Diameter, Configure Realm Routing Table

1 Description

This instruction describes how to configure a Realm Routing Table (RRT) in the Diameter application for the following:

Authorization and Authentication Application Routing
Accounting Application Routing

The RRT contains routing information, which is used to decide how to process the incoming requests from a particular Diameter application.

The RRT must be configured for the following traffic cases:

When outgoing messages are sent to the realm
When the destination host is not specified
When the destination host is specified, but not present in peer table, that is, among the configured neighbor peers

2 Procedure

Prerequisites

No documents are required.
No tools are required.
The following conditions must apply:
- For configuration of Authorization and Authentication Application Routing, the appropriate routing information is known.
- For configuration of Accounting Application Routing, the appropriate routing information is known.

2.1 Configure Realm Routing Table using CLI

Prerequisites

An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

Steps

Navigate to the DIA-CFG-RoutingContainer Managed Object (MO), for example:
>dn ManagedElement=NODE06ST,XyzFunction=xyz,DIA-CFG-Application=DIA,DIA-CFG-StackContainer=abc,DIA-CFG-RoutingContainer=abc
Enter Config mode:
(DIA-CFG-RoutingContainer=abc)>configure
Create a DIA-CFG-Drt MO, for example:
(config-DIA-CFG-RoutingContainer=abc)>DIA-CFG-Drt=ericsson.com:abc:FALSE
Commit the settings:
(config-DIA-CFG-Drt=ericsson.com:abc:FALSE)>commit
Navigate to the DIA-CFG-RoutingContainer MO:
(DIA-CFG-Drt=ericsson.com:abc:FALSE)>up

Show the settings:

(DIA-CFG-RoutingContainer=abc)>show DIA-CFG-Drt=ericsson.com:abc:FALSE

The following is an example output:

DIA-CFG-Drt=ericsson.com:abc:FALSE
   DIA-CFG-AccReqContainer=accReqContainerName
   DIA-CFG-AuthReqContainer=authReqContainerName

Is it required to configure Accounting Application Routing?
- Yes: Continue with the next step.
- No: Proceed with Step 17.
Navigate to the DIA-CFG-AccReqContainer MO, for example:
(DIA-CFG-RoutingContainer=abc)>dn ManagedElement=NODE06ST,XyzFunction=xyz,DIA-CFG-Application=DIA,DIA-CFG-StackContainer=abc,DIA-CFG-RoutingContainer=abc,DIA-CFG-Drt=ericsson.com:abc:FALSE,DIA-CFG-AccReqContainer=accReqContainerName
Enter Config mode:
(DIA-CFG-AccReqContainer=accReqContainerName)>configure
Create a DIA-CFG-AppRouting MO, for example:
(config-DIA-CFG-AccReqContainer=accReqContainerName)>DIA-CFG-AppRouting=0:8
Set the action attribute, for example:
(config-DIA-CFG-AppRouting=0:8)>action=4
Set the nodeIds attribute, for example:
(config-DIA-CFG-AppRouting=0:8)>nodeIds="0:node12.ericsson.com#abc"
Set the optional attributes, as needed:
- autoFailback
- secondaryNodeIds
Commit the settings:
(config-DIA-CFG-AppRouting=0:8)>commit

Verify the settings:

(DIA-CFG-AppRouting=0:8)>show

The following is an example output:

DIA-CFG-AppRouting=0:8
   action="4"
   nodeIds
      "0:node12.ericsson.com#abc"
   secFailoverActive=false

Is it required to configure the Authorization and Authentication Application Routing?
- Yes: Continue with the next step.
- No: Proceed with Step 25.
Navigate to the DIA-CFG-AuthReqContainer MO:
>dn ManagedElement=NODE06ST,XyzFunction=xyz,DIA-CFG-Application=DIA,DIA-CFG-StackContainer=abc,DIA-CFG-RoutingContainer=abc,DIA-CFG-Drt=ericsson.com:abc:FALSE,DIA-CFG-AuthReqContainer=authReqContainerName
Enter Config mode:
(DIA-CFG-AuthReqContainer=authReqContainerName)>configure
Create a DIA-CFG-AppRouting MO, for example:
(config-DIA-CFG-AuthReqContainer=authReqContainerName)>DIA-CFG-AppRouting=0:8
Set the action attribute, for example:
(config-DIA-CFG-AppRouting=0:8)>action=4
Set the nodeIds attribute, for example:
(config-DIA-CFG-AppRouting=0:8)>nodeIds="0:node12.ericsson.com#abc"
Set the optional attributes, as needed:
- autoFailback
- secondaryNodeIds
Commit the settings:
(config-DIA-CFG-AppRouting=0:8)>commit

