Contents

1   Description

This instruction describes how to install a node credential online.

Installation of a node credential online includes an initial online enrollment of the node credential.

As shown in Figure 1, node credential installation with online enrollment consists of the following main steps:

1. Enrollment data preparation in the Managed Element (ME).
2. The online enrollment starts with a Managed Object (MO) action from the ME. The ME communicates with the enrollment servers at the Certification Authority (CA)/Registration Authority (RA) and installs the node credential. Enrollment action will automatically create chain certificates if they exists in the received enrollment data

For more information on how to configure an enrollment server group, refer to Configure Enrollment Server Group Together with Enrollment Servers.

2   Procedure

2.1   Install Node Credential Online

Prerequisites

• This instruction references the following document:
  • Configure Enrollment Server Group Together with Enrollment Servers
• No tools are required.
• The following conditions must apply:
  • The user has the System Security Administrator role.
  • The challenge password is known.
  • An EnrollmentAuthority Managed Object (MO) exists.
  • An EnrollmentServerGroup MO with at least one EnrollmentServer MO exists.
  • An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

Steps

1. Navigate to the CertM MO, for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,SecM=1,CertM=1

2. Enter Config mode:

   (CertM=1)>configure

3. Create the NodeCredential MO:

   (config-CertM=1)>NodeCredential=1

4. Set attribute subjectName, for example:

   (config-NodeCredential=1)>subjectName="C=SE,O=Ericsson,CN=node06st.ericsson.com"

   Note:  

   The only mandatory Relative Distinguished Name (RDN) required in the Distinguished Name (DN) is the Common Name (CN).

   The value CN=node06st.ericsson.com is an example value. From a certificate syntax point of view, also other values such as CN=NODE06ST are valid. The value that is to be configured in the CN depends on the security policy in the organization for which the ME is installed. It also depends on the information the peer expects to receive in a certificate from the ME when the peer tries to connect to the ME using the service for which this node credential is used.

   
   
5. Set attribute keyInfo, for example:

   (config-NodeCredential=1)>keyInfo=RSA_2048

   Note:  

   Only RSA keys are supported for online enrollment. Deprecated key types are not recommended for new enrollments.

   
   
6. Set attribute enrollmentServerGroup, for example:

   (config-NodeCredential=1)>enrollmentServerGroup="ManagedElement=NODE06ST,SystemFunctions=1,SecM=1,CertM=1,EnrollmentServerGroup=1"

7. Set attribute enrollmentAuthority, for example:

   (config-NodeCredential=1)>enrollmentAuthority="ManagedElement=NODE06ST,SystemFunctions=1,SecM=1,CertM=1,EnrollmentAuthority=1"

8. Modify the default enrollmentTimer value, if needed, for example:

   (config-NodeCredential=1)>enrollmentTimer=90

   Note:  

   The default value for attribute enrollmentTimer is 60 minutes.

   
   
9. Commit the settings:

   (config-NodeCredential=1)>commit

10. Verify the settings:

    (NodeCredential=1)>show -v

    The following is an example output:

    NodeCredential=1 [...] enrollmentAuthority="ManagedElement=NODE06ST,⇒ SystemFunctions=1,SecM=1,CertM=1,EnrollmentAuthority=1" enrollmentServerGroup="ManagedElement=NODE06ST,⇒ SystemFunctions=1,SecM=1,CertM=1,EnrollmentServerGroup=1" enrollmentTimer=90 expiryAlarmThreshold=30 <default> keyInfo=RSA_2048 nodeCredentialId="1" renewalMode=MANUAL <default> reservedByUser=[] <empty> <read-only> subjectName="C=SE,O=Ericsson,CN=node06st.ericsson.com" userLabel=[] <empty> certificateContent=[] <empty> <read-only> [...]

11. Start the enrollment together with parameter challengePassword, for example:

    (NodeCredential=1)>startOnlineEnrollment --challengePassword enrollmentChallengePassw

    The system returns output true or false.

    Note:  

    An online initial enrollment requires a shared secret between the node and the enrollment authority. If a challenge password is used as a shared secret, action startOnlineEnrollment must be called together with the password.

    
    
12. Verify the result information of the nodeCredentialId enrollment:

    (NodeCredential=1)>show enrollmentProgress

    After a successful online enrollment, the system returns the following:

    [...] result=SUCCESS resultInfo="installed from the online service" [...]

    If an error occurs during the execution of the online enrollment, attribute enrollmentProgress shows result=FAILURE and attribute resultInfo shows the cause of the failure. Repair the failure and restart the enrollment if needed.