOrigAVVideoAnn

243

3.1.2   User Call Admission Control

The announcement attributes in the UCAC service are listed in Table 2. The UCAC service is represented by the MtasUCac MO.

Table 2    UCAC Announcement Attributes

Attribute Name

Suggested Value

mtasUCacOrigPlayAudioAnn

0 = disabled

1 = enabled

mtasUCacOrigPlayVideoAnn

0 = disabled

1 = enabled

mtasUCacOrigAudioAnn

250

mtasUCacOrigVideoAnn

251

mtasUCacOrigAVAudioAnn

252

mtasUCacOrigAVVideoAnn

253

3.2   Call Return

The announcement attributes in the Call Return service are listed in Table 3. The Call Return service is represented by the MtasCr MO.

Table 3    Call Return Announcement Attributes

Attribute Name

Suggested Value

mtasCrNoSavedCallAnnName

Type: String


Length: 0–32

mtasCrPrivacyCallSavedAnnName

Type: String


Length: 0–32

mtasCrPromptAnnName

Type: String


Length: 0–32

mtasCrNoPhonePromptAnnName

Type: String


Length: 0–32

mtasCrAutoAnnName

Type: String


Length: 0–32

3.3   Carrier Select

The announcement attributes in the Carrier Select (CS) service are listed in Table 4. The CS service is represented by the MtasCs MO.

Table 4    CS Announcement Attributes

Attribute Name

Suggested Value

mtasCsLocalDisallowAudioAnnCtrl

0 = disabled

1 = enabled

mtasCsLocalDisallowVideoAnnCtrl

0 = disabled

1 = enabled

mtasCsDestDisallowAudioAnnCtrl

0 = disabled

1 = enabled

mtasCsDestDisallowVideoAnnCtrl

0 = disabled

1 = enabled

mtasCsLocalDisallowedAudioAnn

220

mtasCsLocalDisallowedVideoAnn

221

mtasCsLocalDisallowedAVAudioAnn

222

mtasCsLocalDisallowedAVVideoAnn

223

mtasCsDestDisallowedAudioAnn

224

mtasCsDestDisallowedVideoAnn

225

mtasCsDestDisallowedAVAudioAnn

226

mtasCsDestDisallowedAVVideoAnn

227

3.4   Communication Barring

The Communication Barring includes the services Anonymous Communication Rejection (ACR), Do Not Disturb Communication Barring (DNDCB), Incoming Communication Barring (ICB), and Outgoing Communication Barring (OCB).

3.4.1   Anonymous Communication Rejection

The announcement attributes in the ACR service are listed in Table 5. The ACR service is represented by the MtasAcr MO.

The service can also use Generic Announcement, see Section 3.9 Generic Announcement, instead of the regular announcement specified by the announcement attributes specified in the table.

Table 5    ACR Announcement Attributes

Attribute Name

Suggested Value

mtasAcrPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasAcrPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasAcrAudioAnnounceCode

150

mtasAcrVideoOnlyCode

151

mtasAcrAVAudioCode

152

mtasAcrAVVideoCode

153

3.4.2   Do Not Disturb Communication Barring

Do Not Disturb Communication Barring (DNDCB) has no own announcement attributes. It is either using generic announcement (see Section 3.9 Generic Announcement) or if no generic announcement is configured, then it is using ACR announcement (if the rule is a combination of ACR and DNDCB) or ICB announcement.

3.4.3   Incoming Communication Barring

The announcement attributes in the ICB service are listed in Table 6. The ICB service is represented by the MtasIcb MO.

The service can also use Generic Announcement, see Section 3.9 Generic Announcement, instead of the regular announcement specified by the announcement attributes specified in the table.

Table 6    ICB Announcement Attributes

Attribute Name

Suggested Value

mtasIcbPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasIcbPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasIcbAudioAnnounceCode

170

mtasIcbVideoOnlyCode

171

mtasIcbAVAudioCode

172

mtasIcbAVVideoCode

173

3.4.4   Outgoing Communication Barring

The announcement attributes in the OCB service are listed in Table 7. The OCB service is represented by the MtasOcb MO.

The service can also use Generic Announcement, see Section 3.9 Generic Announcement, instead of the regular announcement specified by the announcement attributes specified in the table.

Table 7    OCB Announcement Attributes

Attribute Name

Suggested Value

mtasOcbPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasOcbPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasOcbAudioAnnounceCode

140

mtasOcbVideoOnlyCode

141

mtasOcbAVAudioCode

142

mtasOcbAVVideoCode

143

3.4.4.1   User Barring Category

Each User Barring Category is defined by an instance of MtasOcbBCat listed in Table 8, which contains attributes that specify which announcement to play.

Table 8    User Barring Category Announcement Attributes

Attribute Name

Suggested Value

mtasOcbBCatAnnouncementName

  

mtasOcbBCatAnnouncementControl

0 = use attributes in MtasOcb ( Table 7)

1 = use attribute mtasOcbBCatAnnouncementName

3.4.4.2   Operator Barring Category

Each Operator Barring Category is defined by an instance of MtasOcbOpBCat listed in Table 9, which contains attributes that specify which announcement to play.

