|$|
|$|
|Introduction|Purpose|Test Result Summary|$|1|1.1|2|
|Introduction|Target Audience|Required Competence|Hardening Checklists|Assess Hardening Activities|Perform Hardening Activities|Reference List|$|1|1.1|1.2|2|2.1|2.2|3|
|Introduction|Concepts|Prerequisites|Procedure|Identify Switch and Switch Status|Log on to the Selected Switch|Set Switch to Maintenance Mode|Select Download Partition|Install EXOS Core Image|Install Modular Software Package|Use the Newly Installed Partition|Reboot and Activate the New Packages|Check the Status of the Upgraded Switch|Recover Traffic Switch from vCIC|Log Out of the Switch|Reference List|$|1|1.1|1.2|2|2.1|2.2|2.3|2.4|2.5|2.6|2.7|2.8|2.9|2.10|2.11|3|
|Introduction|Prerequisites|General Prerequisites|HW-Specific Prerequisites|Installation Flow for Multi-Server Deployments|Multi-Server CEE Installation on BSP Hardware|Multi-Server CEE Installation on Dell Hardware|Multi-Server CEE Installation on HDS vPOD|Installation Flow for Single Server Deployments|Single Server CEE Installation on Dell Hardware|Post-Installation Activities|Reference List|$|1|1.1|1.2|1.3|2|2.1|2.2|2.3|3|3.1|4|5|
|Introduction|Prerequisites|Configuration of Dell PowerEdge R630 Server|Configure Dell iDRAC|Configure Dell RAID Setup|Enable PXE Boot on Control Network Domain NICs|Reference List|$|1|1.1|2|2.1|2.2|2.3|3|
|Introduction|Prerequisites|Documents|Hardware and Software Required|Installation Data|Network Configuration|Control Network Configuration for CEE vPOD|Agent Network for CEE vPOD|Configuration of CEE Control Networks Using CCM|Data Network Configuration for CEE vPOD for CEE without SDN|Create HDS L2 GWs|Configure L2 Networks|Create HDS L2 GW Interfaces for L2 Networks|Data Network Configuration for CEE vPOD with Tightly Integrated SDN|Create HDS L2 GWs|Configure L2 Networks|Create HDS L2 GW Interfaces for L2 Networks|Fuel Host Preparation|Install Ubuntu Host|Establish Fuel Host Server Connectivity|Install Dependent Packages|Fuel Installation|Connect Fuel Host to CCM|CEE Deployment|Temporary pre-Installation Steps|CEE Installation Fails If a GRE Tunnel ID or VXLAN VNI Above 65535 Is Used|Audit Log Contains Several Unfiltered CM-HA Related Events|Creation of OVSDB Interface|NIC Firmware Version Check and Upgrade|CEE Installation|Temporary Installation Steps|Deployment Can Fail If Data PCI Slot For Blades Cannot Be Read|Temporary post-Installation Steps|ml2_conf_sriov.ini Not Properly Populated After CEE 6.6 Installation on HDS|Configuration of OVSDB Interface for HW-VTEP Access|vFuel Migration into the CEE Region|Region Expansion|Concluding Steps|CA and NBI Certificates for Secure HTTPS Access|Reference List|$|1|1.1|1.1.1|1.1.2|1.1.3|2|2.1|2.1.1|2.1.2|2.2|2.2.1|2.2.2|2.2.3|2.3|2.3.1|2.3.2|2.3.3|3|3.1|3.2|3.3|4|4.1|5|5.1|5.1.1|5.1.2|5.2|5.3|5.4|5.5|5.5.1|5.6|5.6.1|5.7|5.8|5.9|6|7|8|
|$|
|Introduction|Prerequisites|Prepare to Configure Extreme X670V Switches|Configuration of Extreme X670V Switches|Configuration of Traffic Switch|Configuration of Storage Switch|Reference List|$|1|1.1|2|3|3.1|3.2|4|
|Introduction|Prerequisites|Scope|Limitations|Preparing to Install Atlas|Install Atlas|Post-Installation Activities|Verify Installation|Change Password for Atlas Users|Recommendations for Installing Atlas on non-CEE System|Reference List|$|1|1.1|1.2|1.3|2|3|4|4.1|4.2|5|6|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|$|1|1.1|1.2|2|2.1|
|Introduction|Description|Prerequisites|Procedure|Disable vFuel|Enable vFuel|$|1|1.1|1.2|2|2.1|2.2|
|Introduction|Description|Prerequisites|Procedure Overview|Preparation|Check Available Capacity on ScaleIO|Check the OpenStack Quotas|Activate the Storage on ScaleIO for Swift|Conclude Activation|Additional Information|List vCIC, Compute and ScaleIO Nodes|Identify Master MDM|Configurable Storage Connector Parameters|Reference List|$|1|1.1|1.2|1.3|2|3|4|5|6|7|7.1|7.2|7.3|8|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Reference List|$|1|1.1|1.2|2|2.1|3|
