Update License Information

Contents

1Introduction
1.1Prerequisites

2
Procedure

1   Introduction

This document describes how to update license Information.

The information about available licenses and their use is published in the Management Information Base (MIB) as CapacityKey and FeatureKey Managed Object (MOs) after a license key file has been installed. This read-only information is updated every 30 minutes.

However, after a license key file has been installed, it is recommended to ensure that the latest information is reflected in the MIB. It is done by triggering an immediate update of the license information.

1.1   Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1   Conditions

The following condition must apply:

2   Procedure

To update license information:

  1. Navigate to the Lm MO, for example:

    >dn ManagedElement=NODE06ST,SystemFunctions=1,Lm=1

  2. Update license information:

    (Lm=1)>publishLicenseInventory

    The system returns true if the operation is successful.

  3. Verify that the license information has been updated by checking the timestamp:

    (Lm=1)>show lastInventoryChange

    The system returns a recent timestamp, for example:

    lastInventoryChange="2015-05-25T00:00:00"


Copyright

© Ericsson AB 2014, 2015. All rights reserved. No part of this document may be reproduced in any form without the written permission of the copyright owner.

Disclaimer

The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from the use of this document.

Trademark List
All trademarks mentioned herein are the property of their respective owners. These are shown in the document Trademark Information.

    Update License Information