| Attributes |
String1to01024DT
mandatory |
-
ldapServerAdminPassword
-
This attribute indicates the LDAP server password.
|
LdapServerUserNameDT
mandatory |
-
ldapServerAdminUsername
-
This parameter is used to store the Distinguished User Name of the LDAP server. The Admin Name DN used in the BIND command is the concatenation of the attributes ldapServerAdminUsername and ldapServerRootDn, separated by a comma. If the value of the ldapServerRootDn is changed, the Root DN part of the Admin Name will be set to the same value.
|
LdapServerEntryIdDT
key
mandatory
noNotification
restricted |
-
ldapServerEntryId
-
This attribute is the key of LdapServerEntry, which is used to store the LDAP server address in IP V4 or V6 address format with port, that is, IPaddress:port.
|
Integer1to00100DT
mandatory |
-
ldapServerPriority
-
A parameter used to store the priority of the configured LDAP server. The lower the value of this parameter represents the higher priority of the related LDAP server. Each server must be configured with a unique priority. The highest priority server is used as the primary server. The TCP connection is setup per LDAP server for all servers.
When the primary server is unavailable, the server with the next highest priority will be used. When the primary server is recovered, the next and subsequent requests will be sent to the primary server again even though the current server is still available.
If the priority of the servers is changed due to reconfiguration, the primary server will be reselected if the priority of the current primary server is not the highest one in the list.
|
LdapServerRootDT
mandatory |
-
ldapServerRootDn
-
This attribute indicates the root distinguished name of the LDAP server.
|
LdapServerVersionDT |
-
ldapServerVersion
=
v3
-
This attribute defines LDAP version supported by the LDAP server.
|