|Introduction|Alarm Description|Prerequisites|Documents|Tools|Conditions|Procedure|Severity MINOR|Severity MAJOR and CRITICAL|Procedure for Compute Nodes|Procedure for vCIC Nodes|Checking CPU Load and Utilization|Zabbix Monitoring Tool|Performance Management Northbound API|$|1|1.1|1.2|1.2.1|1.2.2|1.2.3|2|2.1|2.2|2.2.1|2.2.2|3|3.1|3.2|
|Introduction|Alarm Description|Prerequisites|Procedure|Analyzing the Alarm|Troubleshooting the Server|Troubleshooting the Switch|$|1|1.1|1.2|2|2.1|2.2|2.3|
|Introduction|Prerequisites|Preparing to Upgrade Atlas SW|Upgrade Atlas SW|Post-Upgrade Activities|Verify Installation|SSL Certificate Installation|Change Password for Atlas Users|Rollback|$|1|1.1|2|3|4|4.1|4.2|4.3|5|
|Introduction|Alert Description|Prerequisites|Procedure|Actions|$|1|1.1|1.2|2|2.1|
|Introduction|Alarm Description|Prerequisites|Procedure|Install NeLS Server|Solve Network Issues|Install TLS Certificate|Replace Expired TLS Certificate|Post Actions|Reference List|$|1|1.1|1.2|2|2.1|2.2|2.3|2.4|2.5|3|
|Introduction|Alert Description|Prerequisites|Procedure|Analysis|Actions|Additional Information|$|1|1.1|1.2|2|2.1|2.2|3|
|Introduction|API Version|Document References|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Ericsson Extensions|Limitations and Recommendations|Limitations|Recommendations|Reference List|$|1|1.1|1.2|2|2.1|2.2|3|4|4.1|4.2|5|
|Introduction|API Version|Document References|API Design Base Reference|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Ericsson Extended Functions|forcemove|API Operation|VM Migration and Evacuation|Scheduling|Hints for VM Affinity and Antiaffinity|redefine|API Operation|PCI Passthrough and SR-IOV Physical Function Passthrough Use in OpenStack|Nova Flavor Creation for PCI Passthrough Ports and SR-IOV Physical Function Passthrough Ports|Bandwidth Based Scheduling|API Operation|VMs with and without Bandwidth Requirements|Limitations|Limitations for Multi-Server Deployment|Limitations for Single Server Deployment|Additional Information|Host Aggregates in CEE|Removal of Host from Host Aggregate|Libvirt Real Time Instances|$|1|1.1|1.2|1.2.1|2|2.1|2.2|3|3.1|3.1.1|3.1.2|3.1.3|3.1.4|3.2|3.2.1|3.3|3.3.1|3.4|3.4.1|3.4.2|4|4.1|4.2|5|5.1|5.1.1|5.2|
|Introduction|API Versions|Document References|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Ericsson Extensions|Limitations and Recommendations|General Limitations|Limitations with EMC ScaleIO|Recommendations|Additional Information|General Information|EMC ScaleIO-specific Information|$|1|1.1|1.2|2|2.1|2.2|3|4|4.1|4.2|4.3|5|5.1|5.2|
|Scope|General|Description|Protocol Versions|Message and Signal Definition|Logging in CEE|Connecting to syslog Service|Log Filtering|Log Files Written by rsyslog|Log Rotation|Remote Logging|Audit Logging|SBI and SIEM Configuration|Functions and Procedure Declaration|Constants Declarations|Reference List|$|1|2|3|3.1|4|5|5.1|5.2|5.3|5.4|5.5|5.6|5.7|6|7|8|
|Introduction|API Version|Document References|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Heat Plugins|Ericsson::Heat::DelayPolicy|Ericsson::Neutron::Port|Ericsson::Neutron::RouterInterface|Limitations and Recommendations|Limitations|Recommendations|$|1|1.1|1.2|2|2.1|2.2|3|3.1|3.2|3.3|4|4.1|4.2|
|$|
|Introduction|Scope|Architectural Overview|MDM Cluster|SDS|SDC|ScaleIO GW|LIA|ScaleIO System Logical Structure|Protection Domain|Storage Pool|Fault Set|ScaleIO Networking|Frontend Storage Network|Backend Storage Network|Management Networks|Network Configuration Requirements|Security|Fault Management|ScaleIO GUI|Logging|Maintenance|Upgrade Process|$|1|1.1|2|2.1|2.2|2.3|2.4|2.5|3|3.1|3.2|3.3|4|4.1|4.2|4.3|4.4|5|6|7|8|9|10|
