Contents
1 Description
This instruction describes how to disable and enable a given peer node configuration in the managed element.
A peer node configuration can be administratively disabled, for example, for maintenance reasons, or to introduce configuration changes. Disabling a peer node configuration prevents all connections between the own node and this peer node. A prerequisite to disabling a peer node configuration is that there are no established connections to the peer node.
A peer node configuration is enabled to make the configuration operational. This makes it possible to enable all configured outgoing connections to the peer node with one operation.
2 Procedure
2.1 Disable or Enable Peer Node
Prerequisites
- No documents are required.
- No tools are required.
- The following conditions must apply:
- The peer node to disable is known.
- No connections to the peer node are established.
- An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.
Steps
- Navigate to the DIA-CFG-PeerNodeContainer managed object, for example:
>dn ManagedElement=NODE06ST,XyzFunction=xyz,DIA-CFG-Application=DIA,DIA-CFG-StackContainer=abc,DIA-CFG-PeerNodeContainer=abc
- Navigate to the peer node to be disabled, for example:
(DIA-CFG-PeerNodeContainer=abc)>DIA-CFG-NeighbourNode=abc
- Enter Config mode:
(DIA-CFG-NeighbourNode=abc)>configure
- Disable the peer node:
(config-DIA-CFG-NeighbourNode=abc)>enabled=false
- Note:
- To enable a peer node, set enabled to true.
- Commit the setting:
(config-DIA-CFG-NeighbourNode=abc)>commit
- Note:
- Disabling a peer node configuration prevents all connections between the own node and the peer node. Alarm vDicos, Diameter Peer Node Disabled is issued when the peer node has been disabled.
- Verify that the peer node is disabled:
(DIA-CFG-NeighbourNode=abc)>show enabled
enabled=false