Contents
1 Introduction
This document describes the Performance Measurements for IPWorks.
1.1 Related Information
Typographic conventions, definition, and explanation of abbreviations and terminology can be found in the following documents:
2 Term Definitions
The terms used in the following sections are defined as follows:
| Measurement Name | The name of the measurement being described. | |
| Measurement Type | The four types of 3GPP standard measurements (counter, gauge, status inspection, and discrete event registration) used to report data. | |
| Counter |
A counter is a measurement type that is
used to report cumulative, incremental integer variables. An occurrence
of an event increases the counter. For the details about the measurement type Collection Method and Aggregation, refer to the section Measurement Parameters in IPWorks Performance Measurements. | |
| Performance Measurement Group | Represents a logical grouping of Measurement Type objects so that these objects can be referred to as a group instead of individual objects. | |
| Cluster level | The whole cluster uses the same measured instance name. For example, AAA-DIA. | |
| Node level | Each node uses the specific node name and uuid as the measured instance name. For example, PL-3_5D9F7212-20FA-4D40-A7DF-F91214E54534. | |
3 Measurements for DNS
This section provides the performance measurement data regarding DNS. In addition, the default PM job is described for each performance measurement group.
3.1 DnsQueryStatisticsGroup
This performance measurement group, called DnsQueryStatisticsGroup, contains measurements for events which are related to DNS query. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DnsQueryStatisticsGroup
The default PM job, which is a measurement collection job, is DnsQueryDefaultJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsQueryDefaultJob.
The default job with the default value is as follows:
PmJob=DnsQueryDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DnsQueryDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,
PmGroup=DnsQueryStatisticsGroup"
measurementTypeRef=[] <empty>
|
This performance measurement group includes following measurements:
- ipworksDnsServQuerySuccess
- ipworksDnsServQueryReferral
- ipworksDnsServQueryNxrrset
- ipworksDnsServQueryNxdomain
- ipworksDnsServQueryRecursion
- ipworksDnsServQueryFailure
- ipworksDnsServEnumQueryRecursion
- ipworksDnsServQueryXfr
- ipworksDnsServQueryXfrFailure
- ipworksDnsServQueryTotal
3.1.1 ipworksDnsServQuerySuccess
|
Attribute |
Value |
|---|---|
|
Description |
|
|
Condition |
The value is incremented for every successful processing of DNS query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsQueryStatisticsGroup |
3.1.2 ipworksDnsServQueryReferral
|
Attribute |
Value |
|---|---|
|
Description |
The number of query that DNS server responds a referral in the current GP. |
|
Condition |
The value is incremented when DNS server responds to a query with a referral. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsQueryStatisticsGroup |
3.1.3 ipworksDnsServQueryNxrrset
|
Attribute |
Value |
|---|---|
|
Description |
The number of DNS query with the return result "NXRRSET" in the current GP. |
|
Condition |
The value is incremented for every DNS query with the return result "NXRRSET". |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsQueryStatisticsGroup |
3.1.4 ipworksDnsServQueryNxdomain
|
Attribute |
Value |
|---|---|
|
Description |
The number of DNS query with the return result "NXDOMAIN" in the current GP. |
|
Condition |
The value is incremented for every DNS query with the return result "NXDOMAIN". |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsQueryStatisticsGroup |
3.1.5 ipworksDnsServQueryRecursion
|
Attribute |
Value |
|---|---|
|
Description |
|
|
Condition |
The value is incremented for every DNS recursion query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsQueryStatisticsGroup |
3.1.6 ipworksDnsServQueryFailure
|
Attribute |
Value |
|---|---|
|
Description |
|
|
Condition |
The value is incremented for every failed DNS query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsQueryStatisticsGroup |
3.1.7 ipworksDnsServEnumQueryRecursion
|
Attribute |
Value |
|---|---|
|
Description |
The number of ENUM recursion query to a specific DNS server in the current GP. |
|
Condition |
The value is incremented for every ENUM recursion query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsQueryStatisticsGroup |
3.1.8 ipworksDnsServQueryXfr
|
Attribute |
Value |
|---|---|
|
Description |
The number of successful transfer of DNS query in the current GP. |
|
Condition |
The value is incremented when successfully update DNS server with transferring functionality. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsQueryStatisticsGroup |
3.1.9 ipworksDnsServQueryXfrFailure
|
Attribute |
Value |
|---|---|
|
Description |
The number of failed transfer of DNS query in the current GP. |
|
Condition |
The value is incremented when update DNS server with transferring none functionality. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsQueryStatisticsGroup |
3.1.10 ipworksDnsServQueryTotal
|
Attribute |
Value |
|---|---|
|
Description |
|
|
Condition |
The value is incremented for every DNS query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsQueryStatisticsGroup |
3.2 DnsForwardStatisticsGroup
This performance measurement group, called DnsForwardStatisticsGroup, contains measurements related to the queries that DNS forwards to another DNS for recursive query. The directory of the performance measurement group MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DnsForwardStatisticsGroup
The default PM job, which is a measurement collection job, is DnsForwardDefaultJob . The directory of the default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsForwardDefaultJob.
The default job with the default value is as follows:
PmJob=DnsForwardDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DnsForwardDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,
PmGroup=DnsForwardStatisticsGroup"
measurementTypeRef=[] <empty>
|
This performance measurement group includes following measurements:
3.2.1 ipworksDnsServForwardFailure
|
Attribute |
Value |
|---|---|
|
Description |
The number of total unsuccessful queries that DNS forwards to another DNS for recursive query in the current GP. |
|
Condition |
The value is incremented for every unsuccessful query which DNS forwards to another DNS for recursive query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsForwardStatisticsGroup |
3.2.2 ipworksDnsServForwardTotal
|
Attribute |
Value |
|---|---|
|
Description |
The number of total recursive queries that DNS forwards to another DNS for recursive query in the current GP. |
|
Condition |
The value is incremented for every query which DNS forwards to another DNS for recursive query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsForwardStatisticsGroup |
3.3 DnsUpdateStatisticsGroup
This performance measurement group, called DnsUpdateStatisticsGroup, contains measurements for events which are related to DNS update requests. The directory of the performance measurement group MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DnsUpdateStatisticsGroup
The default PM job, which is a measurement collection job, is DnsUpdateDefaultJob. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsUpdateDefaultJob
The default PM job with the default value is as follows:
PmJob=DnsUpdateDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DnsUpdateDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,
PmGroup=DnsUpdateStatisticsGroup"
measurementTypeRef=[] <empty>
|
This performance measurement group includes following measurements:
- ipworksDnsServUpdateSuccess
- ipworksDnsServUpdateFailure
- ipworksDnsServUpdateForward
- ipworksDnsServUpdateRefused
- ipworksDnsServUpdateTotal
3.3.1 ipworksDnsServUpdateSuccess
|
Attribute |
Value |
|---|---|
|
Description |
The number of successful processing of DNS update requests in the current GP. |
|
Condition |
The value is incremented when a DNS update request is processed successfully. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsUpdateStatisticsGroup |
3.3.2 ipworksDnsServUpdateFailure
|
Attribute |
Value |
|---|---|
|
Description |
|
|
Condition |
The value is incremented when a DNS update is processed but failed. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsUpdateStatisticsGroup |
3.3.3 ipworksDnsServUpdateForward
|
Attribute |
Value |
|---|---|
|
Description |
The number of DNS updates that were forwarded to other DNS servers in the current GP. |
|
Condition |
The value is incremented when a DNS update is forwarded to other DNS servers. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsUpdateStatisticsGroup |
3.3.4 ipworksDnsServUpdateRefused
|
Attribute |
Value |
|---|---|
|
Description |
The number of DNS updates refused for security reasons in the current GP. |
|
Condition |
The value is incremented when a DNS update is refused due to security reasons. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsUpdateStatisticsGroup |
3.3.5 ipworksDnsServUpdateTotal
|
Attribute |
Value |
|---|---|
|
Description |
|
|
Condition |
The value is incremented when a DNS update is received. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsUpdateStatisticsGroup |
3.4 DnsTSIGStatisticsGroup
This performance measurement group, called DnsTSIGStatisticsGroup, contains measurements for events which are related to DNS packets with TSIG signatures. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DnsTSIGStatisticsGroup
The default PM job, which is a measurement collection job, is DnsTSIGDefaultJob. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsTSIGDefaultJob
The default PM job with the default value is as follows:
PmJob=DnsTSIGDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DnsTSIGDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,
PmGroup=DnsTSIGStatisticsGroup"
measurementTypeRef=[] <empty>
|
This performance measurement group includes following measurements:
3.4.1 ipworksDnsServTSIGSuccess
|
Attribute |
Value |
|---|---|
|
Description |
The number of DNS packets with valid TSIG signatures in the current GP. |
|
Condition |
The value is incremented for every successful processing of a packet due to valid TSIG key. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsTSIGStatisticsGroup |
3.4.2 ipworksDnsServTSIGFailure
|
Attribute |
Value |
|---|---|
|
Description |
The number of DNS packets with invalid TSIG signatures in the current GP. |
|
Condition |
The value is incremented for every processing of a DNS packet which resulted in failure due to invalid TSIG keys. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsTSIGStatisticsGroup |
3.5 DnsDNSSECStatisticsGroup
This performance measurement group, called DnsDNSSECStatisticsGroup, contains measurements for events which are related to DNSSEC signatures processed. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DnsDNSSECStatisticsGroup
The default PM job, which is a measurement collection job, is DnsSECDefaultJob. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsSECDefaultJob
The default PM job with the default value is as follows:
PmJob=DnsSECDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DnsSECDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,
PmGroup=DnsDNSSECStatisticsGroup"
measurementTypeRef=[] <empty>
|
This performance measurement group includes following measurements:
3.5.1 ipworksDnsServDNSSECSuccess
|
Attribute |
Value |
|---|---|
|
Description |
The number of DNSSEC valid signatures processed in the current GP. |
|
Condition |
The value is incremented for every successfully processed DNSSEC valid signature. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsDNSSECStatisticsGroup |
3.5.2 ipworksDnsServDNSSECFailure
|
Attribute |
Value |
|---|---|
|
Description |
The number of invalid DNSSEC signatures processed in the current GP. |
|
Condition |
The value is incremented for every unsuccessfully processed DNSSEC invalid signature. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsDNSSECStatisticsGroup |
3.6 DnsASDNSStatisticsGroup
This performance measurement group, called DnsASDNSStatisticsGroup, contains measurements for events which are related to ActiveSelect DNS monitor packets. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DnsASDNSStatisticsGroup
The default PM job, which is a measurement collection job, is DnsASDNSDefaultJob. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsASDNSDefaultJob
The default PM job with the default value is as follows:
PmJob=DnsASDNSDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DnsASDNSDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,
PmGroup=DnsASDNSStatisticsGroup"
measurementTypeRef=[] <empty>
|
This performance measurement group includes following measurements:
- ipworksDnsServASDNSSuccess
- ipworksDnsServASDNSFailure
- ipworksDnsServASDNSRefused
- ipworksDnsServASDNSTotal
3.6.1 ipworksDnsServASDNSSuccess
|
Attribute |
Value |
|---|---|
|
Description |
The number of ActiveSelect DNS monitor information packets in the current GP. |
|
Condition |
The value is incremented for every successful processing of packets received from ASDNS monitor. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsASDNSStatisticsGroup |
3.6.2 ipworksDnsServASDNSFailure
|
Attribute |
Value |
|---|---|
|
Description |
The number of ActiveSelect DNS monitor packets that had errors in the current GP. |
|
Condition |
The value is incremented for every processing of a packet received from an ASDNS monitor, which resulted in a failure due to invalid format or other problems. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsASDNSStatisticsGroup |
3.6.3 ipworksDnsServASDNSRefused
|
Attribute |
Value |
|---|---|
|
Description |
The number of ActiveSelect DNS monitor packets that were refused for security reasons in the current GP. |
|
Condition |
The value is incremented for every processing of a packet received from an ASDNS monitor which resulted in a failure due to mismatch of TSIG Keys. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsASDNSStatisticsGroup |
3.6.4 ipworksDnsServASDNSTotal
|
Attribute |
Value |
|---|---|
|
Description |
The number of total ActiveSelect DNS monitor packets in the current GP. |
|
Condition |
The value is incremented for every processing of a packet received from an ASDNS monitor. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsASDNSStatisticsGroup |
3.7 DnsNotifyStatisticsGroup
This performance measurement group, called DnsNotifyStatisticsGroup, contains measurements related to DNS notify events. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DnsNotifyStatisticsGroup
The default PM job, which is a measurement collection job, is DnsNotifyDefaultJob. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsNotifyDefaultJob
The default PM job with the default value is as follows:
PmJob=DnsNotifyDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DnsNotifyDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,
PmGroup=DnsNotifyStatisticsGroup"
measurementTypeRef=[] <empty>
|
This performance measurement group includes following measurements:
3.7.1 ipworksDnsServNotifyFailure
|
Attribute |
Value |
|---|---|
|
Description |
The number of failed notifies. |
|
Condition |
The value is incremented when a notify message is failed to process in the current GP. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsNotifyStatisticsGroup |
3.7.2 ipworksDnsServNotifyTotal
|
Attribute |
Value |
|---|---|
|
Description |
The number of total notifies. |
|
Condition |
The value is incremented when a notify message is received in the current GP. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsNotifyStatisticsGroup |
3.8 DnsPerBladeStatisticsGroup
This performance measurement group, called DnsPerBladeStatisticsGroup, contains measurements for events which are related to DNS in node level. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DnsPerBladeStatisticsGroup
This performance measurement group contains two types of PM jobs, measurement collection job and threshold monitoring job.
The default measurement collection job for this performance measurement group is DnsPerBladeDefaultJob. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsPerBladeDefaultJob
The default PM job with the default value is as follows:
PmJob=DnsPerBladeDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DnsPerBladeDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,
PmGroup=DnsPerBladeStatisticsGroup"
measurementTypeRef=[] <empty>
|
In addition to the default measurement collection job, the performance measurement group includes the following default threshold monitoring jobs:
- DnsForwardFailureRateDefaultJob, see Section 3.8.2
- DnsQueryFailureRateDefaultJob, see Section 3.8.3
- DnsTPSDefaultJob, see Section 3.8.4
This performance measurement group includes following measurements:
- ipworksDnsServConfigUpTime
- ipworksDnsServForwardFailureRate
- ipworksDnsServQueryFailureRate
- ipworksDnsServTransactionPerSecond
3.8.1 ipworksDnsServConfigUpTime
|
Attribute |
Value |
|---|---|
|
Description |
The number of seconds elapse since the DNS service starts. |
|
Condition |
The value is incremented every second since the DNS service process starts in the current node. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsPerBladeStatisticsGroup |
3.8.2 ipworksDnsServForwardFailureRate
The default PM job, which is a threshold monitoring job, for this measurement is DnsForwardFailureRateDefaultJob. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsForwardFailureRateDefaultJob
The default PM job with the default value is follows:
PmJob=DnsForwardFailureRateDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=ONE_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=THRESHOLDJOB
pmJobId="DnsForwardFailureRateDefaultJob"
reportingPeriod=ONE_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef=[] <empty>
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,
PmGroup=DnsPerBladeStatisticsGroup,
MeasurementType=ipworksDnsServForwardFailureRate"
PmThresholdMonitoring=Thres-ForwardFailureRate-WARNING
pmThresholdMonitoringId="Thres-ForwardFailureRate-WARNING"
thresholdHigh=30
thresholdLow=25
thresholdSeverity=WARNING
|
|
Attribute |
Value |
|---|---|
|
Description |
The failure rate of unsuccessful queries that DNS forwards to another DNS for recursive query in the current GP.(1) |
|
Condition |
The average value of the failure rates (which are sampled and calculated every 10 seconds) of unsuccessful queries that DNS forwards to another DNS in the current GP. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsPerBladeStatisticsGroup |
(1) The value
might be inaccurate when the traffic is not stable or the total traffic
is extremely low.