|Introduction|Overview|Atlas Deployments|Orchestration|Workflow|Atlas Document Overview|Reference List|$|1|2|2.1|3|4|5|6|
|Introduction|Scope|Overview|Backup and Restore Solutions|CIC Domain Data Backup and Restore|Atlas Backup and Restore|Fuel Synchronization|Disaster Recovery|Exporting Fuel VM Image|Exporting CIC VM Images|Backup Contents|CIC Domain Data|Atlas|Fuel|Disaster Recovery|Backup Location|CIC Domain Data|Atlas|Fuel|Disaster Recovery|Retention Policy|CIC Domain Data|Atlas|Disaster Recovery|Backup Sizes|Procedure Durations|Transfer Durations|Storage Requirements|Storage Volume|Accessible Storage|Bandwidth|Security Policy|Transferring Backups Using FTPS|Remote FTPS Server for Storing Backups|Procedures|Backup Strategy|Recommended Failover Strategy for Fuel|$|1|1.1|1.2|2|2.1|2.2|2.3|2.4|2.5|2.6|3|3.1|3.2|3.3|3.4|4|4.1|4.2|4.3|4.4|5|5.1|5.2|5.3|6|7|7.1|8|8.1|8.2|8.3|8.4|9|9.1|9.2|10|10.1|
|Introduction|Product Numbers|Library Distribution and Access|Library Access|Library Structure|Document Types|Related Information|Cloud Execution Environment Library|Safety and Environment|Library Overview|Product Overview|Planning|Installation|Initial Configuration|Operation and Maintenance|Emergency|Interface|$|1|1.1|1.2|1.3|1.4|1.5|1.6|2|2.1|2.2|2.3|2.4|2.5|2.6|2.7|2.8|2.9|
|$|
|$|
|Overview|Description|Prerequisites|REST Interface|Get the Existing Configuration for SNMP Trap Destinations|Add New SNMP Trap Destination Configuration|Remove an Existing SNMP Trap Destination Configuration|Watchmen CLI|Syntax|Subcommands|SNMP Trap Destination|Syntax|Examples|$|1|1.1|1.2|2|2.1|2.2|2.3|3|3.1|3.2|4|4.1|4.2|
|Introduction|Security Protocols, Algorithms, and Interfaces|Interfaces|Algorithms|Protocols and Encryption|Identity and Access Management|Main User Types|Cloud Infrastructure Administrators|Local Administrators|Manage OpenStack Cloud Users|ScaleIO User Management|BSP User Management|NeLS User Management|LDAP Groups|Passwords|Change Password for root|Change Credentials for Predefined Users|Change Password for OpenStack Administrator|Change Password for CSC Administrator|Distribute SSH-keys for Personal Accounts|Password Policies|Privileged Access|Security and Audit Trail Logging|Logging Service Architecture|Log Types|Configure SIEM|Network Security|Transport Layer Security|Vulnerability Management|Privacy|Services, Ports, and Protocols|Example Configuration for IdAM|Command Descriptions|passwd|idamsetup|Reference List|$|1|2|2.1|2.2|2.3|3|3.1|3.1.1|3.1.2|3.1.3|3.1.4|3.1.5|3.1.6|3.2|3.3|3.3.1|3.3.2|3.3.3|3.3.4|3.3.5|3.4|3.5|4|4.1|4.2|4.3|5|6|7|8|9|10|11|11.1|11.2|12|
|Introduction|Limitations|Terms|GUI Description|Change Password|Manage Applications in Catalog|Upload Application|Show Application Overview|Show Application Template|Update Application|Edit Application Template|Delete Application|Launch Stack From Catalog Page|Export Application|Manage Stacks|Launch Stacks|Scale out Stack|Scale in Stack|Manage Workflow in Mistral|Create Workbook|Create Workflow|Start Execution|Create Cronjob|Task Result|Delete Workflow|Delete Cron Trigger|Delete Execution|Deployment Wizard from UI|Stack Topology|Navigation|Icons|Edges and Connections|Hierarchy|Labels|NUMA/CPU Pinning|Topology Search|Stack Overview|Stack Resource Summary|Stack Information|Stack Parameters|Launch Parameters|Outputs|Activity Summary|Most Recent Events|Stack Resources|Stack Events|Event Summary|Events|Atlas Help Center|Fault Management|User Guides|Atlas Product Information|Reference List|$|1|1.1|2|3|4|5|5.1|5.2|5.3|5.4|5.5|5.6|5.7|5.8|6|6.1|6.2|6.3|7|7.1|7.2|7.3|7.4|7.5|7.6|7.7|7.8|8|9|9.1|9.2|9.3|9.4|9.5|9.6|9.7|10|10.1|10.2|10.3|10.4|10.5|10.6|10.7|11|12|12.1|12.2|13|13.1|13.2|13.3|14|
