Contents

1   Introduction

This document describes how to create an SNMPv1 target. An SNMPv1 target is created to forward Simple Network Management Protocol (SNMP) notifications to a management system over the SNMPv1 protocol.

1.1   Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1   Conditions

The following conditions must apply:

• The SNMP community and target IP address are known and according to the network IP plan.
• An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

2   Procedure

To create an SNMPv1 target:

1. Navigate to the Snmp Managed Object (MO), for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,SysM=1,Snmp=1

2. Enter Config mode:

   (Snmp=1)>configure

3. Create an SNMPv1 target, for example:

   (config-Snmp=1)>SnmpTargetV1=OSS_v1

4. For the SnmpTargetV1 MO, set attributes community and address, for example:

   (config-SnmpTargetV1=OSS_v1)>community=public

   (config-SnmpTargetV1=OSS_v1)>address=192.0.2.10

5. Commit the settings:

   (config-SnmpTargetV1=OSS_v1)>commit

6. Verify the settings:

   (SnmpTargetV1=OSS_v1)>show -v

   The following is an example output:

   SnmpTargetV1=OSS_v1 address="192.0.2.10" administrativeState=UNLOCKED <default> community="public" isMibWritable=true <default> operationalState= [] <empty> port=162 <default> snmpTargetV1Id=OSS_v1