3.8.3 ipworksDnsServQueryFailureRate
The default PM job, which is a threshold monitoring job, for this measurement is DnsQueryFailureRateDefaultJob. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsQueryFailureRateDefaultJob
The default PM job with the default value is as follows:
PmJob=DnsQueryFailureRateDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=ONE_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=THRESHOLDJOB
pmJobId="DnsQueryFailureRateDefaultJob"
reportingPeriod=ONE_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef=[] <empty>
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,
Pm=1,PmGroup=DnsPerBladeStatisticsGroup,
MeasurementType=ipworksDnsServQueryFailureRate"
PmThresholdMonitoring=Thres-QueryFailureRate-WARNING
pmThresholdMonitoringId="Thres-QueryFailureRate-WARNING"
thresholdHigh=30
thresholdLow=25
thresholdSeverity=WARNING
|
|
Attribute |
Value |
|---|---|
|
Description |
The failure rate of failed DNS query in the current GP.(1) In IPWorks, the following cases are counted as DNS query failure:
|
|
Condition |
The average value of the failure rates (which are sampled and calculated every 10 seconds) of failed DNS query in the current GP. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsPerBladeStatisticsGroup |
(1) The value might be inaccurate when the traffic is not stable or the
total traffic is extremely low.
3.8.4 ipworksDnsServTransactionPerSecond
The default PM job, which is a threshold job, for this measurement is DnsTPSDefaultJob. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DnsTPSDefaultJob
The default PM job with the default value is as follows:
PmJob=DnsTPSDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=ONE_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=THRESHOLDJOB
pmJobId="DnsTPSDefaultJob"
reportingPeriod=ONE_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=mr_1
measurementReaderId="mr_1"
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef=[] <empty>
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,
Pm=1,PmGroup=DnsPerBladeStatisticsGroup,
MeasurementType=ipworksDnsServTransactionPerSecond"
PmThresholdMonitoring=Thres-TPS-MAJOR
pmThresholdMonitoringId="Thres-TPS-MAJOR"
thresholdHigh=90000
thresholdLow=89000
thresholdSeverity=MAJOR
PmThresholdMonitoring=Thres-TPS-MINOR
pmThresholdMonitoringId="Thres-TPS-MINOR"
thresholdHigh=80000
thresholdLow=79000
thresholdSeverity=MINOR <default>
|
|
Attribute |
Value |
|---|---|
|
Description |
The average number of DNS query received by the DNS server in every second in the current GP. |
|
Condition |
The average value of DNS query received by the DNS server every second in the current GP. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DnsPerBladeStatisticsGroup |
4 Measurements for ENUM
This section provides the performance measurement data regarding ENUM. In addition, the default PM job is described for each performance measurement group.
4.1 EnumServerIdentityGroup
This performance measurement group, called EnumServerIdentityGroup, contains a counter for event which is related to ENUM server running. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumServerIdentityGroup
The default PM job, which is a measurement collection job, is ENUMQueryDefaultJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=ENUMQueryDefaultJob.
The default job with the default value is as follows:
PmJob=ENUMQueryDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="ENUMQueryDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=mr_1
MeasurementReader=mr_2
(Pm=1)>show all PmJob=ENUMQueryDefaultJob
PmJob=ENUMQueryDefaultJob
currentJobState=ACTIVE
MeasurementReader=mr_1
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumMessageGroup"
MeasurementReader=mr_2
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumServerIdentityGroup"
|
This performance measurement group includes following measurement:
4.1.1 ipworksEnumProcessUpTime
|
Attribute |
Value |
|---|---|
|
Description |
The number of seconds since the server was started. |
|
Condition |
The value is incremented for every second when the ENUM server is running. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
EnumServerIdentityGroup |
4.2 EnumMessageGroup
This performance measurement group, called EnumMessageGroup, contains measurements for events which are related to ENUM queries. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumMessageGroup
The default PM job, which is a measurement collection job, is ENUMQueryDefaultJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=ENUMQueryDefaultJob.
The default job with the default value is as follows:
PmJob=ENUMQueryDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="ENUMQueryDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=mr_1
MeasurementReader=mr_2
(Pm=1)>show all PmJob=ENUMQueryDefaultJob
PmJob=ENUMQueryDefaultJob
currentJobState=ACTIVE
MeasurementReader=mr_1
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumMessageGroup"
MeasurementReader=mr_2
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumServerIdentityGroup"
|
This performance measurement group includes following measurements:
- ipworksEnumCounterSuccessfulRequests
- ipworksEnumCounterInvalidFormat
- ipworksEnumCounterServerFailed
- ipworksEnumCounterNameError
- ipworksEnumCounterNotImplemented
- ipworksEnumCounterRefused
- ipworksEnumCounterSingleDN
- ipworksEnumCounterInsufficientDigits
- ipworksEnumCounterNoDn
- ipworksEnumCounterRequestErrors
- ipworksEnumCounterTruncatedResponses
- ipworksEnumCounterForwardedRequests
- ipworksEnumCounterRequestsFailed
- ipworksEnumCounterDBFailed
- ipworksEnumCounterDBSearch
- ipworksEnumCounterTotalFailed
- ipworksEnumCounterTotalRequest
- ipworksEnumCounterRCSeOtherOPRequests
- LDAPRequestForDNSCHED
- LDAPResponseForDNSCHED
- TargetHitIncacheForDNSCHED
- SOAPRequestReceivedForDNSCHED
- SOAPRequestReceivedForDNRANGE
- ENUMDNSCHEDCachedNumber
- ENUMDNRANGECachedNumber
4.2.1 ipworksEnumCounterSuccessfulRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of successful queries and status requests made to the ENUM server. A successful query is defined as an ENUM request in a zone, for which the server is authoritative, which results in a NOERROR response. |
|
Condition |
The value is incremented for every ENUM request received that results in a success. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.2 ipworksEnumCounterInvalidFormat
|
Attribute |
Value |
|---|---|
|
Description |
The number of queries made to the ENUM server that have an invalid DNS format within the DNS header or QNAME field of the question section. |
|
Condition |
The value is incremented for every ENUM request received that is in invalid format. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.3 ipworksEnumCounterServerFailed
|
Attribute |
Value |
|---|---|
|
Description |
The number of queries made to the ENUM server, for which the server is authoritative, while the NDB database cluster is temporarily unavailable. These queries result in a SERVFAIL response. |
|
Condition |
The value is incremented for every ENUM request received results in a SERVFAIL response. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.4 ipworksEnumCounterNameError
|
Attribute |
Value |
|---|---|
|
Description |
The number of unsuccessful queries made to the ENUM server. An unsuccessful query is defined as an ENUM request in a zone for which the server is authoritative, but where no DN or DNRANGE exists. |
|
Condition |
The value is incremented for every ENUM request that results in ‘a Name Error’ response. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.5 ipworksEnumCounterNotImplemented
|
Attribute |
Value |
|---|---|
|
Description |
The number of ENUM requests made to the ENUM Server which resulted in ‘Not Implemented’ response. |
|
Condition |
The value is incremented for every ENUM request received that results in a ‘Not Implemented’ response. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.6 ipworksEnumCounterRefused
|
Attribute |
Value |
|---|---|
|
Description |
The number of ENUM queries received which resulted in refusal. |
|
Condition |
The value is incremented for every ENUM request received that results in a ‘refusal’ response. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.7 ipworksEnumCounterSingleDN
|
Attribute |
Value |
|---|---|
|
Description |
The number of ENUM requests that encounter an entry in the ENUMDNSCHED Table. |
|
Condition |
The value is incremented for every ENUM query made to a single DN. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.8 ipworksEnumCounterInsufficientDigits
|
Attribute |
Value |
|---|---|
|
Description |
The number of ENUM requests that encounter an ambiguous result from the ENUMDNRANGE Decode Tree due to insufficient digits. |
|
Condition |
The value is incremented on receipt of an ENUM request with Insufficient Digits. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.9 ipworksEnumCounterNoDn
|
Attribute |
Value |
|---|---|
|
Description |
The number of ENUM requests whose DDS does not encounter an entry in either the ENUMDNRANGE or ENUMDNSCHED Tables. |
|
Condition |
The value is incremented for every ENUM request received that results in a NoDn response. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.10 ipworksEnumCounterRequestErrors
|
Attribute |
Value |
|---|---|
|
Description |
The number of ENUM requests which resulted in errors while processing the request. |
|
Condition |
The value is incremented for every ENUM request received that resulted in errors. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.11 ipworksEnumCounterTruncatedResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of ENUM requests which resulted in truncated responses. |
|
Condition |
The value is incremented for every ENUM request received that results in a truncated response. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.12 ipworksEnumCounterForwardedRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of ENUM requests that have been forwarded to a resolver due to the results of a destnode. |
|
Condition |
The value is incremented for every ENUM request that has been forwarded to a resolver due to the results of a destnode. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.13 ipworksEnumCounterRequestsFailed
|
Attribute |
Value |
|---|---|
|
Description |
The number of ENUM requests that have resulted in error responses irrespective of error type. |
|
Condition |
The value is incremented for every ENUM request received that results in a failure. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.14 ipworksEnumCounterDBFailed
|
Attribute |
Value |
|---|---|
|
Description |
Number of total failed requests caused by NDB malfunctioning except Cluster Down, including: 1) unable to generate and construct the search condition of the transaction; 2) unable to do the lock operation; 3) the result of the executing transaction is unsuccessful. |
|
Condition |
The value is incremented for every received ENUM request that resulted in a failure caused by NDB malfunctioning except Cluster Down. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.15 ipworksEnumCounterDBSearch
|
Attribute |
Value |
|---|---|
|
Description |
Number of total requests that ENUM sends to do the DB search. |
|
Condition |
The value is incremented when every ENUM sends the query to NDB cluster. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.16 ipworksEnumCounterTotalFailed
|
Attribute |
Value |
|---|---|
|
Description |
The number of total query failures of ENUM, ERH and DNS. This measurement will be used to determine whether the ENUM, Total Query Failure Error alarm needs to be raised. |
|
Condition |
The value is incremented for every received ENUM request that resulted in a failure. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.17 ipworksEnumCounterTotalRequest
|
Attribute |
Value |
|---|---|
|
Description |
The number of total ENUM, ERH and DNS request, ENUM server has received. |
|
Condition |
The value is incremented for every received ENUM request. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.18 ipworksEnumCounterRCSeOtherOPRequests
|
Attribute |
Value |
|---|---|
|
Description |
The total number of ENUM, ERH, and DNS requests that the ENUM server receives from external operator nodes. |
|
Condition |
The value is incremented as soon as the ENUM server receives an ENUM, ERH, or DNS request from external operator nodes. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.19 LDAPRequestForDNSCHED
|
Attribute |
Value |
|---|---|
|
Description |
The number of total LDAP requests for DNSCHED that ENUM server has sent. |
|
Condition |
The value is incremented for every ENUM LDAP request sending for DNSCHED. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.20 LDAPResponseForDNSCHED
|
Attribute |
Value |
|---|---|
|
Description |
The number of total LDAP responses for DNSCHED that ENUM server has received. |
|
Condition |
The value is incremented for every ENUM LDAP response receiving for DNSCHED. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.21 TargetHitIncacheForDNSCHED
|
Attribute |
Value |
|---|---|
|
Description |
The number of total target hits in cache for DNSCHED that ENUM server has received. |
|
Condition |
The value is incremented for every target hit ENUM request receiving in DNSCHED cache. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.22 SOAPRequestReceivedForDNSCHED
|
Attribute |
Value |
|---|---|
|
Description |
The number of total SOAP requests received for DNSCHED that ENUM server has received. |
|
Condition |
The value is incremented for every ENUM SOAP request received for DNSCHED. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.23 SOAPRequestReceivedForDNRANGE
|
Attribute |
Value |
|---|---|
|
Description |
The number of total SOAP requests received for DNRANGE that ENUM server has received. |
|
Condition |
The value is incremented for every ENUM SOAP request received for DNRANGE. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.24 ENUMDNSCHEDCachedNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of total ENUM DNSCHED cached. |
|
Condition |
The value is incremented for every ENUM DNSCHED cached. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.2.25 ENUMDNRANGECachedNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of total ENUM DNRANGE cached. |
|
Condition |
The value is incremented for every ENUM DNRANGE cached. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
EnumMessageGroup |
4.3 EnumTPSAlarmGroup
This performance measurement group, called EnumTPSAlarmGroup, contains measurements for events which are related to ENUM TPS alarms. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumTPSAlarmGroup
The default PM job, which is a threshold monitoring job, is ENUMTPSDefaultJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=ENUMTPSDefaultJob.
The default job with the default value is as follows:
(Pm=1)>show -v PmJob=ENUMTPSDefaultJob
PmJob=ENUMTPSDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=ONE_MIN
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=THRESHOLDJOB
pmJobId="ENUMTPSDefaultJob"
reportingPeriod=ONE_MIN
requestedJobState=ACTIVE <default>
MeasurementReader=mr_1
MeasurementReader=mr_2
(Pm=1)>
(Pm=1)>show all PmJob=ENUMTPSDefaultJob
PmJob=ENUMTPSDefaultJob
currentJobState=ACTIVE
granularityPeriod=ONE_MIN
jobType=THRESHOLDJOB
reportingPeriod=ONE_MIN
MeasurementReader=mr_1
measurementSpecification
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumTPSAlarmGroup,MeasurementType=ipworksEnumQueryFailureErrorRate"
PmThresholdMonitoring=Thres-QueryFailureError-Warning
thresholdHigh=30
thresholdLow=25
thresholdSeverity=WARNING
MeasurementReader=mr_2
measurementSpecification
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumTPSAlarmGroup,MeasurementType=ipworksEnumTotalQueryFailureErrorRate"
PmThresholdMonitoring=Thres-TotalQueryFailureError-Warning
thresholdHigh=30
thresholdLow=25
thresholdSeverity=WARNING
|
This performance measurement group includes following measurements:
4.3.1 ipworksEnumQueryFailureErrorRate
The measurement result determines whether the alarm ENUM, Query Failure Error is issued.
|
Attribute |
Value |
|---|---|
|
Description |
The failure rate of failed ENUM query. |
|
Condition |
The average value of the failure rates (which are sampled and calculated every 10 seconds) of failed ENUM query in the current GP. In IPWorks, the following cases are counted as ENUM query failure:
|
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
EnumTPSAlarmGroup |
4.3.2 ipworksEnumTotalQueryFailureErrorRate
The measurement result determines whether the alarm ENUM, Total Query Failure Error is issued.
|
Attribute |
Value |
|---|---|
|
Description |
The failure rate of total failed ENUM query (including DNS, ENUM, and ERH query failures). |
|
Condition |
The average value of the failure rates (which are sampled and calculated every 10 seconds) of failed ENUM query in the current GP. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
EnumTPSAlarmGroup |
4.4 EnumPerBladeStatisticsGroup
This performance measurement group, called EnumPerBladeStatisticsGroup, contains measurements for events which are related to ENUM in node level. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumPerBladeStatisticsGroup
The default PM job is ENUMServTPSDefaultJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=ENUMServTPSDefaultJob
The default job with the default value is as follows:
(Pm=1)>show -v PmJob=ENUMServTPSDefaultJob
PmJob=ENUMServTPSDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="ENUMServTPSDefaultJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=mr_1
(Pm=1)>show all PmJob=ENUMServTPSDefaultJob
PmJob=ENUMServTPSDefaultJob
currentJobState=ACTIVE
MeasurementReader=mr_1
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=EnumPerBladeStatisticsGroup"
(Pm=1)>
|
This performance measurement group includes following measurement:
4.4.1 ipworksEnumServTransactionPerSecond
|
Attribute |
Value |
|---|---|
|
Description |
The average number of ENUM query received by the ENUM server in every second in the current GP. |
|
Condition |
The average value of ENUM query received by the ENUM server every second in the current GP. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
EnumPerBladeStatisticsGroup |
5 Measurements for ERH
This section provides the performance measurement data regarding ERH. In addition, the default PM job is described for each performance measurement group.