|Introduction|CPI Library Types|Document Formats|Active Library Explorer Variants|Active Library Explorer Functions|Active Library Explorer Window|Frames|Library Collections|Active Library Explorer Toolbar|Context Menu|Basic Functions|Back and Forward|Search|Document View Search Syntax|Instant Document Search|Advanced Search Options|Search Library Collections|Change Sort Order|Show All Titles and Show Context|Next Search Hit|Search in Document Frame|PDF and Excel Document Searches|Navigation|Library Front Page Images|Filter Displayed Contents|Set Filters|Hide Filter Library Contents|Reset Filters|Add Bookmarks|Copy Links to Clipboard|Copy Links to Clipboard in Microsoft Internet Explorer|Copy Links to Clipboard in Other Web Browser|Create and Display Annotations|Provide Feedback|Add Note|Edit Note|Delete Note|Print|Save Document to Local Disk|View PDF Version of Current Document|Open a Document in Separate Window|Get Help|Find Active Library Explorer Version|Active Library Explorer Server|Active Library Explorer for Windows|Download Latest Active Library Explorer Version|Access Active Library Explorer Libraries Using URL Hyperlinks|Internet Address and Parameters|Open Libraries|Search for Documents|$|1|1.1|1.2|1.3|1.4|2|2.1|2.2|2.3|2.4|3|3.1|3.2|3.2.1|3.2.2|3.2.3|3.2.4|3.2.5|3.2.6|3.2.7|3.2.8|3.2.9|3.3|3.4|3.5|3.5.1|3.5.2|3.5.3|3.6|3.7|3.7.1|3.7.2|3.8|3.9|3.9.1|3.9.2|3.9.3|3.10|3.11|3.12|3.13|4|5|5.1|5.2|5.3|6|6.1|6.2|6.3|
|Introduction|Scope|Prerequisites|Node Names|Login Credentials|Operations|Create a Backup|List Backups|Show the Contents of Backups|Show the History of All Backups|Show the Log File|Show the Retention Policy|Change the Retention Policy|Check Consistency, Clean, and Synchronize Backups|Show All Available Parameters|Cleanup of Aborted or Failed Backups|Troubleshooting|$|1|1.1|2|2.1|2.2|3|3.1|3.2|3.3|3.4|3.5|3.6|3.7|3.8|3.9|4|5|
|$|
|Introduction|Scope|Prerequisites|ACDC.py|ceescalein|cic-data-backup|changePolicy|clean|create|help|list|show|showHistory|showLog|showPolicy|pre-cic-data-restore|cic-data-restore|expandcee|healthcheck.py|neutron|device|deviceport|host|port-create|staticroute|nova|forcemove|redefine|watchmen-client|active-alarm-list|alarm-history|snmp-trap-config-add|snmp-trap-config-list|snmp-trap-config-remove|Reference List|$|1|1.1|1.2|2|3|4|4.1|4.2|4.3|4.4|4.5|4.6|4.7|4.8|4.9|5|6|7|8|9|9.1|9.2|9.3|9.4|9.5|10|10.1|10.2|11|11.1|11.2|11.3|11.4|11.5|12|
|Introduction|Scope|Intended Audience|Prerequisites|Test Cases|Health Check|Reboot vFuel|Reboot vCIC in Single Server Deployment|Reboot Region Switch in Single Server Deployment|Reboot Single Server Host with VM Configured|Backup and Restore Atlas in Single Server Deployment|Reboot Compute Host and Recover vFuel|Reboot Compute Host and Recover vCIC|Reboot vCIC Host with Master RabbitMQ Node|Reboot Region Switch in Multi-Server Deployment|Lock or Unlock Switch Blade in Given BSP Slot|Restart Host Where Atlas Executes|Reboot vCIC in Multi-Server Deployment|Reboot Whole vCIC Cluster|Restart Atlas VM|Reboot VM, Soft|Reboot VM, Hard|VM Stop and VM Start|Backup and Restore Atlas in Multi-Server Deployment|Migrate VM with nova migrate Command|Migrate VM to Unspecified Host Using nova forcemove Command|Verify That Migrated vFuel VMs Are Synchronized after CEE Deployment|Verify That Manual vFuel Handover Is Successful|Verify vFuel Image Synchronization Instructions|Verify Rollback to Previous (Passive) vFuel Version|End-to-End Connectivity with CSS|End-to-End Connectivity with SR-IOV|End-to-End Connectivity with PCI PT|Verify IPv6 Address as Allowed Address Pair|Verify IPv6 Ingress Rules|Verify Software RAID Configuration|Check Scale-In Functionality on Compute Hosting vFuel|Check Scale-In Functionality on Compute Hosting vCIC|$|1|1.1|1.2|1.3|2|2.1|2.2|2.3|2.4|2.5|2.6|2.7|2.8|2.9|2.10|2.11|2.12|2.13|2.14|2.15|2.16|2.17|2.18|2.19|2.20|2.21|2.22|2.23|2.24|2.25|2.26|2.27|2.28|2.29|2.30|2.31|2.32|2.33|