Table 9    Operator Barring Category Announcement Attributes

Attribute Name

Suggested Value

mtasOcbOpBCatAnnouncementName

  

mtasOcbOpBCatAnnouncementControl

0 = use attributes in MtasOcb ( Table 7)

1 = use attribute mtasOcbOpBCatAnnouncementName

3.4.4.3   Localness Barring Category

Each Localness Barring Category is defined by configuration within MO NumAnaLocalCallTable and its children and grandchildren MOs. The announcements associated with each Localness Barring category are defined by the attributes of MtasOcbLocalnessBCat and listed in Table 10.

Table 10    Localness Barring Category Announcement Attributes

Attribute Name

Suggested Value

mtasOcbLocalnessBCatAnnouncementName

  

mtasOcbLocalnessBCatAnnouncementControl

0 = use attributes in MtasOcb, see Table 7

1 = use attribute mtasOcbLocalnessBCatAnnouncementName

3.5   Communication Completion

The announcement attributes in the Communication Completion (CC) service are listed in Table 11. The CC service is represented by the MtasCc Managed Object (MO).

Table 11    CC Announcement Attributes

Attribute Name

Suggested Value

mtasCcPlayRecallAudioAnn

0 = disabled

1 = enabled

mtasCcPlayRecallVideoAnn

0 = disabled

1 = enabled

mtasCcPlayRingToneAudioAnn

0 = disabled

1 = enabled

mtasCcPlayRingToneVideoAnn

0 = disabled

1 = enabled

mtasCcRecallAudioAnn

180

mtasCcRecallVideoAnn

181

mtasCcRecallAVAudioAnn

182

mtasCcRecallAVVideoAnn

183

mtasCcRingToneAudioAnn

184

mtasCcRingToneVideoAnn

185

mtasCcRingToneAVAudioAnn

186

mtasCcRingToneAVVideoAnn

187

mtasCcInvokeSuccessAudioAnn

188

mtasCcInvokeSuccessVideoAnn

189

mtasCcInvokeSuccessAVAudioAnn

190

mtasCcInvokeSuccessAVVideoAnn

191

mtasCcInvokeFailAudioAnn

192

mtasCcInvokeFailVideoAnn

193

mtasCcInvokeFailAVAudioAnn

194

mtasCcInvokeFailAVVideoAnn

195

mtasCcBusyToneAudioAnn

196

mtasCcBusyToneVideoAnn

197

mtasCcBusyToneAVAudioAnn

198

mtasCcBusyToneAVVideoAnn

199

mtasCcCallFailedAudioAnn

200

mtasCcCallFailedVideoAnn

201

mtasCcCallFailedAVAudioAnn

202

mtasCcCallFailedAVVideoAnn

203

mtasCcRetainedBusyToneAudioAnn

204

mtasCcRetainedBusyToneVideoAnn

205

mtasCcRetainedBusyToneAVAudioAnn

206

mtasCcRetainedBusyToneAVVideoAnn

207

The CC service includes the additional services Communication Completion Busy Subscriber (CCBS) and Communication Completion No Reply (CCNR).

3.5.1   Communication Completion Busy Subscriber

The announcement attributes in the CCBS service are listed in Table 12. The CCBS service is represented by the MtasCcbs MO.

Table 12    CCBS Announcement Attributes

Attribute Name

Suggested Value

mtasCcbsPlayInvokePromptAudioAnn

0 = disabled

1 = enabled

mtasCcbsPlayInvokePromptVideoAnn

0 = disabled

1 = enabled

mtasCcbsIvrPlayInvPromptAudioAnn

0 = disabled

1 = enabled

mtasCcbsIvrPlayInvPromptVideoAnn

0 = disabled

1 = enabled

mtasCcbsInvokePromptAudioAnn

210

mtasCcbsInvokePromptVideoAnn

211

mtasCcbsInvokePromptAVAudioAnn

212

mtasCcbsInvokePromptAVVideoAnn

213

mtasCcbsIvrInvPromptAudioAnn

214

mtasCcbsIvrInvPromptVideoAnn

215

mtasCcbsIvrInvPromptAVAudioAnn

216

mtasCcbsIvrInvPromptAVVideoAnn

217

3.5.2   Communication Completion No Reply

The announcement attributes in the CCNR service are listed in Table 13. The CCNR service is represented by the MtasCcnr MO.

Table 13    CCNR Announcement Attributes

Attribute Name

Suggested Value

mtasCcnrPlayInvokePromptAudioAnn

0 = disabled

1 = enabled

mtasCcnrPlayInvokePromptVideoAnn

0 = disabled

1 = enabled

mtasCcnrIvrPlayInvPromptAudioAnn

0 = disabled

1 = enabled

mtasCcnrIvrPlayInvPromptVideoAnn

0 = disabled

1 = enabled

mtasCcnrInvokePromptAudioAnn

230

mtasCcnrInvokePromptVideoAnn

231

mtasCcnrInvokePromptAVAudioAnn

232

mtasCcnrInvokePromptAVVideoAnn

233

mtasCcnrIvrInvPromptAudioAnn

234

mtasCcnrIvrInvPromptVideoAnn

235

mtasCcnrIvrInvPromptAVAudioAnn

236

mtasCcnrIvrInvPromptAVVideoAnn

237

3.6   Communication Diversion

The announcement attributes in the Communication Diversion (CDIV) service are listed in Table 14. The CDIV service is represented by the MtasCDiv MO.

