Contents

1   Introduction

This document describes how to delete a scheduled event. Deleting a scheduled event prevents the associated scheduled health check jobs from occurring.

A scheduled event can be deleted when no longer needed because of, for example, a new preventive maintenance strategy.

1.1   Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1   Conditions

The following conditions must apply:

• The health check job name is known.
• The scheduled event name to delete is known.
• An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

2   Procedure

To delete a scheduled event:

1. Navigate to the HealthCheckM Managed Object (MO):

   >dn ManagedElement=<node_name>,SystemFunctions=1,HealthCheckM=1

   Note:  

   The string node_name is specific for the Managed Element (ME).

   
   
2. Navigate to the health check job for which the scheduled event must be deleted, for example:

   (HealthCheckM=1)>HcJob=jobName

   Note:  

   The string jobName is the health check job name.

   
   
3. Navigate to the health check job scheduler associated to the health check job:

   (HcJob=jobName)>HcJobScheduler=1

4. Show the list of scheduled events:

   (HcJobScheduler=1)>show

   This command is useful to retrieve the scheduled event name in case it is unknown.

   The following is an example output:

   HcSingleEvent=S_EVENT_201505_003 HcSingleEvent=S_EVENT_201505_004 HcSingleEvent=S_EVENT_201505_005

5. Enter Config mode:

   (HcJobScheduler=1)>configure

6. Delete the scheduled event, for example:

   (config-HcJobScheduler=1)>no HcSingleEvent=S_EVENT_201505_003

7. Commit the change:

   (config-HcJobScheduler=1)>commit

8. Verify that the event has been deleted:

   (HcJobScheduler=1)>show

   The event is no longer shown in the output.

   The following is an example output:

   HcSingleEvent=S_EVENT_201505_004 HcSingleEvent=S_EVENT_201505_005