Contents

1   Description

This instruction describes how to stop a measurement collection job.

In maintenance situations, the user can suspend a measurement collection job to avoid the creation and exposure of unreliable performance report files to the management system when the Managed Element (ME) is unstable. This is also a way to reduce the load on the ME.

2   Procedure

2.1   Stop Measurement Collection Job

Prerequisites

• No documents are required.
• No tools are required.
• The following conditions must apply:
  • The job name is known.

    In this instruction, the job name example is POT_15min_Job.

  • currentJobState is ACTIVE.
  • An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

Steps

1. Navigate to the PmJob managed object, for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,Pm=1,PmJob=POT_15min_Job

2. Enter Config mode:

   (PmJob=POT_15min_Job)>configure

3. Set the PmJob state to STOPPED:

   (config-PmJob=POT_15min_Job)>requestedJobState=STOPPED

4. Commit the PmJob configuration:

   (config-PmJob=POT_15min_Job)>commit

5. Verify the result:

   (PmJob=POT_15min_Job)>show -v

   The following is an example output:

   PmJob=POT_15min_Job compressionType=[] <empty> currentJobState=STOPPED <read-only> granularityPeriod=FIFTEEN_MIN <default> jobControl=FULL <default> <read-only> jobGroup=[] <empty> jobPriority=MEDIUM <default> jobType=MEASUREMENTJOB <default> pmJobId="POT_15min_Job" reportContentGeneration=CHANGED_ONLY <default> reportingPeriod=FIFTEEN_MIN <default> requestedJobState=STOPPED MeasurementReader=POT_mr