Table 14    CDIV Announcement Attributes

Attribute Name

Suggested Value

mtasCDivPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasCDivPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasCDivAudioAnnounceCode

120

mtasCDivVideoAnnounceCode

121

mtasCDivAVAudioAnnounceCode

122

mtasCDivAVVideoAnnounceCode

123

3.7   Communication Waiting

The announcement attributes in the Communication Waiting (CW) service are listed in Table 15. The CW service is represented by the MtasCw MO.

Table 15    CW Announcement Attributes

Attribute Name

Suggested Value

mtasCwPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasCwPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasCwAudioAnnounceCode

100

mtasCwVideoAnnounceCode

101

mtasCwAVVideoCode

102

mtasCwAVAudioCode

103

3.8   Flexible Communication Distribution

The announcement attributes in the Flexible Communication Distribution (FCD) service are listed in Table 16. The FCD service is represented by the MtasFcd MO.

Table 16    FCD Announcement Attributes

Attribute Name

Suggested Value

mtasFcdPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasFcdPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasFcdNegPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasFcdNegPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasFcdAudioAnnounceCode

160

mtasFcdVideoAnnounceCode

161

mtasFcdAVAudioAnnounceCode

162

mtasFcdAVVideoAnnounceCode

163

mtasFcdNegAudioAnnounceCode

164

mtasFcdNegVideoAnnounceCode

165

mtasFcdNegAVAudioAnnounceCode

166

mtasFcdNegAVVideoAnnounceCode

167

mtasFcdAutoAnswerAvoidance

AutoAnswerAvoidance(1)

(1)   See Section 3.9.8 Flexible Communication Distribution Auto-Answer Avoidance for more details on the suggested value.


3.9   Generic Announcement

The Generic Announcement (GA) service allows the operator to associate a set of announcement parameters with a name, then use that name in other services.

For information on GA service, refer to MTAS Generic Announcement Management Guide.

The GA service is represented by the MtasGa MO, which includes the child MtasGaAnn. Some example instances of MtasGaAnn are listed in the following tables.

3.9.1   National Toll Restriction

This section presents the GA Announcement Attributes for the National Toll Restriction service. These attributes are listed in Table 17.

Table 17    GA Announcement Attributes for National Toll Restriction

Attribute Name

Suggested Value

MtasGaAnn

"NationalToll"

mtasGaAnnPlayAudioAnnouncement ["NationalToll"]

0 = disabled

1 = enabled

mtasGaAnnPlayVideoAnnouncement ["NationalToll"]

0 = disabled

1 = enabled

mtasGaAnnAudioCode ["NationalToll"]

1500

mtasGaAnnVideoCode ["NationalToll"]

1501

mtasGaAnnAVAudioCode ["NationalToll"]

1502

mtasGaAnnAVVideoCode ["NationalToll"]

1503

mtasGaAnnCauseValue ["NationalToll"]

21

3.9.2   International Toll Restriction

This section presents the GA Announcement Attributes for the International Toll Restriction service. These attributes are listed in Table 18.

Table 18    GA Announcement Attributes for International Toll Restriction

Attribute Name

Suggested Value

MtasGaAnn

"InternationalToll"

mtasGaAnnPlayAudioAnnouncement ["InternationalToll"]

0 = disabled

1 = enabled

mtasGaAnnPlayVideoAnnouncement ["InternationalToll"]

0 = disabled

1 = enabled

mtasGaAnnAudioCode ["InternationalToll"]

1504

mtasGaAnnVideoCode ["InternationalToll"]

1505

mtasGaAnnAVAudioCode ["InternationalToll"]

1506

mtasGaAnnAVVideoCode ["InternationalToll"]

1507

mtasGaAnnCauseValue ["InternationalToll"]

21

3.9.3   Safety Service Barring

This section presents the GA Announcement Attributes for the Safety Service Barring service. These attributes are listed in Table 19.

Table 19    GA Announcement Attributes for Safety Service Barring

Attribute Name

Suggested Value

MtasGaAnn

"SafetyServiceBarring"

mtasGaAnnPlayAudioAnnouncement ["SafetyServiceBarring"]

0 = disabled

1 = enabled

mtasGaAnnPlayVideoAnnouncement ["SafetyServiceBarring"]

0 = disabled

1 = enabled

mtasGaAnnAudioCode ["SafetyServiceBarring"]

1508

mtasGaAnnVideoCode ["SafetyServiceBarring"]

1509

mtasGaAnnAVAudioCode ["SafetyServiceBarring"]

1510

mtasGaAnnAVVideoCode ["SafetyServiceBarring"]

1511

mtasGaAnnCauseValue ["SafetyServiceBarring"]

21

3.9.4   Address Policing

Address Policing includes the Long-Distance Mobile Number Policing subservice.

3.9.4.1   Long-Distance Mobile Number Policing

The Long-Distance Mobile Number subservice is represented by the MtasApLdmnp MO.

The GA Announcement Attributes for the Long-Distance Mobile Number Policing subservice are listed in Table 20.