Verify the settings:

(DIA-CFG-AppRouting=0:8)>show

The following is an example output:

DIA-CFG-AppRouting=0:8
   action="4"
   nodeIds
      "0:node12.ericsson.com#abc"
   secFailoverActive=false

Navigate to the relevant DIA-CFG-RoutingContainer MO, for example:
>dn ManagedElement=NODE06ST,XyzFunction=xyz,DIA-CFG-Application=DIA,DIA-CFG-StackContainer=abc,DIA-CFG-RoutingContainer=abc

Verify the settings:

(DIA-CFG-RoutingContainer=abc)>show -r

The following is an example output:

DIA-CFG-RoutingContainer=abc
   routingContainerName="routingContainerName"
   DIA-CFG-Drt=ericsson.com:abc:FALSE
            DIA-CFG-AccReqContainer=accReqContainerName
         DIA-CFG-AppRouting=0:8
            action="4"
            nodeIds
               "0:node12.ericsson.com#abc"
            secFailoverActive=false
      DIA-CFG-AuthReqContainer=authReqContainerName
         DIA-CFG-AppRouting=0:8
            action="4"
            nodeIds
               "0:node12.ericsson.com#abc"
            secFailoverActive=false

2.2 Configure Realm Routing Table using NETCONF

Prepare an XML file according to the following template to add an Entry in RRT:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
      <XYZFunctionBranch>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId><applStackId></stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId><applStackId></routingContainerId>
             <DIA-CFG-Drt operation="create">
              <entryId><entryId></entryId>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
    </XYZFunctionBranch>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Note:: The XYZFunctionBranch part can be composed of many elements, depending on where the Diameter subtree is connected in the managed element structure. In the example below, we assume that the parent MOs are already created and the XYZFunctionBranch is empty.

Example to add Entry in RRT using NETCONF

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId>TST_SRV</stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId>TST_SRV</routingContainerId>
             <DIA-CFG-Drt operation="create">
              <entryId>realm.com:TST_SRV:TRUE</entryId>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Pass the prepared XML file to shell:
ssh -p 830 <user_name>@<node_vip_address> -s -t ⇒ netconf < <xml_file>

<xml_file> refers to the XML file name.

Prepare an XML file according to the following template to add Routing to the RRT Entry:

To add a routing for an Authorization and Authentication Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
      <XYZFunctionBranch>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId><applStackId></stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId><applStackId></routingContainerId>
             <DIA-CFG-Drt>
              <entryId><entryId></entryId>
               <DIA-CFG-AuthReqContainer>
                <authReqContainerName>authReqContainerName</authReqContainerName>
                 <DIA-CFG-AppRouting operation="create">
                  <requestedApp><routingId></requestedApp>
                  <action><action></action>
                  <nodeIds><nodeIds></nodeIds>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AuthReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
    </XYZFunctionBranch>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Example to add a routing for an Accounting Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
      <XYZFunctionBranch>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId><applStackId></stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId><applStackId></routingContainerId>
             <DIA-CFG-Drt>
              <entryId><entryId></entryId>
               <DIA-CFG-AccReqContainer>
                <accReqContainerName>accReqContainerName</accReqContainerName>
                 <DIA-CFG-AppRouting operation="create">
                  <requestedApp><routingId></requestedApp>
                  <action><action></action>
                  <nodeIds><nodeIds></nodeIds>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AccReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
    </XYZFunctionBranch>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

The nodeIds attribute must be set only for outgoing requests, otherwise this list must be empty

Note:: The XYZFunctionBranch part can be composed of many elements depending on where the Diameter subtree is connected in the managed element structure. In the example, we assume that the parent MOs are already created and the XYZFunctionBranch is empty.