|Introduction|API Version|Document References|Prerequisites|CEE Networking Configurations|Segmentation IDs|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Deviations|Partly Supported Operations|Added Operations|Operations Not Available in CEE|Ericsson Extensions|Trunkport Extension|Limitations and Recommendations|Limitations|Recommendations|Concepts and Use Cases|General Terms|IP Address Management|MAC Address Management|Internal Neutron Network without Neutron IP Address Management|Internal Neutron Network with Neutron IP Address Management|Networks for CEE Region External Connectivity|$|1|1.1|1.2|2|2.1|2.2|3|3.1|3.2|4|4.1|4.2|4.3|5|5.1|6|6.1|6.2|7|7.1|7.2|7.3|7.4|7.5|7.6|
|Introduction|Target Groups|Prerequisites|Risks|Limitations|Configure with Local Authentication|Configure with Centralized Authentication|Register Endpoints|Change Keystone Information for All Services|Edit Configuration Files on vCIC Host|Edit Configuration Files on Compute Host|Edit Configuration Files on Atlas|Post-Configuration Activities|$|1|1.1|1.2|1.3|1.4|2|3|3.1|3.2|3.2.1|3.2.2|3.2.3|3.3|
|Introduction|Scope|Target Group|Prerequisites|Limitations|Overview|Component Update Descriptions|Procedure Durations|Update Orchestration Configuration File|Procedure|Mandatory Preparation Stage|Update Stage|Common Concluding Stage|Error Handling|Error Handling for Failed CSC Update|Error Handling for Failed Orchestrated Update|Error Handling for Failed Atlas Upgrade|Additional Operations|Checking Update State|Checking VM State|Listing Nodes|Identifying the Active and Cold Standby Fuel Hosts|Insert Forwarding Rule on vCICs|Generating New SSH Key for Compute Host Hosting vCIC or vFuel|update_groups.yaml Examples|NIC Firmware Version Check and Upgrade|Reference List|$|1|1.1|1.2|1.3|1.4|2|2.1|2.2|3|4|4.1|4.2|4.3|5|5.1|5.2|5.3|6|6.1|6.2|6.3|6.4|6.5|6.6|7|8|9|
|Introduction|Scope|Target Group|Prerequisites|Limitations|Overview|Component Update Descriptions|Procedure Durations|Update Orchestration Configuration File|Procedure|Mandatory Preparation Stage|Update Stage|Common Concluding Stage|Error Handling|Error Handling for Failed CSC Update|Error Handling for Failed Orchestrated Update|Error Handling for Failed Atlas Upgrade|Additional Operations|Checking Update State|Checking VM State|Listing Nodes|Identifying the Active and Cold Standby Fuel Hosts|Insert Forwarding Rule on vCICs|Generating New SSH Key for Compute Host Hosting vCIC or vFuel|update_groups.yaml Examples|NIC Firmware Version Check and Upgrade|Reference List|$|1|1.1|1.2|1.3|1.4|2|2.1|2.2|3|4|4.1|4.2|4.3|5|5.1|5.2|5.3|6|6.1|6.2|6.3|6.4|6.5|6.6|7|8|9|
|Introduction|Description of Changes|New and Changed Documents|Library Overview|Product Overview|Planning|Installation|Initial Configuration|Operation and Maintenance|Interface|Removed Documents|$|1|2|2.1|2.1.1|2.1.2|2.1.3|2.1.4|2.1.5|2.1.6|2.1.7|2.2|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Additional Information|$|1|1.1|1.2|2|2.1|3|
|Introduction|API Version|Document References|Prerequisites|CEE Networking Configurations|Segmentation IDs|Topology Database|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Deviations|Partly Supported Operations|Changed Operations|Added Operations|Operations Not Available in CEE|Ericsson Extensions|Neutron Router active_device Extension|StaticRoute Extension|Trunkport Extension|Topology Extension|Limitations and Recommendations|Limitations|Recommendations|Concepts and Use Cases|General Terms|IP Address Management|MAC Address Management|Internal Neutron Network without Neutron IP Address Management|Internal Neutron Network with Neutron IP Address Management|External Connectivity Guidelines for Deployments with Extreme Switches|$|1|1.1|1.2|2|2.1|2.2|2.3|3|3.1|3.2|4|4.1|4.2|4.3|4.4|5|5.1|5.2|5.3|5.4|6|6.1|6.2|7|7.1|7.2|7.3|7.4|7.5|7.6|