Table 20    GA Announcement Attributes for Long-Distance Mobile Number Policing

Attribute Name

Suggested Value

mtasApLdmnpAnnouncementName

"MobileNumberPolicing"

MtasGaAnn

"MobileNumberPolicing"

mtasGaAnnPlayAudioAnnouncement ["MobileNumberPolicing"]

0 = disabled

1 = enabled

mtasGaAnnPlayVideoAnnouncement ["MobileNumberPolicing"]

0 = disabled

1 = enabled

mtasGaAnnAudioCode ["MobileNumberPolicing"]

1512

mtasGaAnnVideoCode ["MobileNumberPolicing"]

1513

mtasGaAnnAVAudioCode ["MobileNumberPolicing"]

1514

mtasGaAnnAVVideoCode ["MobileNumberPolicing"]

1515

mtasGaAnnCauseValue ["MobileNumberPolicing"]

21

3.9.5   Do Not Disturb

This section presents the GA Announcement Attributes for the Do Not Disturb service. These attributes are listed in Table 21.

Table 21    GA Announcement Attributes for Do Not Disturb

Attribute Name

Suggested Value

MtasGaAnn

"DND"

mtasGaAnnPlayAudioAnnouncement ["DND"]

0 = disabled

1 = enabled

mtasGaAnnPlayVideoAnnouncement ["DND"]

0 = disabled

1 = enabled

mtasGaAnnAudioCode ["DND"]

1516

mtasGaAnnVideoCode ["DND"]

1517

mtasGaAnnAVAudioCode ["DND"]

1518

mtasGaAnnAVVideoCode ["DND"]

1519

mtasGaAnnCauseValue ["DND"]

21

3.9.6   Relocation

This section presents examples of the Generic Announcement Attributes and the Provisioned Segmented Announcement Attributes for the Relocation service, in a "changed number" scenario.

The examples in Table 22 suggest CM attribute settings when the language tag en-gb (RFC5646) is used. That is, MLS is enabled and a valid MLS license is activated.

Table 22    Example of CM Settings for the Relocation Service

Attribute Name

Suggested Value

MtasGaAnn

Relocation_OcbChangedNumber_en_gb

mtasGaAnnPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasGaAnnPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasGaAnnAudioCode

1520

mtasGaAnnVideoCode

1521

mtasGaAnnAVAudioCode

1522

mtasGaAnnAVVideoCode

1523

mtasGaAnnCauseValue

21

MtasAnnouncementSegment

new_country_code

MtasAnnouncementSegment

new_area_code

MtasAnnouncementSegment

new_local_number

3.9.7   Explicit Communication Transfer

This section presents the GA Announcement Attributes for the Explicit Communication Transfer service. These attributes are listed in Table 23.

Table 23    ECT Announcement Attributes

Attribute Name

Suggested Value

mtasEctTermAnnName

"ExplicitCommunicationTransfer"

MtasGaAnn

"ExplicitCommunicationTransfer"

mtasGaAnnPlayAudioAnnouncement ["ExplicitCommunicationTransfer"]

0 = disabled

1 = enabled

mtasGaAnnPlayVideoAnnouncement ["ExplicitCommunicationTransfer"]

0 = disabled

1 = enabled

mtasGaAnnAudioCode ["ExplicitCommunicationTransfer"]

1524

mtasGaAnnVideoCode ["ExplicitCommunicationTransfer"]

1525

mtasGaAnnAVAudioCode ["ExplicitCommunicationTransfer"]

1526

mtasGaAnnAVVideoCode ["ExplicitCommunicationTransfer"]

1527

mtasGaAnnCauseValue ["ExplicitCommunicationTransfer"]

21

3.9.8   Flexible Communication Distribution Auto-Answer Avoidance

This section presents the GA Announcement Attributes for the Auto-Answer Avoidance feature. These attributes are listed in Table 24.

Table 24    GA Announcement Attributes for Auto-Answer-Avoidance

Attribute Name

Suggested Value

MtasGaAnn[“AutoAnswerAvoidance”]

"AutoAnswerAvoidance"

mtasGaAnnPlayAudioAnnouncement["AutoAnswerAvoidance"]

0 = disabled

1 = enabled

mtasGaAnnPlayVideoAnnouncement["AutoAnswerAvoidance"]

0 = disabled

1 = enabled

mtasGaAnnAudioCode["AutoAnswerAvoidance"]

1660

mtasGaAnnVideoCode["AutoAnswerAvoidance"]

1661

mtasGaAnnAVAudioCode["AutoAnswerAvoidance"]

1662

mtasGaAnnAVVideoCode["AutoAnswerAvoidance"]

1663

mtasGaAnnCauseValue["AutoAnswerAvoidance"]

0

3.9.9   Network-Provided Ring Back Tone

This section presents the GA Announcement Attributes for the Network Provided Ring Back Tone service. These attributes are listed in Table 25.

Table 25    Example of CM Settings of “sit” and “rt” Tones for Network-Provided Ring Back Tone Service

Attribute Name

Suggested Value

MtasGaAnn["RingBackTone1"]

"RingBackTone1"

mtasGaAnnPlayAudioAnnouncement["RingBackTone1"]

0 = disabled

1 = enabled

mtasGaAnnPlayVideoAnnouncement["RingBackTone1"]

0 = disabled

1 = enabled

mtasGaAnnAudioCode["RingBackTone1"”]

0

mtasGaAnnVideoCode["RingBackTone1"]

0

mtasGaAnnAVAudioCode["RingBackTone1"]

0

mtasGaAnnAVVideoCode["RingBackTone1"]

0

mtasGaAnnCauseValue["RingBackTone1"]

0

mtasGaAnnTone["RingBackTone1"]

sit

   

MtasGaAnn["RingBackTone2"]

"RingBackTone2"

mtasGaAnnPlayAudioAnnouncement["RingBackTone2"]

0 = disabled

1 = enabled

mtasGaAnnPlayVideoAnnouncement["RingBackTone2"]

0 = disabled

1 = enabled

mtasGaAnnAudioCode["RingBackTone2"]

0

mtasGaAnnVideoCode["RingBackTone2"]

0

mtasGaAnnAVAudioCode["RingBackTone2"]

0

mtasGaAnnAVVideoCode["RingBackTone2"]

0

mtasGaAnnCauseValue["RingBackTone2"]

0

mtasGaAnnTone["RingBackTone2"]

rt

3.9.10   Generic Announcement for CDIV Related SSC Codes

This section describes the GA announcement attributes for the CDIV-related SSC services.