5.1 ERHGroup
This performance measurement group, called ERHGroup, contains a measurement for events which are related to ERH query. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=ERHGroup
The default PM job, which is a measurement collection job, is ERHQueryDefaultJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=ERHQueryDefaultJob.
The default job with the default value is as follows:
PmJob=ERHQueryDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=ONE_MIN
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="ERHQueryDefaultJob"
reportingPeriod=ONE_MIN
requestedJobState=ACTIVE <default>
MeasurementReader=mr_1
(Pm=1)>show all PmJob=ERHQueryDefaultJob
PmJob=ERHQueryDefaultJob
currentJobState=ACTIVE
granularityPeriod=ONE_MIN
reportingPeriod=ONE_MIN
MeasurementReader=mr_1
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=ERHGroup"
|
This performance measurement group includes following measurements:
- ERHLNPQ
- ERHFailedLNPQ
- ERHLNPQWithNPDI
- ERHTollFreeQ
- ERHFailedTollFreeQ
- ERHTollFreeQWithCic
- ERHNPQusingINAP
- ERHNPfailedQusingINAP
- ERHNPQusingINAPwithPorted
- ERHNPQusingMAP
- ERHNPfailedQusingMAP
- ERHNPQusingMAPwithPorted
- ERHTotalQuery
- ERHTotalFailedQuery
- ERHNPQusingLDAP
- ERHNPfailedQusingLDAP
- ERHTollFreeQWithGEO
- ERHTollFreeQWithGEOandCic
- ERHNPQusingLDAPwithPorted
5.1.1 ERHLNPQ
|
Attribute |
Value |
|---|---|
|
Description |
The total number of LNP queries. |
|
Condition |
The value is incremented for every LNP query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.2 ERHFailedLNPQ
|
Attribute |
Value |
|---|---|
|
Description |
The number of all kinds of failed LNP queries. |
|
Condition |
The value is incremented for every failure of a LNP query (failed to send ERH or received by ERH which error code). |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.3 ERHLNPQWithNPDI
|
Attribute |
Value |
|---|---|
|
Description |
The total number of LNP queries that resulted in number ported indication. |
|
Condition |
The value is incremented for every successful LNP query sent by ERH and received by ENUM with routing number. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.4 ERHTollFreeQ
|
Attribute |
Value |
|---|---|
|
Description |
The total number of the toll-free queries. |
|
Condition |
The value is incremented for every TOLLFREE query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.5 ERHFailedTollFreeQ
|
Attribute |
Value |
|---|---|
|
Description |
The total number of failed toll-free queries. |
|
Condition |
The value is incremented for every failure of a TOLLFREE query (failed to send ERH or received by ERH which error code). |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.6 ERHTollFreeQWithCic
|
Attribute |
Value |
|---|---|
|
Description |
The total number of toll-free queries that got a cic as answer. |
|
Condition |
The value is incremented for every successful query that got a cic as answer, sent by ERH and received by ENUM with routing number. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.7 ERHNPQusingINAP
|
Attribute |
Value |
|---|---|
|
Description |
The total number of INAP queries. |
|
Condition |
The value is incremented for every INAP query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.8 ERHNPfailedQusingINAP
|
Attribute |
Value |
|---|---|
|
Description |
The total number of failed INAP queries. |
|
Condition |
The value is incremented for every failure of an INAP query (failed to send ERH or received by ERH which error code). |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.9 ERHNPQusingINAPwithPorted
|
Attribute |
Value |
|---|---|
|
Description |
The total number of toll-free queries that got a called party ID and cic as answer. |
|
Condition |
The value is incremented for every successful query that got a called party ID and cic as answer, sent by ERH and received by ENUM with routing number. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.10 ERHNPQusingMAP
|
Attribute |
Value |
|---|---|
|
Description |
The total number of MAP queries. |
|
Condition |
The value is incremented for every MAP query. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.11 ERHNPfailedQusingMAP
|
Attribute |
Value |
|---|---|
|
Description |
The total number of failed MAP queries. |
|
Condition |
The value is incremented for every failure of a MAP query (failed to send ERH or received by ERH which error code). |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.12 ERHNPQusingMAPwithPorted
|
Attribute |
Value |
|---|---|
|
Description |
The total number of MAP queries that resulted in number ported indication. |
|
Condition |
The value is incremented for every successful MAP query sent by ERH and received by ENUM with routing number. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.13 ERHTotalQuery
|
Attribute |
Value |
|---|---|
|
Description |
|
|
Condition |
|
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.14 ERHTotalFailedQuery
|
Attribute |
Value |
|---|---|
|
Description |
The total number of NP queries that either ERH fails to send or ERH fails to get a correct response according to. |
|
Condition |
The value is incremented as long as either ERH fails to send an NP query or ERH receives a response with error code. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.15 ERHNPQusingLDAP
|
Attribute |
Value |
|---|---|
|
Description |
|
|
Condition |
The value is incremented for every query via LDAP protocol. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.16 ERHNPfailedQusingLDAP
|
Attribute |
Value |
|---|---|
|
Description |
The number of NP queries using LDAP that failed to get a response from the external npdb. |
|
Condition |
The value is incremented for every failure of a query via LDAP (Failed to send to CUDB or the return code from CUDB is 51,52,53 or 80). |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.17 ERHTollFreeQWithGEO
|
Attribute |
Value |
|---|---|
|
Description |
Total number of toll-free queries that got an geographic number. |
|
Condition |
The value is incremented for every successful query that got an geographic number as answer, sent by ERH and received by ENUM with routing number. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.18 ERHTollFreeQWithGEOandCic
|
Attribute |
Value |
|---|---|
|
Description |
Total number of toll-free queries that got cic and geographic number. |
|
Condition |
The value is incremented for every successful query that got cic and geographic number as answer, sent by ERH and received by ENUM with routing number. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.1.19 ERHNPQusingLDAPwithPorted
|
Attribute |
Value |
|---|---|
|
Description |
The number of NP queries using LDAP that got a reply indicating that the number was ported. |
|
Condition |
The value is incremented for every successful query sent to LDAP and received by ENUM with routing number. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
ERHGroup |
5.2 ERHTPSAlarmGroup
This performance measurement group, called ERHTPSAlarmGroup, contains a measurement for events which are related to ERH TPS alarm. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=ERHTPSAlarmGroup
The default PM job, which is a threshold monitoring job, is ERHTPSDefaultJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=ERHTPSDefaultJob.
The default job with the default value is as follows:
(Pm=1)>show -v PmJob=ERHTPSDefaultJob
PmJob=ERHTPSDefaultJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=THRESHOLDJOB
pmJobId="ERHTPSDefaultJob"
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=mr_1
MeasurementReader=mr_2
MeasurementReader=mr_3
MeasurementReader=mr_4
(Pm=1)>show all PmJob=ERHTPSDefaultJob
PmJob=ERHTPSDefaultJob
currentJobState=ACTIVE
jobType=THRESHOLDJOB
MeasurementReader=mr_1
measurementSpecification
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=ERHTPSAlarmGroup,MeasurementType=ERHTransactionPerSecond"
PmThresholdMonitoring=Thres-TransPerSecond-MAJOR
thresholdHigh=8000
thresholdLow=7900
thresholdSeverity=MAJOR
PmThresholdMonitoring=Thres-TransPerSecond-MINOR
thresholdHigh=7200
thresholdLow=7100
PmThresholdMonitoring=Thres-TransPerSecond-WARNING
thresholdHigh=6400
thresholdLow=6300
thresholdSeverity=WARNING
MeasurementReader=mr_2
measurementSpecification
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=ERHTPSAlarmGroup,MeasurementType=FailedNPThreshold"
PmThresholdMonitoring=Thres-FailedNPQuery-WARING
thresholdHigh=5
thresholdLow=4
thresholdSeverity=WARNING
MeasurementReader=mr_3
measurementSpecification
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=ERHTPSAlarmGroup,MeasurementType=FailedTollFreeThreshold"
PmThresholdMonitoring=Thres-FailedTollFreeQuery-WARING
thresholdHigh=5
thresholdLow=4
thresholdSeverity=WARNING
MeasurementReader=mr_4
measurementSpecification
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=ERHTPSAlarmGroup,MeasurementType=FailedERHQueryThreshold"
PmThresholdMonitoring=Thres-FailedErhQuery-WARING
thresholdHigh=5
thresholdLow=4
thresholdSeverity=WARNING
|
This performance measurement group includes following measurements:
5.2.1 ERHTransactionPerSecond
The measurement result determines whether the alarm ERH, TPS Exceed Threshold is issued.
|
Attribute |
Value |
|---|---|
|
Description |
The average number of ERH query received by the ENUM server in every second. |
|
Condition |
The average number of ERH query received by the ENUM server every second in the current GP. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
ERHTPSAlarmGroup |
5.2.2 FailedNPThreshold
The measurement result determines whether the alarm ERH, NP Query Error is issued.
|
Attribute |
Value |
|---|---|
|
Description |
The failure rate of failed NP query. |
|
Condition |
The average value of the failure rates (which are sampled and calculated every 10 seconds) of failed NP query in the current GP. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
ERHTPSAlarmGroup |
5.2.3 FailedTollFreeThreshold
The measurement result determines whether the alarm ERH, Toll-free Query Error is issued.
|
Attribute |
Value |
|---|---|
|
Description |
The failure rate of failed Toll-free query. |
|
Condition |
The average value of the failure rates (which are sampled and calculated every 10 seconds) of failed Toll-free query in the current GP. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
ERHTPSAlarmGroup |
5.2.4 FailedERHQueryThreshold
The measurement result determines whether the alarm ERH, Total Query Error is issued.
|
Attribute |
Value |
|---|---|
|
Description |
The failure rate of failed query (including NP and Toll-free query). |
|
Condition |
The average value of the failure rates (which are sampled and calculated every 10 seconds) of failed query in the current GP. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
ERHTPSAlarmGroup |
6 Measuerments for Element Manager
This section describes the performance measurement data regarding Element Manager. In addition, the default PM job is described for each performance measurement group.
6.1 SsGroup
This performance measurement group, called SsGroup, contains measurements for events related to the Element Manager. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=SsGroup
The default measurement collection job for this performance measurement group is ssdefaultjob. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=ssdefaultjob
The default PM job with the default value is as follows:
(PmJob=ssdefaultjob)>show -v all
PmJob=ssdefaultjob
compressionType=[] <empty>
currentJobState=STOPPED <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="ssdefaultjob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=STOPPED
MeasurementReader=mr_1
measurementReaderId="mr_1"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=6-2,SystemFunctions=1,Pm=1,PmGroup=SsGroup"
measurementTypeRef=[] <empty>
|
This performance measurement group includes following measurements:
6.1.1 SsEnumDnRangeNumberGauge
|
Attribute |
Value |
|---|---|
|
Description |
The total number of EnumDnRange for the ENUM server. |
|
Condition |
The value is changed once an EnumDnRange is created or deleted. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
SsGroup |
6.1.2 SsEnumDnSchedNumberGauge
|
Attribute |
Value |
|---|---|
|
Description |
The total number of EnumDnSched for the ENUM server. |
|
Condition |
The value is changed once an EnumDnSched is created or deleted. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
SsGroup |
7 Measurements for Radius AAA
This section provides the performance measurement data regarding Radius AAA.
For all the performance measurement groups of Radius AAA, the default PM job is AAARadiusDefaultPmJob. The default PM job is a measurement collection job. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=AAARadiusDefaultPmJob.
The default job with the default value is as follows:
(PmJob=AAARadiusDefaultPmJob)>show -v all
PmJob=AAARadiusDefaultPmJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="AAARadiusDefaultPmJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=AAARadiusOtherMr
measurementReaderId="AAARadiusOtherMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAARadiusOtherGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAARadiusAuthMr
measurementReaderId="AAARadiusAuthMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAARadiusAuthGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAARadiusAuthProxyMr
measurementReaderId="AAARadiusAuthProxyMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAARadiusAuthProxyGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAARadiusDynamicAuthzProxyMr
measurementReaderId="AAARadiusDynamicAuthzProxyMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAARadiusDynAuthzProxyGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAARadiusAccProxyMr
measurementReaderId="AAARadiusAccProxyMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAARadiusAccProxyGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAARadiusAccMr
measurementReaderId="AAARadiusAccMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAARadiusAccGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAARadiusDynamicAuthzMr
measurementReaderId="AAARadiusDynamicAuthzMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAARadiusDynAuthzGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAARadiusFrontEndMr
measurementReaderId="AAARadiusFrontEndMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAARadiusFrontEndGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAARadiusIPallocMr
measurementReaderId="AAARadiusIPallocMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAARadiusIPallocGroup"
measurementTypeRef=[] <empty>
(PmJob=AAARadiusDefaultPmJob)>
|
7.1 AAARadiusAuthGroup
This performance measurement group, called AAARadiusAuthGroup, contains the measurements of events which are related to Radius authentication.
>ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAARadiusAuthGroup
This performance measurement group includes following measurements:
- ipworksRadiusAuthServTotalAccessRequests
- ipworksRadiusAuthServTotalInvalidRequests
- ipworksRadiusAuthServTotalDupAccessRequests
- ipworksRadiusAuthServTotalAccessAccepts
- ipworksRadiusAuthServTotalAccessRejects
- ipworksRadiusAuthServTotalAccessChallenges
- ipworksRadiusAuthServTotalMalformedAccessRequests
- ipworksRadiusAuthServTotalBadAuthenticators
- ipworksRadiusAuthServTotalPacketsDropped
- ipworksRadiusAuthServTotalUnknownTypes
7.1.1 ipworksRadiusAuthServTotalAccessRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of packets received on the authentication port in the current GP. |
|
Condition |
Incremented for every successful receiving of packets on the authentication port. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthGroup |
7.1.2 ipworksRadiusAuthServTotalInvalidRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Request packets received from unknown addresses in the current GP. |
|
Condition |
Incremented for every receiving of packets from unknown addresses. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthGroup |
7.1.3 ipworksRadiusAuthServTotalDupAccessRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of duplicate RADIUS Access-Request packets received in the current GP. |
|
Condition |
Incremented for every receiving of duplicate Access-Requests. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthGroup |
7.1.4 ipworksRadiusAuthServTotalAccessAccepts
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Accept packets sent in the current GP. |
|
Condition |
Incremented for every successful sending of Accss-Accepts. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthGroup |
7.1.5 ipworksRadiusAuthServTotalAccessRejects
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Reject packets sent in the current GP. |
|
Condition |
Incremented for every successful sending of Access-Rejects. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthGroup |
7.1.6 ipworksRadiusAuthServTotalAccessChallenges
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Challenge packets sent in the current GP. |
|
Condition |
Incremented for every successful sending of Access-Challenges. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthGroup |
7.1.7 ipworksRadiusAuthServTotalMalformedAccessRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of malformed RADIUS Access-Request packets received. Bad authenticators and unknown types are not included as malformed Access-Requests in the current GP. |
|
Condition |
Incremented for every receiving of malformed Access-Requests excluding packets with bad authenticators or of unknown types. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthGroup |
7.1.8 ipworksRadiusAuthServTotalBadAuthenticators
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Authentication-Request packets that contain invalid Message Authenticator attributes received in the current GP. |
|
Condition |
Incremented for every receiving of Authentication-Request packets with invalid Message Authenticator. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthGroup |
7.1.9 ipworksRadiusAuthServTotalPacketsDropped
|
Attribute |
Value |
|---|---|
|
Description |
The number of incoming packets silently discarded for some reason other than malformed, bad authenticators or unknown types in the current GP. |
|
Condition |
Incremented for every receiving of packets excluded those of malformation, with bad authenticators or of unknown types. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthGroup |
7.1.10 ipworksRadiusAuthServTotalUnknownTypes
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS packets of unknown type that were received in the current GP. |
|
Condition |
Incremented for every receiving of packets of unknown type. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthGroup |
7.2 AAARadiusAuthProxyGroup
This performance measurement group, called AAARadiusAuthProxyGroup, contains the measurements of events which are related to Radius proxy authentication.
>ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAARadiusAuthProxyGroup
This performance measurement group includes following measurements:
- ipworksRadiusAuthClientInvalidServerAddresses
- ipworksRadiusAuthClientTotalAccessRequests
- ipworksRadiusAuthClientTotalAccessRetransmissions
- ipworksRadiusAuthClientTotalAccessAccepts
- ipworksRadiusAuthClientTotalAccessRejects
- ipworksRadiusAuthClientTotalAccessChallenges
- ipworksRadiusAuthClientTotalMalformedAccessResponses
- ipworksRadiusAuthClientTotalBadAuthenticators
- ipworksRadiusAuthClientTotalPendingRequests
- ipworksRadiusAuthClientTotalTimeouts
- ipworksRadiusAuthClientTotalUnknownTypes
- ipworksRadiusAuthClientTotalPacketsDropped
7.2.1 ipworksRadiusAuthClientInvalidServerAddresses
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Response packets received from unknown addresses in the current GP. |
|
Condition |
Incremented for every receiving of Access-Responses from unknown addresses. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.2 ipworksRadiusAuthClientTotalAccessRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Request packets sent to server. This does not include retransmissions in the current GP. |
|
Condition |
Incremented for every sending of Access-Requests excluding retransmissions. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.3 ipworksRadiusAuthClientTotalAccessRetransmissions
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Request packets retransmitted to RADIUS authentication server in the current GP. |
|
Condition |
Incremented for every retransmitting of Access-Requests. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.4 ipworksRadiusAuthClientTotalAccessAccepts
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Accept packets (valid or invalid) received from server in the current GP. |
|
Condition |
Incremented for every receiving of Access-Accepts. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.5 ipworksRadiusAuthClientTotalAccessRejects
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Reject packets (valid or invalid) received from server in the current GP. |
|
Condition |
Incremented for every receiving of Access-Rejects. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.6 ipworksRadiusAuthClientTotalAccessChallenges
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Challenge packets(valid or invalid)received from server in the current GP. |
|
Condition |
Incremented for every successful receiving of Access-Challenges. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.7 ipworksRadiusAuthClientTotalMalformedAccessResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of malformed RADIUS Access-Response packets received from server. Malformed packets include packets with an invalid length. Bad authenticators or Message Authenticator attributes or unknown types are not included as malformed access responses in the current GP. |
|
Condition |
Incremented for every receiving of malformed Access-Responses excluding packets with bad authenticators, with message authenticator attributes or of unknown types. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.8 ipworksRadiusAuthClientTotalBadAuthenticators
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Response packets containing invalid authenticators or Message Authenticator attributes received from server in the current GP. |
|
Condition |
Incremented for every receiving of Access-Response with invalid authenticators or message authenticator attributes. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.9 ipworksRadiusAuthClientTotalPendingRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Access-Request packets destined for the server that have not yet timed out or received a response. |
|
Condition |
Incremented when an Access-Request is sent and decremented due to timeout, retransmission, or receipt of an Access-Accept, Access-Reject,and Access-Challenge. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.10 ipworksRadiusAuthClientTotalTimeouts
|
Attribute |
Value |
|---|---|
|
Description |
The number of authentication timeouts to server in the current GP. |
|
Condition |
Incremented for every authentication timeout. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.11 ipworksRadiusAuthClientTotalUnknownTypes
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS packets of unknown type that were received from the server on the authentication port in the current GP. |
|
Condition |
Incremented for every receiving of packets of unknown type. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.2.12 ipworksRadiusAuthClientTotalPacketsDropped
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS packets that were received from the server on the authentication port and dropped for some other reason in the current GP. |
|
Condition |
Incremented for every received but dropped packets. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAuthProxyGroup |
7.3 AAARadiusAccGroup
This performance measurement group, called AAARadiusAccGroup, contains the measurements of events which are related to Radius accounting for AAA.
>ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAARadiusAccGroup
This performance measurement group includes following measurements:
- ipworksRadiusAccServTotalRequests
- ipworksRadiusAccServTotalInvalidRequests
- ipworksRadiusAccServTotalDupRequests
- ipworksRadiusAccServTotalResponses
- ipworksRadiusAccServTotalMalformedRequests
- ipworksRadiusAccServTotalBadAuthenticators
- ipworksRadiusAccServTotalPacketsDropped
- ipworksRadiusAccServTotalNoRecords
- ipworksRadiusAccServTotalUnknownTypes
7.3.1 ipworksRadiusAccServTotalRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of packets received on the accounting port in the current GP. |
|
Condition |
Incremented for every successful receiving of packets on accounting port. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccGroup |
7.3.2 ipworksRadiusAccServTotalInvalidRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Accounting-Request packets received from unknown addresses in the current GP. |
|
Condition |
Incremented for every receiving of Accounting-Requests from unknown addresses. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccGroup |
7.3.3 ipworksRadiusAccServTotalDupRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of duplicate RADIUS Accounting-Request packets received in the current GP. |
|
Condition |
Incremented for every receiving of duplicate Accounting-Requests. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccGroup |
7.3.4 ipworksRadiusAccServTotalResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Accounting-Response packets sent in the current GP. |
|
Condition |
Incremented for every successful sending of Accounting-Responses. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccGroup |
7.3.5 ipworksRadiusAccServTotalMalformedRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of malformed RADIUS Accounting-Request packets received. Bad authenticators or unknown types are not included as malformed Access-Requests in the current GP. |
|
Condition |
Incremented for every receiving of malformed Accounting-Requests excluding packets with bad authenticators or of unknown types. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccGroup |
7.3.6 ipworksRadiusAccServTotalBadAuthenticators
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Accounting-Request packets that contains an invalid authenticator in the current GP. |
|
Condition |
Incremented for every receiving of Accounting-Requests with invalid authenticators. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccGroup |
7.3.7 ipworksRadiusAccServTotalPacketsDropped
|
Attribute |
Value |
|---|---|
|
Description |
The number of incoming packets silently discarded for a reason other than malformed, bad authenticators, or unknown types in the current GP. |
|
Condition |
Incremented for every receiving of packets excluding those of malformation, with bad authenticators or of unknown types. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccGroup |
7.3.8 ipworksRadiusAccServTotalNoRecords
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Accounting-Request packets that were received and responded to but not recorded in the current GP. |
|
Condition |
Incremented for every not recorded Accounting-Requests. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccGroup |
7.3.9 ipworksRadiusAccServTotalUnknownTypes
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS packets of unknown type that were received in the current GP. |
|
Condition |
Incremented for every receiving of packets of unknown type. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccGroup |
7.4 AAARadiusAccProxyGroup
This performance measurement group, called AAARadiusAccProxyGroup, contains the measurements of events which are related to Radius accounting proxy for AAA.
>ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAARadiusAccProxyGroup
This performance measurement group includes following measurements:
- ipworksRadiusAccClientInvalidServerAddresses
- ipworksRadiusAccClientTotalRequests
- ipworksRadiusAccClientTotalRetransmissions
- ipworksRadiusAccClientTotalResponses
- ipworksRadiusAccClientTotalMalformedResponses
- ipworksRadiusAccClientTotalBadAuthenticators
- ipworksRadiusAccClientTotalPendingRequests
- ipworksRadiusAccClientTotalTimeouts
- ipworksRadiusAccClientTotalUnknownTypes
- ipworksRadiusAccClientTotalPacketsDropped
7.4.1 ipworksRadiusAccClientInvalidServerAddresses
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Accounting-Response packets received from unknown addresses in the current GP. |
|
Condition |
Incremented for every receiving of Accounting-Responses from unknown addresses. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccProxyGroup |
7.4.2 ipworksRadiusAccClientTotalRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Accounting-Request packets sent. This does not include retransmissions in the current GP. |
|
Condition |
Incremented for every sending of Accounting-Requests excluding retransmissions. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccProxyGroup |
7.4.3 ipworksRadiusAccClientTotalRetransmissions
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Accounting-Request packets retransmitted to the RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same in the current GP. |
|
Condition |
Incremented for every retransmissions of Accounting-Requests. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccProxyGroup |
7.4.4 ipworksRadiusAccClientTotalResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS packets received on the accounting port from the server in the current GP. |
|
Condition |
Incremented for every successful receiving of packets on the accounting port. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccProxyGroup |
7.4.5 ipworksRadiusAccClientTotalMalformedResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of malformed RADIUS Accounting-Response packets received from the server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses in the current GP. |
|
Condition |
Incremented for every receiving of malformed Accounting Responses. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccProxyGroup |
7.4.6 ipworksRadiusAccClientTotalBadAuthenticators
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Accounting-Response packets that contained invalid authenticators received from the server in the current GP. |
|
Condition |
Incremented for every receiving of Accounting-Responses with invalid authenticators. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccProxyGroup |
7.4.7 ipworksRadiusAccClientTotalPendingRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS Accounting-Request packets sent to the server that have not yet timed out or received a response. |
|
Condition |
Incremented when an Accounting-Request is sent and decremented due to a timeout, a retransmission or receipt of an Accounting-Response. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccProxyGroup |
7.4.8 ipworksRadiusAccClientTotalTimeouts
|
Attribute |
Value |
|---|---|
|
Description |
The number of accounting timeouts to the server in the current GP. |
|
Condition |
Incremented for every accounting timeout. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccProxyGroup |
7.4.9 ipworksRadiusAccClientTotalUnknownTypes
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS packets of unknown type that were received from the server on the accounting port in the current GP. |
|
Condition |
Incremented for every receiving of packets of unknown type. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccProxyGroup |
7.4.10 ipworksRadiusAccClientTotalPacketsDropped
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS packets that were received from the server on the accounting port and dropped for some other reason in the current GP. |
|
Condition |
Incremented for every received but dropped packets. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusAccProxyGroup |
7.5 AAARadiusIPallocGroup
This performance measurement group, called AAARadiusIPallocGroup, contains the measurements of events which are related to Radius Server IP Allocation.
>ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAARadiusIPallocGroup
This performance measurement group includes following measurements:
- ipworksRadiusServActiveIPv4LeaseNum
- ipworksRadiusServActiveIPv4LeasePercentage
- ipworksRadiusServConfiguredIPv4LeaseNum
- ipworksRadiusServActiveIPv6PrefixNum
- ipworksRadiusServActiveIPv6PrefixPercentage
- ipworksRadiusServConfiguredIPv6PrefixNum
7.5.1 ipworksRadiusServActiveIPv4LeaseNum
|
Attribute |
Value |
|---|---|
|
Description |
The number of the active IPv4 leases. |
|
Condition |
Incremented for every new active IPv4 lease and decremented for every active IPv4 lease that becomes free. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAARadiusIPallocGroup |
7.5.2 ipworksRadiusServActiveIPv4LeasePercentage
|
Attribute |
Value |
|---|---|
|
Description |
The percentage of the active IPv4 leases. |
|
Condition |
Incremented for every increased percentage of active IPv4 leases and decremented for every decreased percentage of active leases. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAARadiusIPallocGroup |
7.5.3 ipworksRadiusServConfiguredIPv4LeaseNum
|
Attribute |
Value |
|---|---|
|
Description |
The number of the configured IPv4 leases. |
|
Condition |
Changed whenever the operator changes the pool configuration for this server. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAARadiusIPallocGroup |
7.5.4 ipworksRadiusServActiveIPv6PrefixNum
|
Attribute |
Value |
|---|---|
|
Description |
The number of the active IPv6 prefix leases. |
|
Condition |
Incremented for every new active lease and decremented for every active lease that becomes free. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAARadiusIPallocGroup |
7.5.5 ipworksRadiusServActiveIPv6PrefixPercentage
|
Attribute |
Value |
|---|---|
|
Description |
The percentage of the active IPv6 prefix leases. |
|
Condition |
Incremented for every increased percentage of active IPv6 prefix leases and decremented for every decreased percentage of active IPv6 prefix leases. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAARadiusIPallocGroup |
7.5.6 ipworksRadiusServConfiguredIPv6PrefixNum
|
Attribute |
Value |
|---|---|
|
Description |
The number of the configured IPv6 prefix leases. |
|
Condition |
Changed whenever the operator changes the pool configuration for this server. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAARadiusIPallocGroup |
7.6 AAARadiusDynAuthzGroup
This performance measurement group, called AAARadiusDynAuthzGroup, contains the measurements of events which are related to Radius Dynamic Authorization.
>ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAARadiusDynAuthzGroup
This performance measurement group includes following measurements:
- ipworksRadiusServTotalDisconnectRequests
- ipworksRadiusServTotalFailedDisconnectRequests
- ipworksRadiusServTotalSuccessDisconnectRequests
- ipworksRadiusServTotalCoARequests
- ipworksRadiusServTotalFailedCoARequests
- ipworksRadiusServTotalSuccessCoARequests
7.6.1 ipworksRadiusServTotalDisconnectRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of Disconnect-Request packets sent to NAS by AAA server in the current GP. |
|
Condition |
Incremented for every Disconnect-Request packet sent. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzGroup |
7.6.2 ipworksRadiusServTotalFailedDisconnectRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of Disconnect-Request packets sending to NAS by AAA server but not receiving valid corresponding ACK messages, that is, time-out, NAK messages or invalid ACK messages in the current GP. |
|
Condition |
Incremented for every Disconnect-Request sending but not valid corresponding ACK message receiving, that is, time-out, NAK message or invalid ACK message. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzGroup |
7.6.3 ipworksRadiusServTotalSuccessDisconnectRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of Disconnect-Request packets sending to NAS by AAA server and successfully receiving corresponding ACK messages in the current GP. |
|
Condition |
Incremented for ACK messages receiving for corresponding Disconnect-Request. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzGroup |
7.6.4 ipworksRadiusServTotalCoARequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of CoA packets sent to NAS by AAA server in the current GP. |
|
Condition |
Incremented for every CoA packet sending. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzGroup |
7.6.5 ipworksRadiusServTotalFailedCoARequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of CoA packets sending to NAS by AAA Server but not receiving valid corresponding ACK messages, that is, timeout, NAK messages or invalid ACK messages in the current GP. |
|
Condition |
Incremented for every CoA packet sending but not valid corresponding ACK message receiving, that is, timeout, NAK message or invalid ACK message. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzGroup |
7.6.6 ipworksRadiusServTotalSuccessCoARequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of CoA packets sending to NAS by AAA server and successfully receiving corresponding ACK messages in the current GP. |
|
Condition |
Incremented for every CoA packet sending and corresponding ACK messages receiving. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzGroup |
7.7 AAARadiusDynAuthzProxyGroup
This performance measurement group, called AAARadiusDynAuthzProxyGroup, contains the measurements of events which are related to Radius Dynamic Authorization Proxy .
>ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAARadiusDynAuthzProxyGroup
This performance measurement group includes following measurements:
- ipworksRadiusServProxyTotalDisconnectRequests
- ipworksRadiusServProxyTotalFailedDisconnectRequests
- ipworksRadiusServProxyTotalSuccessDisconnectRequests
- ipworksRadiusServProxyTotalCoARequests
- ipworksRadiusServProxyTotalFailedCoARequests
- ipworksRadiusServProxyTotalSuccessCoARequests
7.7.1 ipworksRadiusServProxyTotalDisconnectRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of Disconnect-Request packets forwarded to AAA Client by AAA Server in the current GP. |
|
Condition |
Incremented for every Disconnect-Request packets forwarded. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzProxyGroup |
7.7.2 ipworksRadiusServProxyTotalFailedDisconnectRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of Disconnect-Request packets forwarded to AAA Client by AAA Server but not receiving valid corresponding ACK messages, that is, timeout, NAK messages or invalid ACK messages in the current GP. |
|
Condition |
Incremented for every Disconnect-Request packet forwarded but not receiving valid corresponding ACK message. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzProxyGroup |
7.7.3 ipworksRadiusServProxyTotalSuccessDisconnectRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of Disconnect-Request packets forwarded to AAA Client by AAA Server and successfully receiving corresponding ACK messages in the current GP. |
|
Condition |
Incremented for receiving ACK message for the corresponding Disconnect-Request packet. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzProxyGroup |
7.7.4 ipworksRadiusServProxyTotalCoARequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of CoA packets forwarded to AAA Client by AAA Server in the current GP. |
|
Condition |
Incremented for every CoA packet forwarded. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzProxyGroup |
7.7.5 ipworksRadiusServProxyTotalFailedCoARequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of CoA packets forwarded to AAA client by AAA server but not receiving valid corresponding ACK messages, that is, timeout, NAK messages or invalid ACK messages in the current GP. |
|
Condition |
Incremented for every CoA packet forwarded but not receiving valid corresponding ACK message. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzProxyGroup |
7.7.6 ipworksRadiusServProxyTotalSuccessCoARequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of CoA packets forwarded to AAA client by AAA server and successfully receiving corresponding ACK messages in the current GP. |
|
Condition |
Incremented for receiving ACK message for the corresponding CoA packet. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusDynAuthzProxyGroup |
7.8 AAARadiusFrontEndGroup
This performance measurement group, called AAARadiusFrontEndGroup, contains the measurements of events which are related to Radius Front End.
>ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAARadiusFrontEndGroup
This performance measurement group includes following measurements:
- ipworksRadiusServTotalDiscardedCUDBQueryRequests
- ipworksRadiusServTotalCUDBQueryRequests
- ipworksRadiusServTotalSuccessCUDBQueryRequests
- ipworksRadiusServTotalFailedCUDBQueryRequests
- ipworksRadiusServTotalDiscardedLoadRegulationRequests
- ipworksRadiusServTotalCUDBErrorCodeBusyResponses
- ipworksRadiusServTotalCUDBErrorCodeUnavailableResponses
- ipworksRadiusServTotalCUDBErrorCodeOtherResponses
7.8.1 ipworksRadiusServTotalDiscardedCUDBQueryRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of LDAP queries discarded by AAA-FE because AAA-FE cooperative load regulation is triggered in the current GP. |
|
Condition |
|
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusFrontEndGroup |
7.8.2 ipworksRadiusServTotalCUDBQueryRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of LDAP query packets sending to CUDB by AAA server in the current GP. |
|
Condition |
|
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusFrontEndGroup |
7.8.3 ipworksRadiusServTotalSuccessCUDBQueryRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of LDAP query packets sending to CUDB by AAA server and successfully receiving a corresponding response in the current GP. |
|
Condition |
Incremented for successfully receiving a response when AAA server sends a LDAP query to CUDB. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusFrontEndGroup |
7.8.4 ipworksRadiusServTotalFailedCUDBQueryRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of LDAP query packets sending to CUDB by AAA server but receiving no corresponding response or not receiving a valid response in the current GP. |
|
Condition |
Incremented for receiving invalid response or no response at all when AAA server sends a LDAP query to CUDB. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusFrontEndGroup |
7.8.5 ipworksRadiusServTotalDiscardedLoadRegulationRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of RADIUS packets discarded by AAA-FE because AAA-FE cooperative load regulation is triggered in the current GP. This counter focuses on calculating load regulation in traffic side. |
|
Condition |
Incremented for every request discarded by AAA-FE load regulation. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusFrontEndGroup |
7.8.6 ipworksRadiusServTotalCUDBErrorCodeBusyResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of response with error code 51 from CUDB after sending LDAP query in the current GP. |
|
Condition |
Incremented for every receiving of CUDB error code 51 (LDAP Busy). |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusFrontEndGroup |
7.8.7 ipworksRadiusServTotalCUDBErrorCodeUnavailableResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of response with error code 52 from CUDB after sending LDAP query in the current GP. |
|
Condition |
Incremented for every receiving of CUDB error code 52. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusFrontEndGroup |
7.8.8 ipworksRadiusServTotalCUDBErrorCodeOtherResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of response with error code 80 from CUDB after sending LDAP query in the current GP. |
|
Condition |
Incremented for every receiving of CUDB error code 80. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusFrontEndGroup |
7.9 AAARadiusOtherGroup
This performance measurement group, called AAARadiusOtherGroup, contains the measurements of events which are related to Radius AAA session.
>ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAARadiusOtherGroup
7.9.1 ipworksRadiusServTotalOverloadProtectionDiscardNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of Radius request discarded by AAA because AAA overload protection is triggered in the current GP. |
|
Condition |
Incremented for every request discarded by overload protection. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAARadiusOtherGroup |
7.9.2 ipworksRadiusServActiveSessionNumber
|
Attribute |
Value |
|---|---|
|
Description |
The total number of the active AAA sessions that the radius AAA server is handling. |
|
Condition |
Changed once a new AAA session is created or terminated. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster Level |
|
Measurement Object Class |
AAARadiusOtherGroup |
8 Measurements for EPC AAA
This section provides the performance measurement data regarding EPC AAA.
For all the performance measurement groups of EPC AAA, the default PM job is AAADiaDefaultPmJob. The default PM job is a measurement collection job. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=AAADiaDefaultPmJob.
The default job with the default value is as follows:
(PmJob=AAADiaDefaultPmJob)>show -v all
PmJob=AAADiaDefaultPmJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="AAADiaDefaultPmJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=AAASWmMr
measurementReaderId="AAASWmMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAASWmGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAASWxMr
measurementReaderId="AAASWxMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAASWxGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAADiaOtherMr
measurementReaderId="AAADiaOtherMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAADiaOtherGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAAS6bMr
measurementReaderId="AAAS6bMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAAS6bGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAASTaMr
measurementReaderId="AAASTaMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAASTaGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAASTaPlusMr
measurementReaderId="AAASTaPlusMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAASTaPlusGroup"
measurementTypeRef=[] <empty>
MeasurementReader=AAASWmPlusMr
measurementReaderId="AAASWmPlusMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=1,SystemFunctions=1,Pm=1,PmGroup=AAASWmPlusGroup"
measurementTypeRef=[] <empty>
|
8.1 AAASTaGroup
This performance measurement group, called AAASTaGroup, contains the measurements of events which are related to STa interface. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAASTaGroup
This performance measurement group includes following measurements:
- ipworksDiameterAAAActiveSTaSessionNumber
- ipworksDiameterAAASTaDER
- ipworksDiameterAAASTaDEA
- ipworksDiameterAAASTaAAR
- ipworksDiameterAAASTaAAA
- ipworksDiameterAAASTaASR
- ipworksDiameterAAASTaASA
- ipworksDiameterAAASTaSTR
- ipworksDiameterAAASTaSTA
- ipworksDiameterAAASTaRAR
- ipworksDiameterAAASTaRAA
- ipworksDiameterAAASTaInitialAuthRequests
- ipworksDiameterAAASTaReAuthRequests
- ipworksDiameterAAASTaAAAInitialAbortSessionRequests
- ipworksDiameterAAASTaEAPAKAPrimeAuthSuccessNumber
- ipworksDiameterAAASTaEAPAKAPrimeAuthFailedNumber
- ipworksDiameterAAASTaTPS
8.1.1 ipworksDiameterAAAActiveSTaSessionNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of active Diameter sessions for STa application. |
|
Condition |
Incremented when the initial authentication and authorization request from Trusted Non-3GPP Access Network is handled successfully; decremented when the session termination request from Trusted Non-3GPP Access Network is handled successfully. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAASTaGroup |
8.1.2 ipworksDiameterAAASTaDER
|
Attribute |
Value |
|---|---|
|
Description |
The number of DER messages for STa application in the current GP. |
|
Condition |
Incremented when DER messages are received from the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.3 ipworksDiameterAAASTaDEA
|
Attribute |
Value |
|---|---|
|
Description |
The number of DEA messages for STa application in the current GP. |
|
Condition |
Incremented when the AAA server sends DEA messages to the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.4 ipworksDiameterAAASTaAAR
|
Attribute |
Value |
|---|---|
|
Description |
The number of AAR messages for STa application in the current GP. |
|
Condition |
Incremented when AAR messages are received from the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.5 ipworksDiameterAAASTaAAA
|
Attribute |
Value |
|---|---|
|
Description |
The number of AAA messages for STa application in the current GP. |
|
Condition |
Incremented when the AAA server sends AAA messages to the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.6 ipworksDiameterAAASTaASR
|
Attribute |
Value |
|---|---|
|
Description |
The number of ASR messages for STa application in the current GP. |
|
Condition |
Incremented when ASR messages are received from the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.7 ipworksDiameterAAASTaASA
|
Attribute |
Value |
|---|---|
|
Description |
The number of ASA messages for STa application in the current GP. |
|
Condition |
Incremented when ASA messages are received from the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.8 ipworksDiameterAAASTaSTR
|
Attribute |
Value |
|---|---|
|
Description |
The number of STR messages for STa application in the current GP. |
|
Condition |
Incremented when STR messages are received from the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.9 ipworksDiameterAAASTaSTA
|
Attribute |
Value |
|---|---|
|
Description |
The number of STA messages for STa application. |
|
Condition |
Incremented when the AAA server sends STA messages to the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.10 ipworksDiameterAAASTaRAR
|
Attribute |
Value |
|---|---|
|
Description |
The number of RAR messages for STa application. |
|
Condition |
Incremented when the AAA server sends RAR messages to the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.11 ipworksDiameterAAASTaRAA
|
Attribute |
Value |
|---|---|
|
Description |
The number of RAA messages for STa application in the current GP. |
|
Condition |
Incremented when RAA messages are received from Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.12 ipworksDiameterAAASTaInitialAuthRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of initial authentication and authorization requests for STa application in the current GP. |
|
Condition |
Incremented when the initial authentication and authorization request is received from Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.13 ipworksDiameterAAASTaReAuthRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of re-authentication and re-authorization requests for STa application in the current GP. |
|
Condition |
Incremented when the re-authentication and re-authorization request is received from Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.14 ipworksDiameterAAASTaAAAInitialAbortSessionRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of AAA intiated session termination requests for STa application in the current GP. |
|
Condition |
Incremented when the AAA server initiated the session termination request to the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.15 ipworksDiameterAAASTaEAPAKAPrimeAuthSuccessNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of success EAP-AKA' authentication (including initial auth and re-auth using IMSI, Pseudonym, Fast) for STa application in current GP. |
|
Condition |
Incremented when the EAP-AKA' authentication is successful. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.16 ipworksDiameterAAASTaEAPAKAPrimeAuthFailedNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of failed EAP-AKA' authentication (including initial auth and re-auth using IMSI, Pseudonym, Fast) for STa application in the current GP. |
|
Condition |
Incremented when the EAP-AKA' authentication is failed. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.1.17 ipworksDiameterAAASTaTPS
|
Attribute |
Value |
|---|---|
|
Description |
The average value of the TPS for STa application (which are sampled and calculated every 10 seconds) in the current GP. |
|
Condition |
Incremented when DER(EAP/Identity) are received from Trusted Non-3GPP Access Network. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaGroup |
8.2 AAASTaPlusGroup
This performance measurement group, called AAASTaPlusGroup, contains the measurements of events which are related to STaPlus interface.
- Note:
- This group is reserved for the future development.
