class MtasNumNorm

ManagedElement
+-MtasFunction
+-MtasServices
+-MtasMmt
+-MtasNumNorm

The MtasNumNorm MO provides configuration objects for Number Normalisation service in an MTAS node.

This MO is created by the system.

Attributes
integerKeyString
key
mandatory
noNotification
restricted
mtasNumNorm
This attribute defines the primary key of MtasNumNorm and this section describes the MtasNumNorm attributes.
MtasApplyUriCorrectionEnum
mtasNumNormApplyUriCorrection = CORRECTION_DISABLED
This attribute defines whether "user=phone" and "phone-context" parameter shall be corrected by MTAS in the received URI. "user=phone" is added if it is missing in the SIP embedded Tel URI. "phone-context" is added if it is missing in the SIP embedded Tel URI or Tel URI that contains a local number. If URI contains a global number then superfluous "phone-context" is removed.

Dependencies: None
Takes effect: New session
MtasNumNormPcContentDT
mtasNumNormPcContent = PASS_DOMAIN_PART_OF_DEFAULT_SIP_PUI
This attribute defines which context is to be used to normalise the URI if set to "0" (PASS_DOMAIN_PART_OF_DEFAULT_SIP_PUI), the context associated with the default IMPU is used.
If set to "1" (PASS_CCAC) the subscriber's provisioned +CC,AC context is used to normalise the URI.


Takes effect: New session
MtasNumNormPcRemovalDT
mtasNumNormPcRemoval = KEEP_PHONE_CONTEXT_IN_URI
This attribute defines if the Phone-Context present in the URI is to be removed.
if it is removed then the subscriber's context (Country Code (CC), Area Code (AC)) associated with the subscriber is considered as a higher priority context for normalisation of the URI.
if it is not removed the URI's context is considered as a higher priority for normalisation of the URI.


Takes effect: New session
MtasNumNormReportAnalyzedCallTypeDT
mtasNumNormReportAnalyzedCallType = DISABLE_REPORTING
This attribute defines when the Analyzed Call Type is to be reported to the charging system. If set to "0" Analyzed Call Type is reported for outgoing calls from DNM and Carrier Select services, which is the legacy way of work. If set to "1" Analyzed Call Type is reported to charging system for all outgoing calls, which is the new way of work supported from MTAS 16A. Analyzed Call Type hold the result from Number Analysis service, localness check.

Dependencies: None
Takes effect: New session

  class MtasNumNorm