The attributes in Table 26 make it possible to refer to predefined segmented announcement to be played in case of call diversion activation to new forward-to number through SSC and a specific announcement for the error case when the user tries to activate call diversion to own number.

Table 26    SSC CDIV-Related Generic Announcement Attributes

MOC

Attribute Name

Attribute Description

MtasSscCfb

mtasSscCfbPosActGenAnn

Pointer to the playable MtasGaAnn generic announcement instance (1) when Busy case call diversion activation through SSC is successful.

MtasSscCfCond

mtasSscCfCondPosActGenAnn

Pointer to the playable MtasGaAnn generic announcement instance (1) when Conditional case call diversion activation through SSC is successful.

MtasSscCfnl

mtasSscCfnlPosActGenAnn

Pointer to the playable MtasGaAnn generic announcement instance (1) when Not-Logged-in case call diversion activation through SSC is successful.

MtasSscCfnr

mtasSscCfnrPosActGenAnn

Pointer to the playable MtasGaAnn generic announcement instance (1) when No-Reply case call diversion activation through SSC is successful.

MtasSscCfnrc

mtasSscCfnrcPosActGenAnn

Pointer to the playable MtasGaAnn generic announcement instance (1) when Not-Reachable case call diversion activation through SSC is successful.

MtasSscCfu

mtasSscCfuPosActGenAnn

Pointer to the playable MtasGaAnn generic announcement instance (1) when Unconditional case call diversion activation through SSC is successful.

MtasSsc

mtasSscCfNegActOwnGenAnn

Pointer to the playable MtasGaAnn generic announcement instance (1) when call diversion activation to own number through SSC performed.

(1)  These attribute values refer to an MtasGaAnn instance. The MtasGaAnn instance referred can describe either: (i) a fixed announcement, or (ii) a segmented announcement which contains exactly one variable segment. The name of the variable segment must be "ForwardedToNumber" and the type of the variable segment must be "T_digits". The instance must be created in advance when the GenAnn pointer attribute is set.


Example 1 describes how to configure a segmented announcement for call forwarding services:

objectClass: MtasBuiltInVariableType
MtasBuiltInVariableType: T_digits
mtasBuiltInVariableTypeTypeString: digits

objectClass: MtasAnnouncementVariable
MtasAnnouncementVariable: ForwardedToNumber
mtasAnnouncementVariableType: T_digits
#Variable Announcement – variable part

objectClass: MtasAnnouncementSegment
MtasAnnouncementSegment: ForwardedToNumber
mtasAnnouncementSegmentType: 1
#Variable Announcement – fixed part

objectClass: MtasAnnouncementSegment
MtasAnnouncementSegment: 1014
mtasAnnouncementSegmentType: 0

objectClass: MtasSegmentVector
MtasSegmentVector: CFActVector1
mtasSegmentVectorLanguages: undefined
mtasSegmentVectorLanguages: en
mtasSegmentVectorSegments: 1014
mtasSegmentVectorSegments: ForwardedToNumber

objectClass: MtasGaAnn
MtasGaAnn: CFSscActivationDynamicAnn
mtasGaAnnPlayVideoAnnouncement: 0
mtasGaAnnAVAudioCode: 0
mtasGaAnnPlayAudioAnnouncement: 1
mtasGaAnnAVVideoCode: 0
mtasGaAnnCauseValue: 0
mtasGaAnnAudioCode: 0
mtasGaAnnSegmentVectors: CFActVector1
mtasGaAnnVideoCode: 0

3.10   Hold Communication

The announcement attributes in the Hold Communication (Hold) service are listed in Table 27. The Hold service is represented by the MtasHold MO.

The announcements for the Hold service are cyclically repeated during a call.

Table 27    Hold Announcement Attributes

Attribute Name

Suggested Value

mtasHoldAudioAnnouncement

0 = disabled

1 = enabled

mtasHoldVideoAnnouncement

0 = disabled

1 = enabled

mtasHoldAudioCode

130

mtasHoldVideoOnlyCode

131

mtasHoldAVAudioCode

132

mtasHoldAVVideoCode

133

3.11   Multimedia Telephony

The announcement attributes in the Multimedia Telephony (MMTel) service are listed in Table 28. The MMTel service is represented by the MtasMmt MO.

