| Attributes |
ExtNetSelTableNameDT[0..1] |
-
extNetSelCalledPartyTableName
=
""
-
This parameter can be configured to the name of an existing ExtNetSelCalledTable. If left empty, the attribute will not be used.
Dependencies: ExtNetSelCalledTable must be configured before this parameter can be changed.
|
String0to00128DT
key
mandatory
noNotification
restricted |
-
extNetSelCallingTableEntry
-
This attribute defines the start range of the calling table and the associated extNetSelCallingTable. Note that when the + sign is used, it must be escaped with a "\" and "+" is replaced with "2B" or "2b". For example "default:+021" is configured as "default:\2B021" or "default:\2b021".
The string must follow the pattern [ExtNetSelCallingTableName]:[range], where the range part must match the value of the ExtNetSelCallingTableStartRange attribute
|
ExtNetSelNextTableNameDT[0..1] |
-
extNetSelCallingTableNextTableName
=
""
-
This parameter can be configured to the name of the ENS table where to continue the pool selection process. The referenced table must be configured before this parameter can be changed. This parameter is mutually exclusive with ExtNetSelCalledPartyTableName.
Format: [criteria]:[tableName].
A defined ENS navigation and matching table. For example: calling:[tableName], P-Asserted-Identity:[tableName], CIC:[tableName], RN:[tableName] or called:[tableName].
|
ExtNetSelCallingTableStartRangeDT
mandatory |
-
extNetSelCallingTableStartRange
-
This attribute defines the number range to match the telephone number of the calling party. The format of the number is digits or "+" followed by digits Example: +4675.
Takes effect: ChangeTypeUpgradeType - The configuration instance becomes active when the attribute extNetSelectionTablesSynchronization is set to true
|
ExtNetSelTableNameDT[0..1] |
-
extNetSelCicTableName
=
""
-
This parameter can be configured to the name of an existing ExtNetSelCicTable. If left empty, the attribute will not be used.
Dependencies: ExtNetSelCicTable must be configured before this parameter can be changed.
|
ExtNetSelTableNameDT[0..1] |
-
extNetSelRnTableName
=
""
-
This parameter can be configured to the name of an existing ExtNetSelRnTable. If left empty, the attribute will not be used.
Dependencies: ExtNetSelRnTable must be configured before this parameter can be changed.
|