The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAASTaPlusGroup
This performance measurement group includes the following measurements:
- ipworksDiameterAAAActiveSTaPlusSessionNumber
- ipworksDiameterAAASTaPlusDER
- ipworksDiameterAAASTaPlusDEA
- ipworksDiameterAAASTaPlusASR
- ipworksDiameterAAASTaPlusASA
- ipworksDiameterAAASTaPlusSTR
- ipworksDiameterAAASTaPlusSTA
- ipworksDiameterAAASTaPlusEAPAKAAuthSuccessNumber
- ipworksDiameterAAASTaPlusEAPAKAAuthFailedNumber
- ipworksDiameterAAASTaPlusFastEAPAKAReAuthSuccessNumber
- ipworksDiameterAAASTaPlusFastEAPAKAReAuthFailedNumber
- ipworksDiameterAAASTaPlusEAPAKAPrimeAuthSuccessNumber
- ipworksDiameterAAASTaPlusEAPAKAPrimeAuthFailedNumber
- ipworksDiameterAAASTaPlusFastEAPAKAPrimeReAuthSuccessNumber
- ipworksDiameterAAASTaPlusFastEAPAKAPrimeReAuthFailedNumber
- ipworksDiameterAAASTaPlusTPS
8.2.1 ipworksDiameterAAAActiveSTaPlusSessionNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of active Diameter sessions for STaPlus application. |
|
Condition |
Incremented when the requests of initial authentication and authorization from the Trusted Non-3GPP Access Network are processed successfully; Decremented when the requests of session termination from the Trusted Non-3GPP Access Network are processed successfully. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.2 ipworksDiameterAAASTaPlusDER
|
Attribute |
Value |
|---|---|
|
Description |
The number of DER messages for STaPlus application in the current GP. |
|
Condition |
Incremented when DER messages are received from the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.3 ipworksDiameterAAASTaPlusDEA
|
Attribute |
Value |
|---|---|
|
Description |
The number of DEA messages for STaPlus application in the current GP. |
|
Condition |
Incremented when the AAA server sends DEA messages to the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.4 ipworksDiameterAAASTaPlusASR
|
Attribute |
Value |
|---|---|
|
Description |
The number of ASR messages for STaPlus application in the current GP. |
|
Condition |
Incremented when ASR messages are received from the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.5 ipworksDiameterAAASTaPlusASA
|
Attribute |
Value |
|---|---|
|
Description |
The number of ASA messages for STaPlus application in the current GP. |
|
Condition |
Incremented when ASA messages are received from the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.6 ipworksDiameterAAASTaPlusSTR
|
Attribute |
Value |
|---|---|
|
Description |
The number of STR messages for STaPlus application in the current GP. |
|
Condition |
Incremented when STR messages are received from the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.7 ipworksDiameterAAASTaPlusSTA
|
Attribute |
Value |
|---|---|
|
Description |
The number of STA messages for STaPlus application in the current GP. |
|
Condition |
Incremented when the AAA server sends STA messages to the Trusted Non-3GPP Access Network. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.8 ipworksDiameterAAASTaPlusEAPAKAAuthSuccessNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of success EAP-AKA authentication (including initial auth and re-auth using IMSI, Pseudonym) for STaPlus application in the current GP. |
|
Condition |
Incremented when the full EAP-AKA authentication is successful. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.9 ipworksDiameterAAASTaPlusEAPAKAAuthFailedNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of failed EAP-AKA authentication (including initial auth and re-auth using IMSI, Pseudonym) for STaPlus application in the current GP. |
|
Condition |
Incremented when the full EAP-AKA authentication fails. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.10 ipworksDiameterAAASTaPlusFastEAPAKAReAuthSuccessNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of success EAP-AKA fast re-authentication for STaPlus application in the current GP. |
|
Condition |
Incremented when the EAP-AKA fast re-authentication is successful. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.11 ipworksDiameterAAASTaPlusFastEAPAKAReAuthFailedNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of failed EAP-AKA fast re-authentication for STaPlus application in the current GP. |
|
Condition |
Incremented when the EAP-AKA fast re-authentication is failed. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.12 ipworksDiameterAAASTaPlusEAPAKAPrimeAuthSuccessNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of success EAP-AKAPrime authentication (including initial auth and re-auth using IMSI, Pseudonym) for STaPlus application in the current GP. |
|
Condition |
Incremented when the EAP-AKA' authentication is successful. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.13 ipworksDiameterAAASTaPlusEAPAKAPrimeAuthFailedNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of failed EAP-AKAPrime authentication (including initial auth and re-auth using IMSI, Pseudonym) for STaPlus application in the current GP. |
|
Condition |
Incremented when the EAP-AKA' authentication is failed. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.14 ipworksDiameterAAASTaPlusFastEAPAKAPrimeReAuthSuccessNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of success EAP-AKAPrime fast re-authentication for STaPlus application in the current GP. |
|
Condition |
Incremented when the EAP-AKA' fast re-authentication is successful. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.15 ipworksDiameterAAASTaPlusFastEAPAKAPrimeReAuthFailedNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of failed EAP-AKAPrime fast re-authentication for STaPlus application in the current GP. |
|
Condition |
Incremented when the EAP-AKA' fast re-authentication is failed. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.2.16 ipworksDiameterAAASTaPlusTPS
|
Attribute |
Value |
|---|---|
|
Description |
The average value of the TPS for STaPlus application (which are sampled and calculated every 10 seconds) in the current GP. |
|
Condition |
Incremented when DER (EAP/Identity) are received from Trusted Non-3GPP Access Network. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASTaPlusGroup |
8.3 AAASWmGroup
This performance measurement group, called AAASWmGroup, contains the measurements for events which are related to EPC AAA SWm interface. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAASWmGroup
This performance measurement group includes following measurements:
- ipworksDiameterAAAActiveSWmSessionNumber
- ipworksDiameterAAASWmDER
- ipworksDiameterAAASWmDEA
- ipworksDiameterAAASWmAAR
- ipworksDiameterAAASWmAAA
- ipworksDiameterAAASWmASR
- ipworksDiameterAAASWmASA
- ipworksDiameterAAASWmDERForEC
- ipworksDiameterAAASWmDEAForEC
- ipworksDiameterAAASWmSTR
- ipworksDiameterAAASWmSTA
- ipworksDiameterAAASWmRAR
- ipworksDiameterAAASWmRAA
- ipworksDiameterAAASWmEAPAKAAuthSuccessNumber
- ipworksDiameterAAASWmEAPAKAAuthFailedNumber
- ipworksDiameterAAASWmFastEAPAKAReAuthSuccessNumber
- ipworksDiameterAAASWmFastEAPAKAReAuthFailedNumber
- ipworksDiameterAAASWmTPS
8.3.1 ipworksDiameterAAAActiveSWmSessionNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of active Diameter sessions for SWm application. |
|
Condition |
Incremented when the requests of initial authentication and authorization from the Untrusted Non-3GPP Access Network are processed successfully; Decremented when the requests of session termination from the Untrusted Non-3GPP Access Network are processed successfully. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAASWmGroup |
8.3.2 ipworksDiameterAAASWmDER
|
Attribute |
Value |
|---|---|
|
Description |
The number of DER messages for SWm application in the current GP. |
|
Condition |
Incremented when DER messages are received from the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.3 ipworksDiameterAAASWmDEA
|
Attribute |
Value |
|---|---|
|
Description |
The number of DEA messages for SWm application in the current GP. |
|
Condition |
Incremented when the AAA server sends DEA messages to the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.4 ipworksDiameterAAASWmAAR
|
Attribute |
Value |
|---|---|
|
Description |
The number of AAR messages for SWm application in the current GP. |
|
Condition |
Incremented when AAR messages are received from the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.5 ipworksDiameterAAASWmAAA
|
Attribute |
Value |
|---|---|
|
Description |
The number of AAA messages for SWm application in the current GP. |
|
Condition |
Incremented when the AAA server sends AAA messages to the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.6 ipworksDiameterAAASWmASR
|
Attribute |
Value |
|---|---|
|
Description |
The number of ASR messages for SWm application in the current GP. |
|
Condition |
Incremented when ASR messages are received from the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.7 ipworksDiameterAAASWmASA
|
Attribute |
Value |
|---|---|
|
Description |
The number of ASA messages for SWm application in the current GP. |
|
Condition |
Incremented when ASA messages are received from the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.8 ipworksDiameterAAASWmDERForEC
|
Attribute |
Value |
|---|---|
|
Description |
The number of emergency DER messages for SWm application in the current GP. |
|
Condition |
Incremented when emergency DER messages are received from the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
SaUint32T |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.9 ipworksDiameterAAASWmDEAForEC
|
Attribute |
Value |
|---|---|
|
Description |
The number of emergency DEA messages for SWm application in the current GP. |
|
Condition |
Incremented when the AAA server sends emergency DEA messages to the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
SaUint32T |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.10 ipworksDiameterAAASWmSTR
|
Attribute |
Value |
|---|---|
|
Description |
The number of STR messages for SWm application in the current GP. |
|
Condition |
Incremented when STR messages are received from the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.11 ipworksDiameterAAASWmSTA
|
Attribute |
Value |
|---|---|
|
Description |
The number of STA messages for SWm application in the current GP. |
|
Condition |
Incremented when the AAA server sends STA messages to the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.12 ipworksDiameterAAASWmRAR
|
Attribute |
Value |
|---|---|
|
Description |
The number of RAR messages for SWm application in the current GP. |
|
Condition |
Incremented when the AAA server sends RAR messages to the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.13 ipworksDiameterAAASWmRAA
|
Attribute |
Value |
|---|---|
|
Description |
The number of RAA messages for SWm application in the current GP. |
|
Condition |
Incremented when RAA messages are received from the Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.14 ipworksDiameterAAASWmEAPAKAAuthSuccessNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of success EAP-AKA authentication (including initial auth and re-auth using IMSI, Pseudonym) for SWm application in the current GP. |
|
Condition |
Incremented when the full EAP-AKA authentication is successful. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.15 ipworksDiameterAAASWmEAPAKAAuthFailedNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of failed EAP-AKA authentication (including initial auth and re-auth using IMSI, Pseudonym) for SWm application in the current GP. |
|
Condition |
Incremented when the full EAP-AKA authentication fails. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.16 ipworksDiameterAAASWmFastEAPAKAReAuthSuccessNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of success fast EAP-AKA re-authentication for SWm application in the current GP. |
|
Condition |
Incremented when the fast EAP-AKA re-authentication is successful. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.17 ipworksDiameterAAASWmFastEAPAKAReAuthFailedNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of failed fast EAP-AKA re-authentication for SWm application in the current GP. |
|
Condition |
Incremented when the fast EAP-AKA re-authentication is failed. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.3.18 ipworksDiameterAAASWmTPS
|
Attribute |
Value |
|---|---|
|
Description |
The average value of the TPS for SWm application (which are sampled and calculated every 10 seconds) in the current GP. |
|
Condition |
Incremented when DER (EAP/Identity) messages are received from Untrusted Non-3GPP Access Network during EAP-AKA authentication. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.4 AAASWmPlusGroup
This performance measurement group, called AAASWmPlusGroup, contains the measurements for events which are related to EPC AAA SWmPlus interface. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAASWmPlusGroup
This performance measurement group includes following measurements:
- ipworksDiameterAAAActiveSWmPlusSessionNumber
- ipworksDiameterAAASWmPlusDER
- ipworksDiameterAAASWmPlusDERForEC
- ipworksDiameterAAASWmPlusDEAForEC
- ipworksDiameterAAASWmPlusDEA
- ipworksDiameterAAASWmPlusAAR
- ipworksDiameterAAASWmPlusAAA
- ipworksDiameterAAASWmPlusASR
- ipworksDiameterAAASWmPlusASA
- ipworksDiameterAAASWmPlusSTR
- ipworksDiameterAAASWmPlusSTA
- ipworksDiameterAAASWmPlusEAPTLSAuthSuccessNumber
- ipworksDiameterAAASWmPlusEAPTLSAuthFailedNumber
- ipworksDiameterAAASWmPlusTPS
8.4.1 ipworksDiameterAAAActiveSWmPlusSessionNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of active Diameter sessions for SWmPlus application. |
|
Condition |
Incremented when the requests of initial authentication and authorization from the Untrusted Non-3GPP Access Network are processed successfully; Decremented when the requests of session termination from the Untrusted Non-3GPP Access Network are processed successfully. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.2 ipworksDiameterAAASWmPlusDER
|
Attribute |
Value |
|---|---|
|
Description |
The number of DER messages for SWmPlus application in the current GP. |
|
Condition |
Incremented when DER messages are received from the Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.3 ipworksDiameterAAASWmPlusDERForEC
|
Attribute |
Value |
|---|---|
|
Description |
The number of emergency DER messages for SWmPlus application in the current GP. |
|
Condition |
Incremented when emergency DER messages are received from the Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
SaUint32T |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.4 ipworksDiameterAAASWmPlusDEAForEC
|
Attribute |
Value |
|---|---|
|
Description |
The number of emergency DEA messages for SWmPlus application in the current GP. |
|
Condition |
Incremented when the AAA server sends emergency DEA messages to the Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
SaUint32T |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.5 ipworksDiameterAAASWmPlusDEA
|
Attribute |
Value |
|---|---|
|
Description |
The number of DEA messages for SWmPlus application in the current GP. |
|
Condition |
Incremented when the AAA server sends DEA messages to the Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.6 ipworksDiameterAAASWmPlusAAR
|
Attribute |
Value |
|---|---|
|
Description |
The number of AAR messages for SWmPlus application in the current GP. |
|
Condition |
Incremented when AAR messages are received from the Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.7 ipworksDiameterAAASWmPlusAAA
|
Attribute |
Value |
|---|---|
|
Description |
The number of AAA messages for SWmPlus application in the current GP. |
|
Condition |
Incremented when the AAA server sends AAA messages to the Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.8 ipworksDiameterAAASWmPlusASR
|
Attribute |
Value |
|---|---|
|
Description |
The number of ASR messages for SWmPlus application in the current GP. |
|
Condition |
Incremented when ASR messages are received from the Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.9 ipworksDiameterAAASWmPlusASA
|
Attribute |
Value |
|---|---|
|
Description |
The number of ASA messages for SWmPlus application in the current GP. |
|
Condition |
Incremented when ASA messages are received from the Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.10 ipworksDiameterAAASWmPlusSTR
|
Attribute |
Value |
|---|---|
|
Description |
The number of STR messages for SWmPlus application in the current GP. |
|
Condition |
Incremented when STR messages are received from the Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.11 ipworksDiameterAAASWmPlusSTA
|
Attribute |
Value |
|---|---|
|
Description |
The number of STA messages for SWm application in the current GP. |
|
Condition |
Incremented when the AAA server sends STA messages to the Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.12 ipworksDiameterAAASWmPlusEAPTLSAuthSuccessNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of success EAP-TLS authentication for SWmPlus application in the current GP. |
|
Condition |
Incremented when the EAP-TLS authentication is successful. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.13 ipworksDiameterAAASWmPlusEAPTLSAuthFailedNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of failed EAP-TLS authentication for SWmPlus application in the current GP. |
|
Condition |
Incremented when the EAP-TLS authentication is failed. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.4.14 ipworksDiameterAAASWmPlusTPS
|
Attribute |
Value |
|---|---|
|
Description |
The average value of the TPS for SWmPlus application (which are sampled and calculated every 10 seconds) in the current GP. |
|
Condition |
Incremented when DER (EAP/Identity) are received from Untrusted Non-3GPP Access Network during EAP-TLS authentication. |
|
Collection Method |
Gauge |
|
Aggregation |
MAX |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmPlusGroup |
8.5 AAAS6bGroup
This performance measurement group, called AAAS6bGroup, contains the measurements for events which are related to S6b interface. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAAS6bGroup
This performance measurement group includes the following measurements:
- ipworksDiameterAAAActiveS6bSessionNumber
- ipworksDiameterAAAS6bAAR
- ipworksDiameterAAAS6bAAA
- ipworksDiameterAAAS6bSTR
- ipworksDiameterAAAS6bSTA
- ipworksDiameterAAAS6bRAR
- ipworksDiameterAAAS6bRAA
- ipworksDiameterAAAS6bAARInitialAuthorizationRequests
- ipworksDiameterAAAS6bAARReAuthorizationRequests
- ipworksDiameterAAAS6bTPS
8.5.1 ipworksDiameterAAAActiveS6bSessionNumber
|
Attribute |
Value |
|---|---|
|
Description |
The number of active Diameter sessions for S6b application. |
|
Condition |
Incremented when the initial authorization request from the PDN-GW is handled successfully; decremented when the session termination request from the PDN-GW is handled successfully. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
AAAS6bGroup |
8.5.2 ipworksDiameterAAAS6bAAR
|
Attribute |
Value |