Example to add a Routing for an Authorization and Authentication Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId>TST_SRV</stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId>TST_SRV</routingContainerId>
             <DIA-CFG-Drt>
              <entryId>realm.com:TST_SRV:FALSE</entryId>
               <DIA-CFG-AuthReqContainer>
                <authReqContainerName>authReqContainerName</authReqContainerName>
                 <DIA-CFG-AppRouting operation="create">
                  <requestedApp>193:19302</requestedApp>
                  <action>4</action>
                  <nodeIds>0:server1.realm.com#TST_SRV</nodeIds>
                  <nodeIds>1:server2.realm.com#TST_SRV</nodeIds>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AuthReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Example to add a Routing for an Accounting Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId>TST_SRV</stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId>TST_SRV</routingContainerId>
             <DIA-CFG-Drt>
              <entryId>real.com:TST_SRV:TRUE</entryId>
               <DIA-CFG-AccReqContainer>
                <accReqContainerName>accReqContainerName</accReqContainerName>
                 <DIA-CFG-AppRouting operation="create">
                  <requestedApp>193:19302</requestedApp>
                  <action>1</action>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AccReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Pass the prepared XML file to shell:
ssh -p 830 <user_name>@<node_vip_address> -s -t ⇒ netconf < <xml_file>

<xml_file> refers to the XML file name.

Prepare an XML file according to the following template to modifying the Attributes of the Routing in the RRT.

To modify the attributes of the Routing in the RRT for an Authorization and Authentication Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
      <XYZFunctionBranch>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId><applStackId></stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId><applStackId></routingContainerId>
             <DIA-CFG-Drt>
              <entryId><entryId></entryId>
               <DIA-CFG-AuthReqContainer>
                <authReqContainerName>authReqContainerName</authReqContainerName>
                 <DIA-CFG-AppRouting operation="create">
                  <requestedApp><routingId></requestedApp>
                  <attribute1>value1</attribute1>
                  ...
                  <attributeN>valueN</attributeN>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AuthReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
    </XYZFunctionBranch>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Example to modify the attributes of the Routing in the RRT for an Accounting Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
      <XYZFunctionBranch>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId><applStackId></stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId><applStackId></routingContainerId>
             <DIA-CFG-Drt>
              <entryId><entryId></entryId>
               <DIA-CFG-AccReqContainer>
                <accReqContainerName>accReqContainerName</accReqContainerName>
                 <DIA-CFG-AppRouting operation="create">
                  <requestedApp><routingId></requestedApp>
                  <attribute1>value1</attribute1>
                  ...
                  <attributeN>valueN</attributeN>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AccReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
    </XYZFunctionBranch>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

The nodeIds attribute must be set only for outgoing requests, otherwise this list must be empty.

The redirectNodeIds attribute can be set if action is redirect or left empty.

Note:: The XYZFunctionBranch part can be composed of many elements depending on where the Diameter subtree is connected in the managed element structure. In the example below, we assume that the parent MOs are already created and the XYZFunctionBranch is empty.

Example to add a Routing for an Accounting Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId>TST_SRV</stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId>TST_SRV</routingContainerId>
             <DIA-CFG-Drt>
              <entryId>realm.com:TST_SRV:FALSE</entryId>
               <DIA-CFG-AuthReqContainer>
                <authReqContainerName>authReqContainerName</authReqContainerName>
                 <DIA-CFG-AppRouting operation="create">
                  <requestedApp>193:19302</requestedApp>
                  <action>4</action>
                  <nodeIds>0:server1.realm.com#TST_SRV</nodeIds>
                  <secondaryNodeIds>0:server11.realm.com#TST_SRV</secondaryNodeIds>
                  <autoFailback>true</autoFailback>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AuthReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Example to add a Routing for an Accounting Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId>TST_SRV</stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId>TST_SRV</routingContainerId>
             <DIA-CFG-Drt>
              <entryId>realm.com:TST_SRV:TRUE</entryId>
               <DIA-CFG-AccReqContainer>
                <accReqContainerName>accReqContainerName</accReqContainerName>
                 <DIA-CFG-AppRouting operation="create">
                  <requestedApp>193:19302</requestedApp>
                  <action>3</action>
                  <redirectNodeIds>0:server1.realm.com#TST_SRV</redirectNodeIds>
                  <secondaryNodeIds>0:server11.realm.com#TST_SRV</secondaryNodeIds>
                  <autoFailback>false</autoFailback>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AccReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Pass the prepared XML file to shell:
ssh -p 830 <user_name>@<node_vip_address> -s -t ⇒ netconf < <xml_file>

<xml_file> refers to the XML file name.

