NetworkInterfaceDT
key
mandatory
noNotification
restricted |
-
scscfNetworkInterfaceEntry
-
This attribute defines the network interface the S-CSCF uses to receive and send SIP traffic. To add an interface the parameter CscfISPBehavior must also first be set to a behavior that support this interface. One UDP transport address with traffic direction Irrelevant is mandatory for the CscfISPOperationalState parameter to become ENABLED and domain name entries must be in the internal DNS table as well. A TCP transport address can optionally be added but must be configured with the same port-nr, traffic direction and IP-address as the UDP interface for CscfISPOperationalState to become ENABLED. One IPv4 and/or one IPv6 address can be specified for each transport type. Maximum one UDP and one TCP interface per IP address type (IPv4 and IPv6) can be added. It is required to put the node in locked state when removing network interface entries. However, it is not required to put the node in locked state when adding network interface entries.
Note: A prerequisite for adding this network interface is that the ScscfDomainNameEntry already has been configured with at least one domain.
Note: A prerequisite for specifying an IPv6 address is that the parameter CscfHostportAsFqdnOnly is set to true.
|