|---|---|
|
Description |
The number of AAR messages for S6b application in the current GP. |
|
Condition |
Incremented when AAR messages are received from the PDN-GW. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS6bGroup |
8.5.3 ipworksDiameterAAAS6bAAA
|
Attribute |
Value |
|---|---|
|
Description |
The number of AAA messages for S6b application in the current GP. |
|
Condition |
Incremented when the AAA server sends AAA messages to the PDN-GW. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS6bGroup |
8.5.4 ipworksDiameterAAAS6bSTR
|
Attribute |
Value |
|---|---|
|
Description |
The number of STR messages for S6b application in the current GP. |
|
Condition |
Incremented when STR messages are received from the PDN-GW. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS6bGroup |
8.5.5 ipworksDiameterAAAS6bSTA
|
Attribute |
Value |
|---|---|
|
Description |
The number of STA messages for S6b application in the current GP. |
|
Condition |
Incremented when the AAA server sends STA messages to the PDN-GW. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS6bGroup |
8.5.6 ipworksDiameterAAAS6bRAR
|
Attribute |
Value |
|---|---|
|
Description |
The number of RAR messages for S6b application in the current GP. |
|
Condition |
Incremented when the AAA server sends RAR messages to the PDN-GW. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS6bGroup |
8.5.7 ipworksDiameterAAAS6bRAA
|
Attribute |
Value |
|---|---|
|
Description |
The number of RAA messages for S6b application in the current GP. |
|
Condition |
Incremented when RAA messages are received from the PDG-GW. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS6bGroup |
8.5.8 ipworksDiameterAAAS6bAARInitialAuthorizationRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of initial authorization requests for S6b application in the current GP. |
|
Condition |
Incremented when the initial authorization request is received from PDN-GW. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS6bGroup |
8.5.9 ipworksDiameterAAAS6bAARReAuthorizationRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of re-authorization requests for S6b application in the current GP. |
|
Condition |
Incremented when the re-authorization request is received from PDN-GW. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS6bGroup |
8.5.10 ipworksDiameterAAAS6bTPS
|
Attribute |
Value |
|---|---|
|
Description |
The average value of the TPS for S6b application (which are sampled and calculated every 10 seconds) in the current GP. |
|
Condition |
Incremented when Requests are received from the PDN-GW. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS6bGroup |
8.6 AAASWxGroup
This performance measurement group, called AAASWxGroup, contains a measurement for events which are related to SWx interface. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAASWxGroup
This performance measurement group includes following measurements:
- ipworksDiameterAAASWxMAR
- ipworksDiameterAAASWxMAA
- ipworksDiameterAAASWxSAR
- ipworksDiameterAAASWxSAA
- ipworksDiameterAAASWxPPR
- ipworksDiameterAAASWxPPA
- ipworksDiameterAAASWxPTR
- ipworksDiameterAAASWxPTA
- ipworksDiameterAAASWxMARFetchAuthVecRequests
- ipworksDiameterAAASWxSARFetchUserProfileRequests
- ipworksDiameterAAASWxSARRegistrationRequests
- ipworksDiameterAAASWxSARDeRegistrationRequest
- ipworksDiameterAAASWxSARUpdatePGWInfoRequest
- ipworksDiameterAAASWxRoamingNotAllowed
- ipworksDiameterAAASWxTPS
- ipworksDiameterAAASARThrottled
- ipworksDiameterAAAMARThrottled
8.6.1 ipworksDiameterAAASWxMAR
|
Attribute |
Value |
|---|---|
|
Description |
The number of MAR messages for SWx application in the current GP. |
|
Condition |
|
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.2 ipworksDiameterAAASWxMAA
|
Attribute |
Value |
|---|---|
|
Description |
The number of MAA messages for SWx application in the current GP. |
|
Condition |
Incremented when the AAA server receives MAA messages from HSS. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.3 ipworksDiameterAAASWxSAR
|
Attribute |
Value |
|---|---|
|
Description |
The number of SAR messages for SWx application in the current GP. |
|
Condition |
|
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.4 ipworksDiameterAAASWxSAA
|
Attribute |
Value |
|---|---|
|
Description |
The number of SAA messages for SWx application in the current GP. |
|
Condition |
Incremented when the AAA server receives SAA messages from HSS. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.5 ipworksDiameterAAASWxPPR
|
Attribute |
Value |
|---|---|
|
Description |
The number of PPR messages for SWx application in the current GP. |
|
Condition |
|
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.6 ipworksDiameterAAASWxPPA
|
Attribute |
Value |
|---|---|
|
Description |
The number of PPA messages for SWx application in the current GP. |
|
Condition |
Incremented when the AAA server receives PPA messages from HSS. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.6.7 ipworksDiameterAAASWxPTR
|
Attribute |
Value |
|---|---|
|
Description |
The number of PTR messages for SWx application in the current GP. |
|
Condition |
|
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.6.8 ipworksDiameterAAASWxPTA
|
Attribute |
Value |
|---|---|
|
Description |
The number of PTA messages for SWx application in the current GP. |
|
Condition |
Incremented when the AAA server receives PTA messages from HSS. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.9 ipworksDiameterAAASWxMARFetchAuthVecRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of requests that fetch authentication vectors from HSS for SWx application in the current GP. |
|
Condition |
Incremented when the AAA server fetches the authentication vector from HSS. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWmGroup |
8.6.10 ipworksDiameterAAASWxSARFetchUserProfileRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of requests that fetch user profile from HSS for SWx application in the current GP. |
|
Condition |
Incremented when the AAA server fetches the user profile from HSS. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.11 ipworksDiameterAAASWxSARRegistrationRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of requests that register Non-3GPP user to HSS for SWx application in the current GP. |
|
Condition |
Incremented when the user authentication and authorization is success and the AAA server register the user in HSS. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.12 ipworksDiameterAAASWxSARDeRegistrationRequest
|
Attribute |
Value |
|---|---|
|
Description |
The number of requests that deregister Non-3GPP user from HSS for SWx application in the current GP. |
|
Condition |
Incremented when the STa Session is terminated and the AAA server deregister the user in HSS. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.13 ipworksDiameterAAASWxSARUpdatePGWInfoRequest
|
Attribute |
Value |
|---|---|
|
Description |
The number of requests that update PDN-GW info in HSS for SWx application in the current GP. |
|
Condition |
Incremented when the AAA server update the PDN-GW information in HSS successfully. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.14 ipworksDiameterAAASWxRoamingNotAllowed
|
Attribute |
Value |
|---|---|
|
Description |
The total number of Roaming Not Allowed messages for SWx application in the current GP. |
|
Condition |
Incremented when an MAA message with Experimental-Result-Code indicating DIAMETER_ERROR_ROAMING_NOT_ALLOWED is received. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.15 ipworksDiameterAAASWxTPS
|
Attribute |
Value |
|---|---|
|
Description |
The average value of the TPS for SWx application (which are sampled and calculated every 10 seconds) in the current GP. |
|
Condition |
Incremented when Requests are sent to HSS. |
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.16 ipworksDiameterAAASARThrottled
|
Attribute |
Value |
|---|---|
|
Description |
The number of throttled SAR messages for SWx application when EPC SWx throttling function is enabled. |
|
Condition |
Incremented when the AAA server throttles SAR messages and meanwhile EPC SWx throttling function is enabled. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.6.17 ipworksDiameterAAAMARThrottled
|
Attribute |
Value |
|---|---|
|
Description |
The number of throttled MAR messages for SWx application when EPC SWx throttling function is enabled. |
|
Condition |
Incremented when the AAA server throttles MAR messages and meanwhile EPC SWx throttling function is enabled. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAASWxGroup |
8.7 AAADiaOtherGroup
This performance measurement group, called AAADiaOtherGroup, contains the measurements of other events which are related to EPC AAA. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAADiaOtherGroup
This performance measurement group includes the following measurements:
- ipworksDiameterAAAMAPATIRequests
- ipworksDiameterAAAMAPATIResponses
- ipworksDiameterAAAOCSPRequests
- ipworksDiameterAAAOCSPResponses
- ipworksDiameterAAAProcessUpTime
- ipworksDiameterAAAHealthStatus
8.7.1 ipworksDiameterAAAMAPATIRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of MAP ATI Request messages for Diameter AAA application in the current GP. |
|
Condition |
Incremented when Diameter AAA server sends an MAP ATI request message to HLR. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaOtherGroup |
8.7.2 ipworksDiameterAAAMAPATIResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of MAP ATI Response messages for AAA Diameter application in the current GP. |
|
Condition |
Incremented when Diameter AAA server receives a MAP ATI response message from HLR. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaOtherGroup |
8.7.3 ipworksDiameterAAAOCSPRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of OCSP Request messages to CA server in the current GP. |
|
Condition |
Incremented when Diameter AAA server sends an OCSP request message to CA server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaOtherGroup |
8.7.4 ipworksDiameterAAAOCSPResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of OCSP Response messages received from CA server in the current GP. |
|
Condition |
Incremented when Diameter AAA server receives an OCSP response message from CA server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaOtherGroup |
8.7.5 ipworksDiameterAAAProcessUpTime
|
Attribute |
Value |
|---|---|
|
Description |
The number of seconds since the server was started. |
|
Condition |
The value is incremented for every second the AAA Diameter server is running. |
|
Collection Method |
Gauge |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaOtherGroup |
8.7.6 ipworksDiameterAAAHealthStatus
|
Attribute |
Value |
|---|---|
|
Description |
The Diameter AAA service health status. It shows the current Diameter AAA traffic level, the value range is 1-10. The value "1" means that the current Diameter AAA traffic is less than 10% of its max traffic; the value 10 means that Diameter AAA reaches its max traffic. |
|
Condition |
Level value will be changed when the result of (current TPS)/(MAX TPS) change. |
|
Collection Method |
Status Inspection |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaOtherGroup |
8.8 AAAS13Group
This performance measurement group, called AAAS13Group, contains a measurement for events which are related to S13 interface. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAAS13Group
This performance measurement group includes following measurements:
8.8.1 ipworksDiameterAAAS13ECR
|
Attribute |
Value |
|---|---|
|
Description |
The number of ECR messages for S13 application in the current GP. |
|
Condition |
|
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS13Group |
8.8.2 ipworksDiameterAAAS13ECA
|
Attribute |
Value |
|---|---|
|
Description |
The number of ECA messages for S13 application in the current GP. |
|
Condition |
Incremented when the AAA server receives ECA messages from EIR. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAAS13Group |
8.9 AAADiaFrontEndGroup
This performance measurement group, called AAADiaFrontEndGroup, contains the measurements of events which are related to AAA Front End (PKI), also named PKI-FE.
>ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=AAADiaFrontEndGroup
This performance measurement group includes following measurements:
- Section 8.9.1 ipworksDiameterServTotalDiscardedCUDBQueryRequests
- Section 8.9.2 ipworksDiameterServTotalCUDBQueryRequests
- Section 8.9.3 ipworksDiameterServTotalSuccessCUDBQueryRequests
- Section 8.9.4 ipworksDiameterServTotalFailedCUDBQueryRequests
- Section 8.9.5 ipworksDiameterServTotalDiscardedLoadRegulationRequests
- Section 8.9.6 ipworksDiameterServTotalCUDBErrorCodeBusyResponses
- Section 8.9.7 ipworksDiameterServTotalCUDBErrorCodeUnavailableResponses
- Section 8.9.8 ipworksDiameterServTotalCUDBErrorCodeOtherResponses
8.9.1 ipworksDiameterServTotalDiscardedCUDBQueryRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of LDAP queries discarded by PKI-FE because PKI-FE cooperative load regulation is triggered in the current GP. |
|
Condition |
|
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaFrontEndGroup |
8.9.2 ipworksDiameterServTotalCUDBQueryRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of LDAP query packets sending to CUDB by AAA server in the current GP. |
|
Condition |
|
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaFrontEndGroup |
8.9.3 ipworksDiameterServTotalSuccessCUDBQueryRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of LDAP query packets sending to CUDB by AAA server and successfully receiving a corresponding response in the current GP. |
|
Condition |
Incremented for receiving a successful response when AAA server sends a LDAP query to CUDB. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaFrontEndGroup |
8.9.4 ipworksDiameterServTotalFailedCUDBQueryRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of LDAP query packets sending to CUDB by AAA server but receiving no corresponding response or not receiving a valid response in the current GP. |
|
Condition |
Incremented for receiving invalid response or no response at all when AAA server sends a LDAP query to CUDB. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaFrontEndGroup |
8.9.5 ipworksDiameterServTotalDiscardedLoadRegulationRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of Diameter packets discarded by PKI-FE because PKI-FE cooperative load regulation is triggered in the current GP. This counter focuses on calculating load regulation in traffic side. |
|
Condition |
Incremented for every request discarded by PKI-FE load regulation. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaFrontEndGroup |
8.9.6 ipworksDiameterServTotalCUDBErrorCodeBusyResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of response with error code 51 from CUDB after sending LDAP query in the current GP. |
|
Condition |
Incremented for every receiving of CUDB error code 51 (LDAP Busy). |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaFrontEndGroup |
8.9.7 ipworksDiameterServTotalCUDBErrorCodeUnavailableResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of response with error code 52 from CUDB after sending LDAP query in the current GP. |
|
Condition |
Incremented for every receiving of CUDB error code 52. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaFrontEndGroup |
8.9.8 ipworksDiameterServTotalCUDBErrorCodeOtherResponses
|
Attribute |
Value |
|---|---|
|
Description |
The number of response with error code 80 from CUDB after sending LDAP query in the current GP. |
|
Condition |
Incremented for every receiving of CUDB error code 80. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
AAADiaFrontEndGroup |
9 Measurements for DHCPv4
This section provides the performance measurement data regarding DHCPv4. In addition, the default PM job is described for each performance measurement group.
9.1 DHCPv4MessageGroup
This performance measurement group, called DHCPv4MessageGroup, contains measurements for events which are related to DHCPv4 messages. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4MessageGroup
Most of the measurements (excluding ipworksDhcpv4TransactionPerSecond) are in a measurement collection job, the default PM job is DHCPv4DefaultPmJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DHCPv4DefaultPmJob
The default job with the default value is as follows:
PmJob=DHCPv4DefaultPmJob
compressionType=[] <empty>
currentJobState=[] <empty> <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DHCPv4DefaultPmJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=DHCPv4MessageMr
measurementReaderId="DHCPv4MessageMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4MessageGroup"
measurementTypeRef=[] <empty>
|
ipworksDhcpv4TransactionPerSecond is in a threshold monitoring job. The default PM job is DHCPv4DefaultPmThresholdJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DHCPv4DefaultPmThresholdJob
The default job with the default value is as follows:
PmJob=DHCPv4DefaultPmThresholdJob
compressionType=[] <empty>
currentJobState=[] <empty> <read-only>
granularityPeriod=ONE_MIN
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=THRESHOLDJOB
pmJobId="DHCPv4DefaultPmThresholdJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=TransactionPerSecondMr
measurementReaderId="TransactionPerSecondMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef=[] <empty>
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4MessageGroup,MeasurementType=ipworksDhcpv4TransactionPerSecond"
PmThresholdMonitoring=TPSExceedThresholdLevel2
pmThresholdMonitoringId="TPSExceedThresholdLevel2"
thresholdHigh=9200
thresholdLow=8800
thresholdSeverity=MAJOR
PmThresholdMonitoring=TPSExceedThresholdLevel1
pmThresholdMonitoringId="TPSExceedThresholdLevel1"
thresholdHigh=8200
thresholdLow=7800
thresholdSeverity=MINOR <default>
|
This performance measurement group includes following measurements:
- ipworksDhcpv4CountBOOTPRequests
- ipworksDhcpv4CountBOOTPReplies
- ipworksDhcpv4CountBOOTPTotal
- ipworksDhcpv4CountDHCPDiscovers
- ipworksDhcpv4CountDHCPOffers
- ipworksDhcpv4CountDHCPRequests
- ipworksDhcpv4CountDHCPAcks
- ipworksDhcpv4CountDHCPNacks
- ipworksDhcpv4CountDHCPInforms
- ipworksDhcpv4CountDHCPDeclines
- ipworksDhcpv4CountDHCPReleases
- ipworksDhcpv4CountDHCPTotal
- ipworksDhcpv4TransactionPerSecond
9.1.1 ipworksDhcpv4CountBOOTPRequests
|
Attribute |
Value |
|---|---|
|
Description |
Count of BOOTP request messages received by the server. If the server does not process BOOTP messages, this value will be zero. |
|
Condition |
Successful receive of a BOOTP request message. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.2 ipworksDhcpv4CountBOOTPReplies
|
Attribute |
Value |
|---|---|
|
Description |
Count of BOOTP replies sent by the server. If the server does not process BOOTP messages, this value will be zero. |
|
Condition |