Table 28    MMTel Announcement Attributes

Attribute Name

Suggested Value

mtasMmtAudioAnnouncement

0 = disabled

1 = enabled

mtasMmtVideoAnnouncement

0 = disabled

1 = enabled

mtasMmtAudioAnnounceCode

110

mtasMmtVideoOnlyCode

111

mtasMmtAVAudioCode

112

mtasMmtAVVideoCode

113

3.12   Network Announcement

The Network Announcement (NA) service is represented by the MtasNa MO which includes the children MtasNaAnn for the originating MTAS, and MtasNaAnnT for the terminating MTAS. For each created MtasNaAnn and MtasNaAnnT MO, a new response code is created. There can be up to 300 instances of the MtasNaAnn MO and 300 instances of the MtasNaAnnT MO.

MRF dimensioning issues must be considered before activating NA on SIP responses that can cause mass signaling to MRF resources. For instance, SIP 500 and 503 responses that are received in network overload conditions. The attributes for MtasNaAnn and MtasNaAnnT are listed in Table 29.

Table 29    NA Announcement Attributes

Originating or
Terminating

Attribute Name

Suggested Value

Originating MTAS

mtasNaAnnPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasNaAnnPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasNaAnnAudioCode

20400, 20401, 20402, and so on, up to 20699

mtasNaAnnVideoOnlyCode

21400, 21401, 21402, and so on, up to 21699

mtasNaAnnAVAudioCode

22400, 22401, 22402, and so on, up to 22699

mtasNaAnnAVVideoCode

23400, 23401, 23402, and so on, up to 23699

Terminating MTAS

mtasNaAnnTPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasNaAnnTPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasNaAnnTAudioCode

30400, 30401, 30402, and so on, up to 30699

mtasNaAnnTVideoOnlyCode

31400, 31401, 31402, and so on, up to 31699

mtasNaAnnTAVAudioCode

32400, 32401, 32402, and so on, up to 32699

mtasNaAnnTAVVideoCode

33400, 33401, 33402, and so on, up to 33699

Examples of announcement attribute values for three network failure scenarios are listed in Table 30.

Table 30    Example Announcement Attribute Values

Attribute Name

SIP Response Code 400

SIP Response Code 401

SIP Response Code 699

Value for MtasNaAnn = 400 and MtasNaAnnT = 400

Value for MtasNaAnn = 401 and MtasNaAnnT = 401

Value for MtasNaAnn =699 and MtasNaAnnT = 699

mtasNaAnnAudioCode

20400

20401

20699

mtasNaAnnVideoOnlyCode

21400

21401

21699

mtasNaAnnAVAudioCode

22400

22401

22699

mtasNaAnnAVVideoCode

23400

23401

23699

mtasNaAnnTAudioCode

30400

30401

30699

mtasNaAnnTVideoOnlyCode

31400

31401

31699

mtasNaAnnTAVAudioCode

32400

32401

32699

mtasNaAnnTAVVideoCode

33400

33401

33699

3.13   Parlay X

The announcement attributes in the Parlay X service are listed in Table 31. The Parlay X service is represented by the MtasParlayX MO.

Table 31    Parlay X Announcement Attributes

Attribute Name

Suggested Value

mtasParlayX3pccPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasParlayX3pccPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasParlayX3pccSetupAudioAnnounceCode

270

mtasParlayX3pccSetupVideoAnnounceCode

271

mtasParlayX3pccSetupAVAudioAnnounceCode

272

mtasParlayX3pccSetupAVVideoAnnounceCode

273

mtasParlayX3pccRingToneAudioAnnounceCode

274

mtasParlayX3pccRingToneVideoAnnounceCode

275

mtasParlayX3pccRingToneAVAudioAnnounceCode

276

mtasParlayX3pccRingToneAVVideoAnnounceCode

277

mtasParlayX3pccSetupFailureAudioAnnounceCode

278

mtasParlayX3pccSetupFailureVideoAnnounceCode

279

mtasParlayX3pccSetupFailureAVAudioAnnounceCode

280

mtasParlayX3pccSetupFailureAVVideoAnnounceCode

281

3.14   Short Number Dialing

The announcement attributes in the Short Number Dialing (SND) service are listed in Table 32. The SND service is represented by the MtasSnd MO.

Table 32    SND Announcement Attributes

Attribute Name

Suggested Value

mtasSndPlayAudioAnnouncement

0 = disabled

1 = enabled

mtasSndPlayVideoAnnouncement

0 = disabled

1 = enabled

mtasSndAudioCode

260

mtasSndVideoCode

261

mtasSndAVAudioCode

262

mtasSndAVVideoCode

263

3.15   Supplementary Service Codes

The announcement attributes in the SSC service are listed in Table 33. The SSC service is represented by the MtasSsc MO.

Table 33    SSC Announcement Attributes

Supplementary Service

Attribute Name

Suggested Value

Used for all services

mtasSscIntComplexActiv

1000

mtasSscIntComplexDeactiv

1001

mtasSscMrfpAnnouncements

0 = disabled

1 = enabled

mtasSscNegAnnCode

1003

Communication Forwarding Unconditional (CFU)

mtasSscCfuPosActAnn

1010

mtasSscCfuPosDeactAnn

1011

mtasSscCfuPosIntAnnAct

1012

mtasSscCfuPosIntAnnDeact

1013

mtasSscCfuPosVerAnnAct

1014

mtasSscCfuPosVerAnnDeact

1015

Communication Forwarding Conditional (CFCOND)

mtasSscCfCondPosActAnn

1016

mtasSscCfCondPosDeactAnn

1017

Communication Forwarding on Busy (CFB)

