Cancel Offline Enrollment

Contents

1Introduction
1.1Prerequisites

2

Procedure

1   Introduction

This document describes how to cancel an ongoing offline node credential enrollment that is in RUNNING state.

1.1   Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1   Conditions

The following conditions must apply:

2   Procedure

To cancel an ongoing offline node credential enrollment:

  1. Navigate to CertM Managed Object (MO), for example:

    >dn ManagedElement=NODE06ST,SystemFunctions=1,SecM=1,CertM=1

  2. Select the NodeCredential MO, for example:

    (CertM=1)>NodeCredential=2

  3. Cancel the enrollment:

    (NodeCredential=2)>cancelEnrollment

  4. Verify the result:

    (NodeCredential=2)>show enrollmentProgress

    [...]
    result=FAILURE
    resultInfo="the enrollment started by ⇒
    startOfflineCsrEnrollment canceled"
    state=CANCELLED
    [...]

    The enrollment cancellation automatically deletes the CSR file from the managed element.



Copyright

© Ericsson AB 2014, 2015, 2016. All rights reserved. No part of this document may be reproduced in any form without the written permission of the copyright owner.

Disclaimer

The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from the use of this document.

Trademark List
All trademarks mentioned herein are the property of their respective owners. These are shown in the document Trademark Information.

    Cancel Offline Enrollment