Prepare an XML file according to the following template to delete Routing from the RRT:

Example to delete the Routing from the RRT for an Authorization/Authentication Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
      <XYZFunctionBranch>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId><applStackId></stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId><applStackId></routingContainerId>
             <DIA-CFG-Drt>
              <entryId><entryId></entryId>
               <DIA-CFG-AuthReqContainer>
                <authReqContainerName>authReqContainerName</authReqContainerName>
                 <DIA-CFG-AppRouting operation="delete">
                  <requestedApp><appId></requestedApp>
                  </DIA-CFG-AppRouting>
               </DIA-CFG-AuthReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
    </XYZFunctionBranch>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Example to delete the Routing from the RRT for an Accounting Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
      <XYZFunctionBranch>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId><applStackId></stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId><applStackId></routingContainerId>
             <DIA-CFG-Drt>
              <entryId><entryId></entryId>
               <DIA-CFG-AccReqContainer>
                <accReqContainerName>accReqContainerName</accReqContainerName>
                 <DIA-CFG-AppRouting operation="delete">
                  <requestedApp><appId></requestedApp>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AccReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
    </XYZFunctionBranch>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Note:: The XYZFunctionBranch part can be composed of many elements depending on where the Diameter subtree is connected in the managed element structure. In the example below, we assume that the parent MOs are already created and the XYZFunctionBranch is empty.

Example to delete the Routing from the RRT for an Authorization and Authentication Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId>TST_SRV</stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId>TST_SRV</routingContainerId>
             <DIA-CFG-Drt>
              <entryId>realm.com:TST_SRV:FALSE</entryId>
               <DIA-CFG-AuthReqContainer>
                <authReqContainerName>authReqContainerName</authReqContainerName>
                 <DIA-CFG-AppRouting operation="delete">
                  <requestedApp>193:19302</requestedApp>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AuthReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Example to delete the Routing from the RRT for an Accounting Application:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId>TST_SRV</stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId>TST_SRV</routingContainerId>
             <DIA-CFG-Drt>
              <entryId>realm.com:TST_SRV:TRUE</entryId>
               <DIA-CFG-AccReqContainer>
                <accReqContainerName>accReqContainerName</accReqContainerName>
                 <DIA-CFG-AppRouting operation="delete">
                  <requestedApp>193:19302</requestedApp>
                 </DIA-CFG-AppRouting>
               </DIA-CFG-AccReqContainer>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Pass the prepared XML file to shell:
ssh -p 830 <user_name>@<node_vip_address> -s -t ⇒ netconf < <xml_file>

<xml_file> refers to the XML file name.

Prepare an XML file according to the following template to delete the RRT Entry:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
      <XYZFunctionBranch>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId><applStackId></stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId><applStackId></routingContainerId>
             <DIA-CFG-Drt operation="delete">
              <entryId><entryId></entryId>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
    </XYZFunctionBranch>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Note:: The XYZFunctionBranch part can be composed of many elements depending on where the Diameter subtree is connected in the managed element structure. In the example below, we assume that the parent MOs are already created and the XYZFunctionBranch is empty.

Example to delete the RRT Entry:

<?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
    <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>]]>]]>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
  <target><running/></target>
   <config>
     <ManagedElement xmlns="urn:com:ericsson:ecim:ComTop">
     <managedElementId>1</managedElementId>
       <DIA-CFG-Application xmlns="urn:com:ericsson:ecim:dia_mim">
        <applicationName>DIA</applicationName>
         <DIA-CFG-StackContainer>
          <stackContainerId>TST_SRV</stackContainerId>
           <DIA-CFG-RoutingContainer>
            <routingContainerId>TST_SRV</routingContainerId>
             <DIA-CFG-Drt operation="delete">
              <entryId>realm.com:TST_SRV:TRUE</entryId>
             </DIA-CFG-Drt>
           </DIA-CFG-RoutingContainer>
         </DIA-CFG-StackContainer>
       </DIA-CFG-Application>
   </ManagedElement>
  </config>
</edit-config>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>]]>]]>

Pass the prepared XML file to shell:
ssh -p 830 <user_name>@<node_vip_address> -s -t ⇒ netconf < <xml_file>

<xml_file> refers to the XML file name.

1	Description
2	Procedure
2.1	Configure Realm Routing Table using CLI
2.2	Configure Realm Routing Table using NETCONF