|Introduction|cApp Create|Create a cApp|Create a cApp with All Option Fields|cApp Delete|cApp Update|cApp Show|cApp Show Template|List Available cApps|List Files for a cApp|Update File Content|Show File Content|cApp Export|Application Scaling|Stack Scale Out|Stack Scale In|Stack Scaling List|cApp Personalize|Adding Properties From CLI|cApp Personalize for Editing the Main Template|$|1|2|2.1|2.2|3|4|5|6|7|8|9|10|11|12|12.1|12.2|12.3|13|13.1|13.2|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|$|1|1.1|1.2|2|2.1|
|Introduction|Alert Description|Prerequisites|Procedure|Actions|Additional Information|$|1|1.1|1.2|2|2.1|3|
|Introduction|API Version|Document References|Prerequisites|CEE Networking Configurations|Segmentation IDs|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Deviations|Partly Supported Operations|Operations Not Available in CEE|Limitations and Recommendations|Limitations|Recommendations|Concepts and Use Cases|General Terms|IP Address Management|MAC Address Management|Internal Neutron Network without Neutron IP Address Management|Internal Neutron Network with Neutron IP Address Management|External Connectivity Guidelines for Single Server Deployments|$|1|1.1|1.2|2|2.1|2.2|3|3.1|3.2|4|4.1|4.2|5|5.1|5.2|6|6.1|6.2|6.3|6.4|6.5|6.6|
|Introduction|Hazard Symbols and Admonitions|General Safety Precautions|Electric Shock Hazards|Safety Precautions for Working with Electrical Equipment|Energy Hazards|Fire Hazard|Fire Precautions|Heat Hazards|Mechanical Hazards|Radio Frequency Exposure Hazards|Laser Hazards|Chemical Hazards|Beryllium Oxide Hazard|Battery Acid Hazard|Gas Explosion Hazard|Refrigerant Hazard|Other Hazards|Handling Heavy Goods|Working at Height|$|1|2|3|4|4.1|5|6|6.1|7|8|9|10|11|11.1|11.2|11.3|11.4|12|12.1|12.2|
|Introduction|Target Group|Educational Requirements|Admonitions and Safety Symbols|Special Hazard Symbols|Batteries|Overheated Batteries|Treating Hazardous Waste from Leaks|Electrical Installation|Safety Precautions for Working with Electrical Installations|Electrostatic Discharge|Handling Printed Board Assemblies and IC Components|Storing and Transporting Printed Board Assemblies and IC Components|Equipment Handling|Ground Connection|Lightning Protection|System, Data, and Traffic Protection|$|1|1.1|1.2|2|2.1|3|3.1|3.2|4|4.1|5|5.1|5.2|6|7|8|9|
|Introduction|Alert Description|Prerequisites|Procedure|Actions|$|1|1.1|1.2|2|2.1|
|Introduction|API Version|Document References|Prerequisites|CEE Networking Configurations|Segmentation IDs|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Deviations|Partly Supported Operations|Added Operations|Operations Not Available in CEE|Ericsson Extensions|Trunkport Extension|Limitations and Recommendations|Limitations|Recommendations|Concepts and Use Cases|General Terms|IP Address Management|MAC Address Management|Internal Neutron Network without Neutron IP Address Management|Internal Neutron Network with Neutron IP Address Management|Networks to CMX VRs|External Connectivity Guidelines for BSP Deployments|Reference List|$|1|1.1|1.2|2|2.1|2.2|3|3.1|3.2|4|4.1|4.2|4.3|5|5.1|6|6.1|6.2|7|7.1|7.2|7.3|7.4|7.5|7.6|7.7|8|
|Introduction|Alert Description|Prerequisites|Procedure|Actions|$|1|1.1|1.2|2|2.1|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Additional Information|Workaround for CPU Pinning Overlap|Cease the Alarm Manually|$|1|1.1|1.2|2|2.1|3|3.1|3.2|