Successful BOOTP reply by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.3 ipworksDhcpv4CountBOOTPTotal
|
Attribute |
Value |
|---|---|
|
Description |
Count of total BOOTP messages (BOOTP requests + BOOTP replies + unknown clients). |
|
Condition |
Upon receive of a BOOTP message. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.4 ipworksDhcpv4CountDHCPDiscovers
|
Attribute |
Value |
|---|---|
|
Description |
The number of DHCPDISCOVER messages received by the server. |
|
Condition |
Reception of a DHCPDISCOVER message by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.5 ipworksDhcpv4CountDHCPOffers
|
Attribute |
Value |
|---|---|
|
Description |
The number of DHCPOFFER messages sent by the server. |
|
Condition |
The counter is incremented for every DHCPOFFER message received by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.6 ipworksDhcpv4CountDHCPRequests
|
Attribute |
Value |
|---|---|
|
Description |
The number of DHCPREQUEST messages received by the server. |
|
Condition |
The counter is incremented whenever a DHCP server receives a DHCPREQUEST message. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.7 ipworksDhcpv4CountDHCPAcks
|
Attribute |
Value |
|---|---|
|
Description |
The number of DHCPACK messages sent by the server. |
|
Condition |
The counter is incremented for every DHCPACK message received by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.8 ipworksDhcpv4CountDHCPNacks
|
Attribute |
Value |
|---|---|
|
Description |
The number of DHCPNACK messages sent by the server. |
|
Condition |
The counter is incremented for every DHCPNACK message received by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.9 ipworksDhcpv4CountDHCPInforms
|
Attribute |
Value |
|---|---|
|
Description |
The number of DHCPINFORM messages received by the server. |
|
Condition |
The counter is incremented for every DHCPINFORM message received by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.10 ipworksDhcpv4CountDHCPDeclines
|
Attribute |
Value |
|---|---|
|
Description |
The number of DHCPDECLINE messages received by the server. |
|
Condition |
The counter is incremented for every DHCPDECLINE message received by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.11 ipworksDhcpv4CountDHCPReleases
|
Attribute |
Value |
|---|---|
|
Description |
The number of DHCPRELEASE messages received by the server. |
|
Condition |
The counter is incremented for every DHCPRELEASE message received by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.12 ipworksDhcpv4CountDHCPTotal
|
Attribute |
Value |
|---|---|
|
Description |
The number of total DHCP transactions (total of all DHCP message types + unknown + failures). |
|
Condition |
Every DHCP transaction. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.1.13 ipworksDhcpv4TransactionPerSecond
|
Attribute |
Value |
|---|---|
|
Description |
The number of successfully received DHCPv4 query per second. |
|
Condition |
The value is incremented for every successful processing of DHCPv4 query. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4MessageGroup |
9.2 DHCPv4FormatErrorGroup
This performance measurement group, called DHCPv4FormatErrorGroup, contains measurements for events which are related to the errors of DHCPv4 query. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4FormatErrorGroup
Most of the measurements (exclude ipworksDhcpv4UnknownMsgType and ipworksDhcpv4ParsingOption82Fail) are in a measurement collection job, the default PM job is DHCPv4DefaultPmJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DHCPv4DefaultPmJob
The default job with the default value is as follows:
PmJob=DHCPv4DefaultPmJob
compressionType=[] <empty>
currentJobState=[] <empty> <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DHCPv4DefaultPmJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=DHCPv4FormatErrorMr
measurementReaderId="DHCPv4FormatErrorMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4FormatErrorGroup"
measurementTypeRef=[] <empty>
|
ipworksDhcpv4UnknownMsgType and ipworksDhcpv4ParsingOption82Fail are in a threshold monitoring job, the default PM job is DHCPv4DefaultPmThresholdJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DHCPv4DefaultPmThresholdJob
The default job with the default value is as follows:
PmJob=DHCPv4DefaultPmThresholdJob
compressionType=[] <empty>
currentJobState=[] <empty> <read-only>
granularityPeriod=ONE_MIN
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=THRESHOLDJOB
pmJobId="DHCPv4DefaultPmThresholdJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=ParsingOption82FailMr
measurementReaderId="ParsingOption82FailMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_GP
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef=[] <empty>
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4FormatErrorGroup,MeasurementType=ipworksDhcpv4ParsingOption82Fail"
PmThresholdMonitoring=Option82ParsingFailureCrossThresholdMonitor
pmThresholdMonitoringId="Option82ParsingFailureCrossThresholdMonitor"
thresholdHigh=100
thresholdLow=80
thresholdSeverity=WARNING
MeasurementReader=UnknownMsgTypeMr
measurementReaderId="UnknownMsgTypeMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_GP
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef=[] <empty>
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4FormatErrorGroup,MeasurementType=ipworksDhcpv4UnknownMsgType"
PmThresholdMonitoring=UnknownMsgTypeMonitor
pmThresholdMonitoringId="UnknownMsgTypeMonitor"
thresholdHigh=100
thresholdLow=80
thresholdSeverity=WARNING
|
This performance measurement group includes following measurements:
- ipworksDhcpv4GarbledCHADDR
- ipworksDhcpv4ParsingOption82Fail
- ipworksDhcpv4UnknownHardware
- ipworksDhcpv4UnknownMsgType
9.2.1 ipworksDhcpv4GarbledCHADDR
|
Attribute |
Value |
|---|---|
|
Description |
The number of messages received by server with 'chaddr' field garbled (length does not match HLEN, for example). |
|
Condition |
The counter is incremented for every 'chaddr' field garbled (length does not match HLEN, for example). |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4FormatErrorGroup |
9.2.2 ipworksDhcpv4ParsingOption82Fail
|
Attribute |
Value |
|---|---|
|
Description |
The number of unknown option82 format message received by server. |
|
Condition |
The counter is incremented for every unknown option82 format message type received by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4FormatErrorGroup |
9.2.3 ipworksDhcpv4UnknownHardware
|
Attribute |
Value |
|---|---|
|
Description |
The number of messages received where HTYPE is not a type processed by the server or HTYPE does not match with HTYPE supported by server. |
|
Condition |
The counter is incremented for every message received for which HTYPE is not a type processed by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4FormatErrorGroup |
9.2.4 ipworksDhcpv4UnknownMsgType
|
Attribute |
Value |
|---|---|
|
Description |
The number of unknown message types received by server. |
|
Condition |
The counter is incremented for every unknown message type received by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4FormatErrorGroup |
9.3 DHCPv4DDNSMessageGroup
This performance measurement group, called DHCPv4DDNSMessageGroup, contains measurements for events which are related to DHCPv4 DDNS query. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4DDNSMessageGroup
Most of the measurements (exclude ipworksDhcpv4DDNSFailedError and ipworksDhcpv4DDNSRetryFail) are in a measurement collection job, the default PM job is DHCPv4DefaultPmJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DHCPv4DefaultPmJob
The default job with the default value is as follows:
PmJob=DHCPv4DefaultPmJob
compressionType=[] <empty>
currentJobState=[] <empty> <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DHCPv4DefaultPmJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=DHCPv4DDNSMessageMr
measurementReaderId="DHCPv4DDNSMessageMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4DDNSMessageGroup"
measurementTypeRef=[] <empty>
MeasurementReader=DHCPv4FormatErrorMr
measurementReaderId="DHCPv4FormatErrorMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4FormatErrorGroup"
measurementTypeRef=[] <empty>
|
ipworksDhcpv4DDNSFailedError and ipworksDhcpv4DDNSRetryFail are in a threshold monitoring job, the default PM job is DHCPv4DefaultPmThresholdJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DHCPv4DefaultPmThresholdJob
The default job with the default value is as follows:
PmJob=DHCPv4DefaultPmThresholdJob
compressionType=[] <empty>
currentJobState=[] <empty> <read-only>
granularityPeriod=ONE_MIN
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=THRESHOLDJOB
pmJobId="DHCPv4DefaultPmThresholdJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=DDNSFailedErrorMr
measurementReaderId="DDNSFailedErrorMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_GP
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef=[] <empty>
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4DDNSMessageGroup,MeasurementType=ipworksDhcpv4DDNSFailedError"
PmThresholdMonitoring=DDNSUpdateFailMonitor
pmThresholdMonitoringId="DDNSUpdateFailMonitor"
thresholdHigh=100
thresholdLow=80
thresholdSeverity=WARNING
MeasurementReader=DDNSRetryFailMr
measurementReaderId="DDNSRetryFailMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_GP
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef=[] <empty>
measurementTypeRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4DDNSMessageGroup,MeasurementType=ipworksDhcpv4DDNSRetryFail"
PmThresholdMonitoring=DDNSUpdateRetryMonitor
pmThresholdMonitoringId="DDNSUpdateRetryMonitor"
thresholdHigh=100
thresholdLow=80
thresholdSeverity=WARNING
|
This performance measurement group includes following measurements:
- ipworksDhcpv4DDNSRecv
- ipworksDhcpv4DDNSSent
- ipworksDhcpv4DDNSUpdateTotal
- ipworksDhcpv4DDNSFailedError
- ipworksDhcpv4DDNSRetryFail
- ipworksDhcpv4DDNSSuccess
9.3.1 ipworksDhcpv4DDNSRecv
|
Attribute |
Value |
|---|---|
|
Description |
The total number of DDNS update responses received by the DHCP server. This includes successes and failures. |
|
Condition |
The counter is incremented for every DDNS update response received by the DHCP server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4DDNSMessageGroup |
9.3.2 ipworksDhcpv4DDNSSent
|
Attribute |
Value |
|---|---|
|
Description |
The total number of DDNS update requests sent for A and PTR resources records. |
|
Condition |
The counter is incremented for every DDNS update request sent to DNS server for A and PTR resources records. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4DDNSMessageGroup |
9.3.3 ipworksDhcpv4DDNSUpdateTotal
|
Attribute |
Value |
|---|---|
|
Description |
The total number of DDNS update transactions sent and received while attempting to add and delete A and PTR resource records. |
|
Condition |
The counter is incremented for every of DDNS update transaction sent and received. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4DDNSMessageGroup |
9.3.4 ipworksDhcpv4DDNSFailedError
|
Attribute |
Value |
|---|---|
|
Description |
The total number of DDNS updates that failed. This includes A and PTR resources records. |
|
Condition |
The counter is incremented for every DDNS update request failure. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4DDNSMessageGroup |
9.3.5 ipworksDhcpv4DDNSRetryFail
|
Attribute |
Value |
|---|---|
|
Description |
The total number of DDNS updates that failed because it exceeded the maximum number of retries. This includes A and PTR resources records. |
|
Condition |
The counter is incremented for every DDNS retry failure. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4DDNSMessageGroup |
9.3.6 ipworksDhcpv4DDNSSuccess
|
Attribute |
Value |
|---|---|
|
Description |
The total number of successful ipworksDhcpv4DDNSRecv received by the server. This includes A and PTR resources records. |
|
Condition |
The counter is incremented for every successful ipworksDhcpv4DDNSRecv received by the server. |
|
Collection Method |
|
|
Aggregation |
SUM |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
DHCPv4DDNSMessageGroup |
9.4 DHCPv4LeaseInfoGroup
This performance measurement group, called DHCPv4LeaseInfoGroup, contains measurements for events which are related to DHCPv4 lease query. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4LeaseInfoGroup
The default PM job, which is a measurement collection job, is DHCPv4DefaultPmJob. The directory of this default job MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=DHCPv4DefaultPmJob
The default job with the default value is as follows:
PmJob=DHCPv4DefaultPmJob
compressionType=[] <empty>
currentJobState=[] <empty> <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="DHCPv4DefaultPmJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=DHCPv4LeaseInfoMr
measurementReaderId="DHCPv4LeaseInfoMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef="ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=DHCPv4LeaseInfoGroup"
measurementTypeRef=[] <empty>
This performance measurement group includes following measurements:
9.4.1 ipworksDhcpv4ActiveLeaseNum
|
Attribute |
Value |
|---|---|
|
Description |
The counter keeps the count for the number of active leases. |
|
Condition |
The counter is incremented for every new active lease and decremented for every active lease that becomes free. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
DHCPv4LeaseInfoGroup |
9.4.2 ipworksDhcpv4ActiveLeasePercentage
|
Attribute |
Value |
|---|---|
|
Description |
The counter keeps the percentage of active leases in the configured leases. |
|
Condition |
The counter is incremented for every increased percentage of active leases and decremented for every decreased percentage point active leases that becomes free. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
DHCPv4LeaseInfoGroup |
9.4.3 ipworksDhcpv4ConfiguredLeaseNum
|
Attribute |
Value |
|---|---|
|
Description |
The counter keeps the count for the number of configured leases. |
|
Condition |
The counter changes whenever the operator changes the pool configuration. |
|
Collection Method |
GAUGE |
|
Aggregation |
LAST_UPDATE |
|
Result Type |
Integer |
|
Application Level |
Cluster level |
|
Measurement Object Class |
DHCPv4LeaseInfoGroup |
10 Measurements for OS
This section provides the PM group and measurements regarding OS.
For the measurement CPULoad.Total under PM group OSProcessingUnit of OS, there are two PM jobs:
- Default measurement PM job OSDefaultPmJob
It is used to generate the PM report for CPULoad.Total.
- Default threshold PM job OSDefaultPmThresholdJob
It is used to raise and cease the System Load Threshold Reached, Load Average too High alarm:
- Raise the alarm when the value of CPULoad.Total is higher than the thresholdHigh.
- Cease the alarm when the value of CPULoad.Total is lower than the thresholdLow.
For the alarm detail, refer to the document System Load Threshold Reached, Load Average too High.
The directory of default PM job OSDefaultPmJob is:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=OSDefaultPmJob
The default PM job with the default value is as follows:
(PmJob=OSDefaultPmJob)>show -v all
PmJob=OSDefaultPmJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=FIFTEEN_MIN <default>
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=MEASUREMENTJOB <default>
pmJobId="OSDefaultPmJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=FIFTEEN_MIN <default>
requestedJobState=ACTIVE <default>
MeasurementReader=OSDefaultPmMr
measurementReaderId="OSDefaultPmMr"
moInstances=[] <empty>
thresholdDirection=[] <empty>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef=[] <empty>
measurementTypeRef="ManagedElement=1,SystemFunctions=1,Pm=1,
PmGroup=OSProcessingUnit,MeasurementType=CPULoad.Total"
The directory of the default threshold PM job OSDefaultPmThresholdJob is:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmJob=OSDefaultPmThresholdJob
The default threshold job with the default value is as follows:
(PmJob=OSDefaultPmThresholdJob)>show -v all
PmJob=OSDefaultPmThresholdJob
compressionType=[] <empty>
currentJobState=ACTIVE <read-only>
granularityPeriod=ONE_MIN
jobControl=FULL <default> <read-only>
jobGroup=[] <empty>
jobPriority=MEDIUM <default>
jobType=THRESHOLDJOB
pmJobId="OSDefaultPmThresholdJob"
reportContentGeneration=CHANGED_ONLY <default>
reportingPeriod=ONE_MIN
requestedJobState=ACTIVE <default>
MeasurementReader=OSDefaultPmThresholdMr
measurementReaderId="OSDefaultPmThresholdMr"
moInstances=[] <empty>
thresholdDirection=INCREASING <default>
thresholdRateOfVariation=PER_SECOND <default>
measurementReaderNameValue=[] <empty> <read-only>
measurementSpecification
groupRef=[] <empty>
measurementTypeRef="ManagedElement=1,SystemFunctions=1,Pm=1,
PmGroup=OSProcessingUnit,MeasurementType=CPULoad.Total"
PmThresholdMonitoring=CPULoadExceedThresholdMonitor
pmThresholdMonitoringId="CPULoadExceedThresholdMonitor"
thresholdHigh=80
thresholdLow=70
thresholdSeverity=CRITICAL
If you create a new customized threshold PM job for CPULoad.Total, the following procedures must be done:
- List the LDE PMCounter producers.
# amf-find su | grep PMCounter
safSu=SC-1,safSg=NWA,safApp=ERIC-ldews.pmcounters.sc safSu=SC-2,safSg=NWA,safApp=ERIC-ldews.pmcounters.sc safSu=PL-3,safSg=NWA,safApp=ERIC-ldews.pmcounters.pl safSu=PL-4,safSg=NWA,safApp=ERIC-ldews.pmcounters.pl
- Restart the LDE PMCounter producers for each node (including
both SCs and PLs). Take the ones on PL-3 as an example:
amf-adm lock safSu=PL-3,safSg=NWA,safApp=ERIC-ldews.pmcounters.pl amf-adm lock-in safSu=PL-3,safSg=NWA,safApp=ERIC-ldews.pmcounters.pl amf-adm unlock-in safSu=PL-3,safSg=NWA,safApp=ERIC-ldews.pmcounters.pl amf-adm unlock safSu=PL-3,safSg=NWA,safApp=ERIC-ldews.pmcounters.pl
10.1 OSProcessingUnit
This PM group, called OSProcessingUnit, contains the measurements of events which are related to OS level. The directory of the MO is as follows:
ManagedElement=<Node Name>,SystemFunctions=1,Pm=1,PmGroup=OSProcessingUnit
This PM group includes OS related measurements. For more detail, refer to LDE PM Counters Interface. IPWorks only uses the measurement CPULoad.Total.
10.1.1 CPULoad.Total
|
Attribute |
Value |
|---|---|
|
Description |
Total CPU usage (percentage) |
|
Computed as User + System + IOWait + Nice + IRQ + SoftIRQ. | |
|
Condition |
|
|
Collection Method |
Gauge |
|
Aggregation |
AVG |
|
Result Type |
Integer |
|
Application Level |
Node level |
|
Measurement Object Class |
OSProcessingUnit |
Reference List
| Ericsson Documents |
|---|
| [1] IPWorks Performance Measurements. |
| [2] ENUM, Total Query Failure Error. |
| [3] ENUM, Query Failure Error. |
| [4] ENUM, Total Query Failure Error. |
| [5] ERH, TPS Exceed Threshold. |
| [6] ERH, NP Query Error. |
| [7] ERH, Toll-free Query Error. |
| [8] ERH, Total Query Error. |
| [9] System Load Threshold Reached, Load Average too High. |
| [10] LDE PM Counters Interface, 1/155 19-CAA 901 2978/4 Uen |