Contents

1   Description

This instruction describes how the administrator can lock a local Operation and Maintenance (O&M) user account.

2   Procedure

2.1   Lock User Account Administratively

Prerequisites

• No documents are required.
• No tools are required.
• The following conditions must apply:
  • The user has sufficient access rights to perform the task, for example, the user has Local Authentication Administrator role.
  • An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.
  • The username for the local user account is known. In this instruction, the username is joedoe.

Steps

1. Navigate to the UserAccountM Managed Object (MO), for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,SecM=1,UserManagement=1,LocalAuthenticationMethod=1,UserAccountM=1

2. Select the appropriate user account, for example:

   (UserAccountM=1)>UserAccount=joedoe

3. Enter Config mode:

   (UserAccount=joedoe)>configure

4. Set attribute administrativeState , for example:

   (config-UserAccount=joedoe)>administrativeState=LOCKED

5. Commit the settings:

   (config-UserAccount=joedoe)>commit

6. Verify the settings, for example:

   (UserAccount=joedoe)>show accountState

   The following is an example output:

   accountState=LOCKED

   (UserAccount=joedoe)>show lockedTime

   The following is an example output:

   lockedTime="2015-02-02T13:37:12Z"