|Introduction|Purpose|Target Groups|Prerequisites|Documents|Tools and Equipment|User Access|Configuration Data|Conditions|Tasks|Synchronize the Active Fuel VM to the Cold Standby (Backup and Restore)|Failover to the Cold Standby Fuel VM (Recover from Failure)|Recreate Fuel VM on Repaired Host|Operations|Log on to one of the vCICs|Log on to Fuel|Check Fuel Application Sanity|Check Fuel Tasks in Progress|Check Nodes Under Provision|Find Active and Standby Fuel VMs|Find Active and Standby Fuel Hosts|Store IP addresses on the vCIC as Environment Variables|Shut Down the Fuel VM|Copy the Fuel VM Image|Start the Copied Fuel VM|Check Fuel States|Start up the Fuel VM|Create virsh Domain for Fuel VM on the Repaired Host|$|1|1.1|1.2|1.3|1.3.1|1.3.2|1.3.3|1.3.4|1.3.5|2|2.1|2.2|2.3|3|3.1|3.2|3.3|3.4|3.5|3.6|3.7|3.8|3.9|3.10|3.11|3.12|3.13|3.14|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Additional Information|$|1|1.1|1.2|2|2.1|3|
|Introduction|Text|Academic Free License|AGPLv3|Apache|Apache License Version 2.0 (ASL 2.0)|Artistic|Beerware|Boost|BSD|BSD with advertising|BSD-2-Clause|BSD-3-Clause|Copyright Joyent|Copyright Only|ERPL|GFDL 1.3|GNU Library General Public License, version 2.0 (LGLP-2.0)|GPL+|GPL 1.0|GPL-2.0|GPL-2.0+|GPL 2+ with exceptions|GPL-3.0|GPL-3.0+|ISC|LGPL-2.0+|GNU Lesser General Public License, version 2.1 (LGPL-2.1)|LGPL-3.0|LGPL-3.0+|MIT|MIT Public Domain|MPLv1.1|OFL|OpenLDAP|Open Market License (OML)|PostgreSQL|Python|Ruby|SISSL|UCD|Unicode|Wxwidgets|Zlib|ZPL2.0|ZPL2.1|Reference List|$|1|2|2.1|2.2|2.3|2.4|2.5|2.6|2.7|2.8|2.9|2.10|2.11|2.12|2.13|2.14|2.15|2.16|2.17|2.18|2.19|2.20|2.21|2.22|2.23|2.24|2.25|2.26|2.27|2.28|2.29|2.30|2.31|2.32|2.33|2.34|2.35|2.36|2.37|2.38|2.39|2.40|2.41|2.42|2.43|2.44|3|
|Introduction|Purpose|General Impact|Capacity and Performance|Hardware|Implementation|Interface|Operation|New Features|Deprecated Features|Obsolete Features|Other Network Elements|Other Impacts|Summary of Impacts|Impact on CEE Features|OpenStack Mitaka|Cloud SDN Switch|SDN Tight Integration|Small Footprint Deployment|Single Server Deployment|Secure TLS Communication|Distributed Block Storage|ScaleIO as CEE-External Software Defined Block Storage|Swift on ScaleIO|SR-IOV|Bandwidth Management|Backup and Restore|VLAN Restore in CEE on BSP|Resource Management for Virtual Machines|CEE Reference Configurations|Equipment Management|Centralized Identity Management|Ericsson Neutron|Continuous Monitoring High Availability (CM-HA)|Performance Management|Fault Management|Upgrade And Rollback|Security and Audit Trail Logging|IPv6 Support for Dedicated Neutron APIs|IPv6 Basic Address Configuration: Manual Configuration and SLAAC|PCI Passthrough Support|L3 Fabric Support|Skylake Support|Support for Fortville NICs 10/25/40G|Multi-Server Host Network Configuration without Storage Switching Domain|Software RAID|Glance Image Transfer Traffic on Storage Switching Domain|Region Scale-in|Cinder Backup in CEE|License Management|Automated Health Check|Automated Data Collection|Ericsson Atlas|OpenStack Newton|OVFT|Application Template Export|Multi-Region Dashboard and Placement Zones|On-Demand Application Scaling|TOSCA Support|Mistral Support Deployment|Deployment Wizard|Enhanced Stack Panels|Atlas Backup|Atlas UI Plugins|Support for Multiple HOT Templates|Reference List|$|1|1.1|2|2.1|2.2|2.3|2.4|2.5|2.6|2.7|2.8|2.9|2.10|3|4|4.1|4.2|4.3|4.4|4.5|4.6|4.7|4.8|4.9|4.10|4.11|4.12|4.13|4.14|4.15|4.16|4.17|4.18|4.19|4.20|4.21|4.22|4.23|4.24|4.25|4.26|4.27|4.28|4.29|4.30|4.31|4.32|4.33|4.34|4.35|4.36|4.37|5|5.1|5.2|5.3|5.4|5.5|5.6|5.7|5.8|5.9|5.10|5.11|5.12|6|
|Introduction|Scope|Prerequisites|Documents|Tools|Conditions|Procedure|Boot Mode|System Time and System Date|$|1|1.1|1.2|1.2.1|1.2.2|1.2.3|2|2.1|2.2|
|Introduction|Prerequisites|Prepare to Configure Extreme X770 Switches|Configuration of Extreme X770 Switches|Configuration of Traffic Switch|Configuration of Storage Switch|Reference List|$|1|1.1|2|3|3.1|3.2|4|