mtasSscCfbPosActAnn

1020

mtasSscCfbPosDeactAnn

1021

mtasSscCfbPosIntAnnAct

1022

mtasSscCfbPosIntAnnDeact

1023

mtasSscCfbPosVerAnnAct

1024

mtasSscCfbPosVerAnnDeact

1025

Communication Forwarding on No Reply (CFNR)

mtasSscCfnrPosActAnn

1030

mtasSscCfnrPosDeactAnn

1031

mtasSscCfnrPosIntAnnAct

1032

mtasSscCfnrPosIntAnnDeact

1033

mtasSscCfnrPosVerAnnAct

1034

mtasSscCfnrPosVerAnnDeact

1035

OCB

mtasSscOcbPosActAnn

1040

mtasSscOcbPosDeactAnn

1041

mtasSscOcbPosIntAnnAct

1042

mtasSscOcbPosIntAnnDeact

1043

ACR

mtasSscAcrPosActAnn

1050

mtasSscAcrPosDeactAnn

1051

mtasSscAcrPosIntAnnAct

1052

mtasSscAcrPosIntAnnDeact

1053

Communication Forwarding Not Reachable (CFNRc)

mtasSscCfnrcPosActAnn

1060

mtasSscCfnrcPosDeactAnn

1061

mtasSscCfnrcPosIntAnnAct

1062

mtasSscCfnrcPosIntAnnDeact

1063

mtasSscCfnrcPosVerAnnAct

1064

mtasSscCfnrcPosVerAnnDeact

1065

CDIVAll

mtasSscCDivAllPosIntAnnNone

1070

mtasSscCDivAllPosIntAnnPre

1071

mtasSscCDivAllPosIntAnnCfu

1072

mtasSscCDivAllPosIntAnnCfb

1073

mtasSscCDivAllPosIntAnnCfnr

1074

mtasSscCDivAllPosIntAnnElse

1075

mtasSscCDivAllPosDeactAnn

1076

Originating Identification Presentation (OIP)

mtasSscOipPosActAnn

1080

mtasSscOipPosDeactAnn

1081

mtasSscOipPosIntAnnAct

1082

mtasSscOipPosIntAnnNotAct

1083

Originating Identification Restriction (OIR)

mtasSscOirPosActAnn

1090

mtasSscOirPosDeactAnn

1091

mtasSscOirPosIntAnnPerm

1092

mtasSscOirPosIntAnnNotAct

1093

mtasSscOirPosIntAnnNRestrict

1094

mtasSscOirPosIntAnnRestrict

1095

Terminating Identification Presentation (TIP)

mtasSscTipPosActAnn

1100

mtasSscTipPosDeactAnn

1101

mtasSscTipPosIntAnnAct

1102

mtasSscTipPosIntAnnNotAct

1103

Terminating Identification Restriction (TIR)

mtasSscTirPosActAnn

1110

mtasSscTirPosDeactAnn

1111

mtasSscTirPosIntAnnPerm

1112

mtasSscTirPosIntAnnNotAct

1113

mtasSscTirPosIntAnnNRestrict

1114

mtasSscTirPosIntAnnRestrict

1115

Calling Name Identity Presentation (CNIP)

mtasSscCnipPosActAnn

1120

mtasSscCnipPosDeactAnn

1121

mtasSscCnipPosIntAnnAct

1122

mtasSscCnipPosIntAnnDeact

1123

Multi-Subscriber Number (MSN)

mtasSscIdPresNegInvAnnMsnSel

1124

Communication Forwarding Unconditional to Voice Mail (CFUVM)

mtasSscCfuPosActAnnVm

1130

mtasSscCfuPosDeactAnnVm

1131

mtasSscCfuPosIntAnnActVm

1132

mtasSscCfuPosIntAnnDeactVm

1133

mtasSscCDivAllPosIntAnnCfuVm

1134

Communication Forwarding on Busy to Voice Mail (CFBVM)

mtasSscCfbPosActAnnVm

1140

mtasSscCfbPosDeactAnnVm

1141

mtasSscCfbPosIntAnnActVm

1142

mtasSscCfbPosIntAnnDeactVm

1143

mtasSscCDivAllPosIntAnnCfbVm

1144

Communication Forwarding on Busy and No Reply to Voice Mail (CFBNRVM)

mtasSscCfbnrPosActAnnVm

1145

mtasSscCfbnrPosDeactAnnVm

1146

mtasSscCfbnrPosIntAnnActVm

1147

mtasSscCfbnrPosIntAnnDeactVm

1148

Communication Forwarding on No Reply to Voice Mail (CFNRVM)

mtasSscCfnrPosActAnnVm

1150

mtasSscCfnrPosDeactAnnVm

1151

mtasSscCfnrPosIntAnnActVm

1152

mtasSscCfnrPosIntAnnDeactVm

1153

mtasSscCDivAllPosIntAnnCfnrVm

1154

Communication Waiting (CW)

mtasSscCwPosActAnn

1160

mtasSscCwPosDeactAnn

1161

mtasSscCwPosIntAnnAct

1162

mtasSscCwPosIntAnnDeact

1163

Malicious Communication Identification (MCID)

mtasSscMcidPosInvAnn

1170

mtasSscMcidNegInvAnn

1171

Communication Completion Busy Subscriber (CCBS)

mtasSscCcbsPosIntAnnQEmpty

1180

mtasSscCcbsPosIntAnnQNtEmpty

1181

mtasSscCcbsPosRevokeAnnQ

1182

Communication Completion No Reply (CCNR)

