Check Alarm Status

1 Description

This instruction describes how to check the alarm status. The alarm status can be checked as part of preventive maintenance or problem resolution activities. In such situations, a detailed view of the active alarms in the managed element is required.

2 Procedure

2.1 Check Alarm Status

Prerequisites

No documents are required.
No tools are required.
The following condition must apply:
- An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

Steps

Navigate to the Fm managed object, for example:
>dn ManagedElement=NODE06ST,SystemFunctions=1,Fm=1
Show the alarm list:
(Fm=1)>show

Show the details of an alarm, for example:

(Fm=1)>show FmAlarm=1

The following is an example output:

FmAlarm=1
   activeSeverity=CRITICAL
   additionalText="The number of files exceeded threshold level <thresholdHigh>
    in ManagedElement=1,SystemFunctions=1,FileM=1,LogicalFs=1,FileGroup=1"
   eventType=Other
   lastEventTime="2017-04-20T10:59:11.137+02:00"
   majorType=193
   minorType=131073
   originalAdditionalText="The number of files exceeded threshold level <thresholdHigh>
    in ManagedElement=1,SystemFunctions=1,FileM=1,LogicalFs=1,FileGroup=1"
   originalEventTime="2017-04-20T10:59:11.137+02:00"
   originalSeverity=CRITICAL
   probableCause=343
   sequenceNumber=36
   source="ManagedElement=1,SystemFunctions=1,Fm=1,FmAlarmModel=FileManagement,=>
     FmAlarmType=FileMNoOfFilesExceeded"
     specificProblem="File Management, Number of Files in FileGroup Exceeded"

Show the detailed alarm status:

(Fm=1)>show-table -m FmAlarm -p fmAlarmId,source,activeSeverity,specificProblem

The following is an example output:

`fmAlarmId`	`Source`	`activeSeverity`	`specificProblem`
`1`	`ManagedElement=1,SystemFunctions=1,Fm=1,FmAlarmModel=FileManagement,⇒ FmAlarmType=FileMNoOfFilesExceeded`	`critical`	`File Management, Number of Files in FileGroup Exceeded`
`2`	`ManagedElement=NODE06ST,SystemFunctions=1,⇒ Brm=1,BrmBackupManager=SYSTEM_DATA,⇒ BrmBackupScheduler=SYSTEM_DATA`	`major`	`BRM, Scheduled Backup Failed`
`10`	`ManagedElement=NODE06ST,Conn=conn1,⇒ Stack=CSCFRF,Host=LABSPTOFFCHA2.ericsson.se`	`warning`	`Diameter, Link Disabled`