Contents

1   Description

This instruction describes how to configure the SNMP Master Agent with engineId.

2   Procedure

2.1   Configure SNMP Master Agent with engineId

Prerequisites

• No documents are required.
• No tools are required.
• The following conditions must apply:
  • An Ericsson Command-Line Interface (ECLI) in exec mode is in progress.

Steps

1. Navigate to the Snmp Managed Object (MO), for example:

   >dn ManagedElement=1,SystemFunctions=1,SysM=1,Snmp=1

2. Enter Config mode:

   (Snmp=1)>configure

3. Configure the SNMP Master Agent with an engineId which can be a string, for example:

   (config-Snmp=1)>engineId="1234567890"

4. Commit the settings:

   (config-Snmp=1)>commit

5. Verify the settings:

   (Snmp=1)>show -v

   The following is an example output:

   Snmp=1 administrativeState=UNLOCKED <default> enableSourceCheckForV1V2C=false <default> engineId="1234567890" nodeCredential="ManagedElement=1,SystemFunctions=1,⇒ SecM=1,CertM=1,NodeCredential=nc1" operationalState=ENABLED <read-only> port=161 <default> portDtls=10161 <default> snmpId="1" trustCategory="ManagedElement=1,SystemFunctions=1,⇒ SecM=1,CertM=1,TrustCategory=tc1" agentAddress[@1] host="127.0.0.1" port=161 agentAddressDtls[@1] host="127.0.0.1" port=10161

Note:  

If SNMP stack cannot support setting the engineId, then the applied value is ignored, keeping the current empty value.

The engineId attribute is optional. If not set by NBI user, then a random engineId, generated by netSNMP library, is used.