View Progress Report

1 Description

This instruction describes how to view the ongoing progress report or the result of the last backup operation. There is no historical information about earlier backup operation results.

2 Procedure

2.1 View Progress Report

Prerequisites

No documents are required.
No tools are required.
The following conditions must apply:
- A backup and restore management operation has been started.
  Note:
  Scheduled backups are automatically started when a scheduled event is triggered.
- An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

Steps

Navigate to the relevant managed object as follows:
- For a backup or delete operation, for example:
  >dn ManagedElement=NODE06ST,SystemFunctions=1,BrM=1,BrmBackupManager=SYSTEM_DATA
- For a restore operation, for example:
  >dn ManagedElement=NODE06ST,SystemFunctions=1,BrM=1,BrmBackupManager=SYSTEM_DATA,BrmBackup=PERF_BACKUP_NAME1_20140428_175907

Display the progress report for the operation as follows:

For a backup or delete operation:

(BrmBackupManager=SYSTEM_DATA)>show progressReport

The following is an example output:

(BrmBackupManager=SYSTEM_DATA)>show progressReport
progressReport
   actionId=0
   actionName="CREATE"
   additionalInfo
      "Create Backup for PERF_BACKUP_NAME1_20140428_175907: Initialized"
      "Create Backup for PERF_BACKUP_NAME1_20140428_175907: Succeeded"
   progressInfo=""
   progressPercentage=100
   result=SUCCESS
   resultInfo="PERF_BACKUP_NAME1_20140428_175907 was created successfully."
   state=FINISHED
   timeActionCompleted="2016-04-25T15:49:01"
   timeActionStarted="2016-04-25T15:39:53"
   timeOfLastStatusUpdate="2016-04-25T15:49:01"

For a restore operation:

(BrmBackup=PERF_BACKUP_NAME1_20140428_175907)>show progressReport

The following is an example output:

progressReport
   actionId=99
   actionName=""
   progressInfo=""
   progressPercentage=0
   result=NOT_AVAILABLE
   resultInfo=""
   state=FINISHED
   timeActionCompleted="1970-01-01T06:00:00"
   timeActionStarted="1970-01-01T06:00:00"
   timeOfLastStatusUpdate="1970-01-01T06:00:00"

Note:: Since a long-running operation can be executing, it can be required to enter the command several times until the final operation result is shown in the progress report.
An extra example of a progress report for the creation of a manual backup is shown in Example 1.

Progress information can be read displaying attributes in progressReport. The progression of the values of important attributes during execution of a backup operation is shown in Table 1.

If the operation is successful, subattribute result=SUCCESS.

If the operation is unsuccessful, subattribute result=FAILURE and subattribute resultInfo in attribute progressReport reports an explanatory text message.

Table 1 Progress Values for Main Subattributes
Subattribute Name	Initial Value	Next Value	Next Value	Next Value	Final Value
`progressPercentage`	`0`	`25`	`50`	`75`	`100`
`state`	`RUNNING`	`RUNNING`	`RUNNING`	`RUNNING`	`FINISHED`
`result`	`NOT_AVAILABLE`	`NOT_AVAILABLE`	`NOT_AVAILABLE`	`NOT_AVAILABLE`	`SUCCESS`
`timeActionCompleted`	`1970-01-01T01:00:00`	`1970-01-01T01:00:00`	`1970-01-01T01:00:00`	`1970-01-01T01:00:00`	`2013-12-31T19:00:00`

Note:: Value 1970-01-01T01:00:00 shown for subattribute timeActionCompleted is used by default when no real value exists yet.

Example 1 Manual Backup Progress Report

BrmBackupManager=SYSTEM_DATA
   backupDomain="BRM_SYSTEM_DATA"
   backupType="BRM_SYSTEM_DATA"
   asyncActionProgress
      actionId=0
      actionName="CREATE"
      additionalInfo[]
         ""
      progressInfo="PREPARE_PHASE is completed"
      progressPercentage=50
      result=NOT_AVAILABLE
      resultInfo=""
      state=RUNNING
      timeActionCompleted="1970-01-01T01:00:00"
      timeActionStarted="2014-05-01T10:25:06"
      timeOfLastStatusUpdate="2014-05-01T10:26:09"
   progressReport
      actionId=0
      actionName="CREATE"
      additionalInfo[]
         ""
      progressInfo="PREPARE_PHASE is completed"
      progressPercentage=50
      result=NOT_AVAILABLE
      resultInfo=""
      state=RUNNING
      timeActionCompleted="1970-01-01T01:00:00"
      timeActionStarted="2014-05-01T10:25:06"
      timeOfLastStatusUpdate="2014-05-01T10:26:09"
   BrmBackup=PERF_BACKUP_NAME1_20140428_175907
   BrmBackup=PERF_BACKUP_NAME1_20140501_100533
   BrmBackup=PERF_BACKUP_NAME1_20140501_100926
   BrmBackup=PERF_BACKUP_NAME1_20140501_101310
   BrmBackup=PERF_BACKUP_NAME1_20140501_102102
   BrmBackup=PERF_BACKUP_NAME1_20140501_102500