Contents

1   Description

This instruction describes how to stop a threshold monitoring job. In maintenance situations, the user can suspend a threshold monitoring job to avoid forwarding threshold alarms to the management system when the Managed Element (ME) is unstable and already given specific attention. This is also a way to reduce the load on the ME.

2   Procedure

2.1   Stop Threshold Monitoring Job

Prerequisites

• No documents are required.
• No tools are required.
• The following conditions must apply:
  • The job name is known.

    In this instruction, the job name example is POT_Thr_Job.

  • An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

Steps

1. Navigate to the PmJob managed object, for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,Pm=1,PmJob=POT_Thr_Job

2. Enter Config mode:

   (PmJob=POT_Thr_Job)>configure

3. Set the PmJob state to STOPPED:

   (config-PmJob=POT_Thr_Job)>requestedJobState=STOPPED

4. Commit the PmJob configuration:

   (config-PmJob=POT_Thr_Job)>commit

5. Verify the result:

   (PmJob=POT_Thr_Job)>show -v

   The following is an example output:

   PmJob=POT_Thr_Job compressionType=[] <empty> currentJobState=STOPPED <read-only> granularityPeriod=FIFTEEN_MIN <default> jobControl=FULL <default> <read-only> jobGroup=[] <empty> jobPriority=MEDIUM <default> jobType=THRESHOLDJOB pmJobId="POT_Thr_Job" reportContentGeneration=CHANGED_ONLY <default> reportingPeriod=FIFTEEN_MIN <default> requestedJobState=STOPPED MeasurementReader=POT_mr