| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
mtasCat
-
This attribute is the primary key of MtasCat and this section describes the MtasCat attributes.
|
BasicAdmState |
-
mtasCatAdministrativeState
=
LOCKED
-
This attribute indicates the administrative state of the Customized Alerting Tones Support service. This attribute determines if MTAS initiates Customized Alerting Tones sending for the served user.
Dependencies: This attribute cannot not be unlocked if there is no mtasAdditionalMediaResource object created with the attribute mtasAdditionalMediaResourceAdministrativeState set to 1 and mtasAdditionalMediaResource is created with value 0.
Takes effect: New session
|
OperState |
-
mtasCatEndToEndSipPreconditions
=
DISABLED
-
This attribute defines whether MTAS CAT Service supports SIP Preconditions or not. This attribute cannot be enabled if mtasCatInvokeOnSessionProgress is enabled or mtasCatTimer is set to a value greater than 0.If Enabled, MTAS CAT Service supports SIP Preconditions.If Disabled, MTAS CAT Service does not support SIP Preconditions.
Dependencies: This attribute cannot be enabled if mtasCatInvokeOnSessionProgress is enabled or is mtasCatTimer greater than 0
Takes effect: New session
|
MtasBooleanDT |
-
mtasCatInvokeOnSessionProgress
=
false
-
This attribute indicates whether the Customized Alerting Tones service should be triggered on 183 Session Progress from the served user.
Dependencies: This attribute cannot be set to Yes if mtasCatEndToEndSipPreconditions is enabled.
Takes effect: New session
|
MtasBooleanDT |
-
mtasCatNoForkSupport
=
false
-
This attribute specifies whether MTAS shall maintain single SIP dialog towards the caller when
no-fork directive is set in the Request-Disposition header of the received INVITE.
Takes effect: New session
|
MtasCatPrivacyDT |
-
mtasCatPrivacy
=
HEADERS_UNCHANGED
-
This attribute defines if the CAT service shall anonymize From and P-A-I headers in the Invite towards CAT-S.
Takes effect: New session
|
MtasTimerSec00000to000032DT |
-
mtasCatRequestTime
=
6
-
This attribute specifies the number of seconds that MTAS will be waiting for SIP response from the CAT server before
it triggers ring tone generation from the A side, by sending 180 Ringing without SDP to the caller.
Setting the parameter to 0 means that the RFC 3261 standard value (64*T1) will be used.
It is recommended to set the value of this attribute to the 'value of mtasSipFailoverTimeInvite' multiplied by 'number of CAT Servers'.
Takes effect: New session
|
MtasString0to064DT[0..1] |
-
mtasCatRequestUriUserPart
-
This attribute defines the User part of Request URI of the INVITE message sent to the CAT Server.
Specification: String specifying Request URI that should be used in the INVITE sent to CAT-S.
Takes effect: New session
|
MtasCatSendonlySdpDT |
-
mtasCatSendonlySdp
=
UNCHANGED
-
This attribute defines if the CAT service shall set the SDP direction to sendonly and require a renegotiation of SDPs after the called party accepts the call.
Takes effect: New session
|
MtasCatSuppressToneNewDT |
-
mtasCatSuppressTone
=
NO_SUPPRESS
-
This attribute defines if the ring-back tone shall be suppressed when served user is roaming or not.
Takes effect: New session
|
MtasTimerSec00000to000032DT |
-
mtasCatTimer
=
3
-
This attribute specifies the number of seconds that MTAS will be waiting for SIP response messages from the served user before initiating the CAT service.
Setting the parameter to 0 means that the timer is not started.
Dependencies: This attribute cannot be set to value greater than 0 if mtasCatEndToEndSipPreconditions is enabled
Takes effect: New session
|
MtasCatUntilDivResponseDT |
-
mtasCatUntilDiversionResponse
=
CAT_CONTINUE_UNTIL_DIVERTED_TO_USER_RESPOND
-
This attribute defines if CAT announcement is terminated when the call is diverted and a CDIV announcement can be played or if CAT announcement should continue until diverted to user respond.
Takes effect: New session
|
MtasBooleanDT |
-
mtasCatUseBlackHoleIPv4Address
=
false
-
This attribute indicates whether the Black Hole IPv4 address shall used in the SDP offer sent to
the served user with active CAT service. The Black Hole IP address has all fields set to 0 (0.0.0.0)
Takes effect: New session
|
MtasBooleanDT |
-
mtasCatUseDiversion
=
false
-
This attribute defines whether a Diversion header is included in the Invite sent to the CAT Server. FALSE-TRUE (FALSE=The Diversion header is not included in the Invite to CAT-S, TRUE=Diversion header is included in the Invite to CAT-S, the called party is used as the diverting party and the diversion reason is set to "miringback".)
Takes effect: New session
|
MtasCatUseHistoryInfoDT |
-
mtasCatUseHistoryInfo
=
DISABLE
-
This attribute defines a way History-Info header is handled by CAT service. If its value is 0 (DISABLE), the History-Info header is not included. If the value is 1 (COPY) and the header is present in the initial INVITE, the History-Info header is copied from the initial INVITE; otherwise it is not included. If the value is 2 (UPDATE), the History-Info header is updated and included as in case of diversion.
Takes effect: New session
|
OperState |
-
mtasCatUsePChargingVector
=
DISABLED
-
This attribute defines whether P-Charging-Vector header should be sent to the CAT Server or not. If DISABLED, P-Charging Vector header is not included in the INVITE to CAT Server. If ENABLED, P-Charging Vector header is included in the INVITE to CAT Server.
Takes effect: New session
|
OperState |
-
mtasCatUseXFci
=
DISABLED
-
This attribute defines whether X-FCI header should be sent to the CAT Server or not. If DISABLED, X-FCI header is not included in the INVITE to CAT Server. If ENABLED, X-FCI header is included in the INVITE to CAT Server.
Takes effect: New session
|