| Attributes |
string |
-
aaaServerId
=
0
-
Specifies the WLAN AAA server Id.
The default value is "0".
Takes effect: After next restart
|
uint16 |
-
acctInterimInterval
=
600
{
60..65535
}
-
Specifies the value of WLAN Acct-Interim-Interval.
The default value is 600.
Takes effect: After next restart
|
boolean |
-
gprsApnCheckEnabled
=
false
-
Specifies if the WLAN GPRS APN is enabled.
The default value is false.
Takes effect: After next restart
|
string
key
mandatory
noNotification
restricted |
-
iWlanConfigId
-
The value component of the RDN.
|
boolean |
-
mandatoryChargingCharacter
=
false
-
Specifies if WLAN mandatory Charging Characteristics is enabled.
The default value is false.
Takes effect: After next restart
|
boolean |
-
mandatoryCUI
=
false
-
Specifies if WLAN mandatory CUI is enabled.
The default value is false.
Takes effect: After next restart
|
uint8 |
-
odbHPLMNDataBit
=
2
{
0..32
}
-
IPWorks AAA server assumes that the HLR uses the Operator Determined Barring HPLMN data parameters to specify the ability of WiFi Subscription.
1~32: Specifying the used bit
0: Skipping the check
Other: Causing the traffic failure
The default value is 2.
Unit: 1 bit
Takes effect: After next restart
|
boolean |
-
s2aEnabled
=
false
-
Specifies if the WLAN S6a is enabled.
The default value is false.
Takes effect: After next restart
|
uint32 |
-
sessionTimeout
=
86400
-
Specifies the value of WLAN Session-Timeout.
The default value is 86400.
Takes effect: After next restart
|
WLANSubscriptionMode |
-
subscriptionAuthzMode
=
ODB_MODE
-
Specifies the WLAN subscription Authz Mode, the default value is ODB_MODE.
ODB_MODE
APN_MODE
Takes effect: After next restart
|
TerminationAction |
-
terminationAction
=
NO_RADIUS_REQUEST
-
Specifies the WLAN Termination-Action:
NO_RADIUS_REQUEST
RADIUS_REQUEST
The default value is NO_RADIUS_REQUEST.
Takes effect: After next restart
|
boolean |
-
userNameShowIMSI
=
false
-
Specifies if the WLAN uses IMSI as UserName.
The default value is false.
Takes effect: After next restart
|
uint16 |
-
userRateType
=
0
-
Specifies the WLAN User Rate Type.
The default value is 0.
Takes effect: After next restart
|
string |
-
wlan3gppChargingCharacter
=
0000
-
Specifies the WLAN 3GPP Charging Characteristics.
The default value is "0000".
Takes effect: After next restart
|
string |
-
wlan3gppGprsNegQosProfile
=
05-0A11012901010111050101100101
-
Specifies the Wlan 3GPP GPRS Negotiated QoS Profile.
The default value is "05-0A11012901010111050101100101".
Takes effect: After next restart
|