Contents
1 Description
This instruction describes how to delete an upgrade package managed object. It can be done once an upgrade package has been applied and is no longer needed on the Managed Element (ME).
- Note:
- If the upgrade file initially was retrieved from a Uniform Resource Identifier (URI), this operation deletes it together with the managed object. If the upgrade package file initially was downloaded with the SSH File Transfer Protocol (SFTP), this operation does not delete it from the ME.
2 Procedure
2.1 Delete Upgrade Package
Prerequisites
- No documents are required.
- No tools are required.
- The following conditions must apply:
- An UpgradePackage managed object for which the corresponding software version or a later software version is present exists.
- An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.
Steps
- Navigate to the SwM managed object, for example:
>dn ManagedElement=NODE06ST,SystemFunctions=1,SwM=1
- Check the available upgrade packages:
(SwM=1)>show -v
The following example output shows an upgrade package managed object targeting an upgrade of the software version to the revision already activated is visible. The upgrade package is no longer applicable to the current software version and can be deleted.
SwM=1 [...] UpgradePackage=UpgradePackage=ERIC_UP-CXP9020355_1-R7F01
- Delete the UpgradePackage managed
object, for example:
(SwM=1)>removeUpgradePackage ManagedElement=NODE06ST,SystemFunctions=1,SwM=1,UpgradePackage=ERIC_UP-CXP9020355_1-R7F01
The system returns output true or false.
- Verify the success of the deletion operation and that
the UpgradePackage managed
object is deleted:
(SwM=1)>show -v
The following example output shows the final result. If state=RUNNING, the operation is not yet completed. Result result=FAILURE means that the deletion failed.
SwM=1 [...] reportProgress <read-only> actionName="RemoveUpgradePackage" <read-only> [...] result=SUCCESS <read-only> [...] state=FINISHED <read-only> [...]