Deactivate Emergency Unlock Mode

Contents


1   Description

This instruction describes how to deactivate the Emergency Unlock mode. The user can deactivate the Emergency Unlock mode before it automatically ends to check that the managed element transitions to the expected License Management operation mode.

2   Procedure

2.1   Deactivate Emergency Unlock Mode

Prerequisites

Steps

  1. Navigate to the EmergencyUnlock managed object, for example:

    >dn ManagedElement=NODE06ST,SystemFunctions=1,Lm=1,EmergencyUnlock=1

  2. Deactivate the Emergency Unlock mode:

    (EmergencyUnlock=1)>deactivate

    The system returns true if the operation is successful.

  3. Verify that the Emergency Unlock mode was deactivated:

    (EmergencyUnlock=1)>show activationState

    The system returns activationState=INACTIVE if the Emergency Unlock mode now is deactivated.



Copyright

© Ericsson AB 2014–2017. All rights reserved. No part of this document may be reproduced in any form without the written permission of the copyright owner.

Disclaimer

The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from the use of this document.

Trademark List
All trademarks mentioned herein are the property of their respective owners. These are shown in the document Trademark Information.

    Deactivate Emergency Unlock Mode