mtasSscCcnrPosIntAnnQNtEmpty

1190

mtasSscCcnrPosIntAnnQEmpty

1191

mtasSscCcnrPosRevokeAnnQ

1192

Dynamic Black List

mtasSscDblPosInvAnn

1200

mtasSscDblNegInvAnnNoCall

1201

mtasSscDblNegInvAnnMaxLen

1202

mtasSscDblsPosDeactAnn

1203

mtasSscDblPosIntAnnAct

1204

mtasSscDblPosIntAnnDeact

1205

Faulty PIN

mtasSscAnnFaultyPin

1210

mtasSscAnnDefaultPinNotAllowed

1211

mtasSscAnnPinLocked

1212

mtasSscPosModAnnPin

1213

Malicious Communication Rejection

mtasSscMcrPosDeactAnn

1220

mtasSscMcrPosIntAnnActMcr

1221

mtasSscMcrPosIntAnnDeactMcr

1222

mtasSscMcrPosInvAnnMcr

1223

mtasSscMcrNegInvAnnMcrMaxLen

1224

mtasSscMcrNegInvAnnMcrNoCall

1225

Do Not Disturb Communication Barring (DNDCB)

mtasSscDndCbPosActAnn

1226

mtasSscDndCbPosDeactAnn

1227

mtasSscDndCbPosIntAnnAct

1228

mtasSscDndCbPosIntAnnDeact

1229

Do Not Disturb Communication Forwarding (DNDCF)

mtasSscDndCfPosActAnn

1230

mtasSscDndCfPosDeactAnn

1231

mtasSscDndCfPosIntAnnAct

1232

mtasSscDndCfPosIntAnnDeact

1233

mtasSscCDivAllPosIntAnnDndCf

1238

mtasSscDndCfPosVerAnnAct

1240

mtasSscDndCfPosVerAnnDeact

1241

Do Not Disturb Communication Forwarding to Voice Mail (DNDCFVM)

mtasSscDndCfPosActAnnVm

1234

mtasSscDndCfPosDeactAnnVm

1235

mtasSscDndCfPosIntAnnActVm

1236

mtasSscDndCfPosIntAnnDeactVm

1237

mtasSscDndCfPosIntAnnVmCDivAll

1239

Flexible Communication Distribution Divert Primary (FCDDP)

mtasSscFcdDpPosActAnn

1250

mtasSscFcdDpPosDeactAnn

1251

mtasSscFcdDpPosIntAnnAct

1252

mtasSscFcdDpPosIntAnnDeact

1253

mtasSscFcdDpPosVerAnnAct

1254

mtasSscFcdDpPosVerAnnDeact

1255

Explicit Communication Transfer (ECT)

mtasSscEctPosInvAnn

1260

mtasSscEctPosIntAnn

1261

mtasSscEctNegInvAnn

1262

mtasSscEctNegIntAnn

1263

Communication Forwarding on Not Logged in (CFNL)

mtasSscCfnlPosActAnn

1270

mtasSscCfnlPosDeactAnn

1271

mtasSscCfnlPosIntAnnAct

1272

mtasSscCfnlPosIntAnnDeact

1273

mtasSscCfnlPosVerAnnAct

1274

mtasSscCfnlPosVerAnnDeact

1275

Communication Forwarding on Not Logged in to Voice Mail (CFNLVM)

mtasSscCfnlPosActAnnVm

1280

mtasSscCfnlPosDeactAnnVm

1281

mtasSscCfnlPosIntAnnActVm

1282

mtasSscCfnlPosIntAnnDeactVm

1283

mtasSscCfnlPosVerAnnDeactVm

1284

Hotline

mtasSscHotlinePosActAnn

1290

mtasSscHotlinePosDeactAnn

1291

mtasSscHotlinePosIntAnnAct

1292

mtasSscHotlinePosIntAnnDeact

1293

mtasSscHotlinePosActAnnVm

1294

mtasSscHotlinePosDeactAnnVm

1295

mtasSscHotlinePosIntAnnActVm

1296

mtasSscHotlinePosIntAnnDeactVm

1297

Call Return

mtasSscCrComSyntInv

Type: String


Length: 0–50

mtasSscCrAnnComSyntInv

Type: String


Length: 0–50

3.16   Number Portability Service

This section presents the GA announcement attributes for the Number Portability Service. These attributes are listed in Table 34.

Table 34    Number Portability Announcement Attributes

Attribute Name

Suggested Value

mtasGaAnn

NumPort:RN (Routing Number; if RN contains *, +, and #. These characters are to be replaced with s, p, and h, respectively.)

mtasGaAnnPlayAudioAnnouncement

1

mtasGaAnnPlayVideoAnnouncement

0

mtasGaAnnAudioCode

61090

mtasGaAnnVideoCode

0

mtasGaAnnAVAudioCode

0

mtasGaAnnAVVideoCode

0

mtasGaAnnCauseValue

0



Copyright

© Ericsson AB 2016, 2017. All rights reserved. No part of this document may be reproduced in any form without the written permission of the copyright owner.

Disclaimer

The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from the use of this document.

Trademark List
All trademarks mentioned herein are the property of their respective owners. These are shown in the document Trademark Information.

    MTAS Announcement Management Guide         MTAS