+-MtasParlayX3pcc

The MtasParlayX3pcc MO provides configuration for 3pcc.

This MO is created by the system.

Attributes
`integerKeyString key mandatory noNotification restricted`	`mtasParlayX3pcc` This attribute defines the primary key of MtasParlayX3pcc.
`BasicAdmState`	`mtasParlayX3pccAdministrativeState = LOCKED` This attribute defines the administrative state of the MtasParlayX3pcc MO. Dependencies: The mtasSipIcscfName needs to be set (not empty) before the service can be unlocked. Takes effect: New session
`MtasTimerSec00000to000180DT`	`mtasParlayX3pccMaxCallSetupDuration = 40` This attribute defines the maximum time allowed to get A and B connected. Takes effect: New session
`BasicAdmState`	`mtasParlayX3pccPlayAudioAnnouncement = UNLOCKED` This attribute defines whether to disable or enable the Px 3pcc Audio announcement. Dependencies: Attribute mtasParlayX3pccPlayAudioAnnouncement must not be set to 0 unless parameter mtasParlayX3pccPlayVideoAnnouncement is set to 1. One of them must be set to 1. Takes effect: New session
`BasicAdmState`	`mtasParlayX3pccPlayVideoAnnouncement = LOCKED` This attribute defines whether to disable or enable the Px 3pcc Video announcement. Dependencies: Attribute mtasParlayX3pccPlayVideoAnnouncement must not be set to 0 unless parameter mtasParlayX3pccPlayAudioAnnouncement is set to 1. One of them must be set to 1. Takes effect: New session
`MtasString0to255DT[0..1]`	`mtasParlayX3pccPrivacyB = id,user,header` This attribute defines the privacy B for Px3pcc. Takes effect: New session
`MtasString0to255DT[0..1]`	`mtasParlayX3pccRemoteAddress` This attribute defines the remote address to Px3pcc. Takes effect: New session
`BasicAdmState`	`mtasParlayX3pccRemoveMediaBridge = LOCKED` This attribute defines whether to disable or enable the Px 3pcc Media Bridge. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccRingToneAudioAnnounceCode = 0` This attribute defines the ring tone announcement code to use towards A in the setup of a 3PCC call when the call is audio only. Service orders this announcement to be played indefinitely. This also means the service stops the announcement. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccRingToneAVAudioAnnounceCode = 0` This attribute defines the audio component of the ring tone announcement to use towards A in the setup of a 3PCC call when the call is a mutlimedia call. Service orders this announcement to be played indefinitely. This also means the service stops the announcement. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccRingToneAVVideoAnnounceCode = 0` This attribute defines the video component of the ring tone announcement to use towards A in the setup of a 3PCC call when the call is a mutlimedia call. Service orders this announcement to be played indefinitely. This also means the service stops the announcement. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccRingToneVideoAnnounceCode = 0` This attribute defines the ring tone announcement code to use towards A in the setup of a 3PCC call when the call is video only. Service orders this announcement to be played indefinitely. This also means the service stops the announcement. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccSetupAudioAnnounceCode = 0` This attribute defines the audio announcement to be played to A before the setup of the call leg to B is started. The announcement can be played if the SDP negotiated with A contains audio capabilities but not video. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccSetupAVAudioAnnounceCode = 0` This attribute defines the audio component of the Audio-Video announcement to be played to A before the setup of the call leg to B is started. The announcement can be played if the SDP negotiated with A contains contains video and audio capabilities. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccSetupAVVideoAnnounceCode = 0` This attribute defines the video announcement to be played to A before the setup of the call leg to B is started. The announcement can be played if the SDP negotiated with A contains video capabilities but not audio. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccSetupFailureAudioAnnounceCode = 0` This attribute defines the audio announcement to be played to A if the setup of the call leg to B failed and the SDP negotiated with A contains audio capabilities but not video. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccSetupFailureAVAudioAnnounceCode = 0` This attribute defines the audio component of the Audio-Video announcement to be played to A if the setup of the call leg to B failed and the SDP negotiated with A contains video and audio capabilities. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccSetupFailureAVVideoAnnounceCode = 0` This attribute defines the video component of the Audio-Video announcement to be played to A if the setup of the call leg to B failed and the SDP negotiated with A contains video and audio capabilities. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccSetupFailureVideoAnnounceCode = 0` This attribute defines the video announcement to be played to A if the setup of the call leg to B failed and the SDP negotiated with A contains video capabilities but not audio. Takes effect: New session
`MtasUint00000to065535DT`	`mtasParlayX3pccSetupVideoAnnounceCode = 0` This attribute defines the video announcement to be played to A before the setup of the call leg to B is started. The announcement can be played if the SDP negotiated with A contains video capabilities but not audio. Takes effect: New session

class MtasParlayX3pcc