LPM, Load Regulation Limit Passed

1 Alarm Description

The alarm is raised when the monitored system resources exceed the configured load regulation thresholds.

Table 1 LPM, Load Regulation Limit Passed Alarm Causes
Alarm Cause	Description	Fault Reason	Fault Location	Impact
Incorrect dimensioning	The load regulation dimensioning is incorrect	System is not dimensioned to handle the engineered capacity	Dimensioning process	Calls are rejected by load regulation
Software fault leading to high resource use	A software fault leads to high resource use	Software fault	Leaked use of resources by software	Calls are rejected by load regulation

2 Procedure

2.1 Handle LPM, Load Regulation Limit Passed

Prerequisites

This instruction references the following document:
- Data Collection Guideline
No tools are required.
The following condition must apply:
- The alarm is raised.

Steps

Perform a health check, refer to Health Check documentation available in the library.
Perform data collection, refer to Data Collection Guideline.
Consult the next level of maintenance support. Further actions are outside the scope of this instruction.
Job is completed.

Copyright

© Ericsson AB 2015, 2017. All rights reserved. No part of this document may be reproduced in any form without the written permission of the copyright owner.

Disclaimer

The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from the use of this document.

Trademark List

All trademarks mentioned herein are the property of their respective owners. These are shown in the document Trademark Information.

LPM, Load Regulation Limit Passed