|Introduction|Description|Prerequisites|Procedure Overview|Preparation|Check Available Capacity on ScaleIO|Check the OpenStack Quotas|Expand the Storage on ScaleIO for Swift|Concluding Expansion|Additional Information|List vCIC, Compute and ScaleIO Nodes|Identify Master MDM|Swift Store on ScaleIO Feature Check|Configurable Storage Connector Parameters|Reference List|$|1|1.1|1.2|1.3|2|3|4|5|6|7|7.1|7.2|7.3|7.4|8|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Reference List|$|1|1.1|1.2|2|2.1|3|
|Introduction|Alarm Description|Prerequisites|Procedure|Severity MINOR|Severity MAJOR and CRITICAL|$|1|1.1|1.2|2|2.1|2.2|
|Introduction|Alarm Description|Prerequisites|Procedure|Analyzing the Alarm|Actions|Additional Information|$|1|1.1|1.2|2|2.1|2.2|3|
|Introduction|Alarm Description|Prerequisites|Procedure|Replace NBI Certificate on vCIC|Replace NBI Certificate on Atlas|Replace CA Certificate on Atlas|Replace CA and NBI Certificates on vCIC|Replace CA and Client NeLS Certificates|Post Actions|Additional Information|Reference List|$|1|1.1|1.2|2|2.1|2.2|2.3|2.4|2.5|2.6|3|4|
|Introduction|Description|Prerequisites|Atlas On Demand|Deployment|Check Application VM|Create Backup|Delete Atlas VM|Verify Application VM|Restore Atlas VM|$|1|1.1|1.2|2|2.1|2.2|2.3|2.4|2.5|3|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Additional Information|$|1|1.1|1.2|2|2.1|3|
|Introduction|Alarm Description|Prerequisites|Procedure|Additional Information|$|1|1.1|1.2|2|3|
|Introduction|API Version|Document References|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Ericsson Extensions|Limitations and Recommendations|Limitations|Recommendations|$|1|1.1|1.2|2|2.1|2.2|3|4|4.1|4.2|
|$|
|$|
|Introduction|Purpose|Scope|Target Groups|Prerequisites|Required Competence|Documents|General|System Overview|Hardening Areas|Access Control|Hardening Activities|Hardening Before Installation and Integration|Initial System and User Accounts|Prehardened System Components|Hardening During Installation and Integration|Initial Administrator Credentials|DC-FW Configuration|Authenticate NTP Server|Change Legal Text Presented at Logon|ScaleIO Management Tools|Location of Logs|Product Security Maintenance After Installation and Integration|Manage Administrator Credentials|Change Certificates on vFuel|vCIC Host OS Hardening|Atlas User Management|vFuel User Management|GRUB User Management|Extreme Switch User Management|ScaleIO Access Control|NeLS Access Control|Managing TLS Certificates in CEE|CEE Infrastructure Network Hardening for SDN Tight Integration|Strong Password Conditions|Reference List|$|1|1.1|1.2|1.3|1.4|1.4.1|1.4.2|2|2.1|2.2|2.3|3|3.1|3.1.1|3.1.2|3.2|3.2.1|3.2.2|3.2.3|3.2.4|3.2.5|3.2.6|3.3|3.3.1|3.3.2|3.3.3|3.3.4|3.3.5|3.3.6|3.3.7|3.3.8|3.3.9|3.3.10|3.3.11|4|5|
|Introduction|Limitations|GUI Description|Change Password|Configure Session Time-out|Manage Networks|Create Network|Create Subnet|Create Port|Create Subport|Delete Port|Compute Environment|View Available Hosts|Instance States|View Host Details|Filter and Sort Available Hosts|Alarm Monitoring|View Active Alarms|View Alarm Details|View Alarm Operating Instructions|View Alarm and Alert History|Reference List|$|1|1.1|2|3|4|5|5.1|5.2|5.3|5.4|5.5|6|6.1|6.2|6.3|6.4|7|7.1|7.2|7.3|7.4|8|
|Introduction|Scope|Overview|Restore Procedure Flow|Prerequisites|Node Names|Login Credentials|Selecting Backup and Components|Restore Procedure|Perform Health Check|$|1|1.1|2|2.1|3|3.1|3.2|3.3|4|5|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Reference List|$|1|1.1|1.2|2|2.1|3|
|Introduction|Product Overview|CEE|Software Versions in CEE|Architectural Goals and Constraints|Carrier Grade Support|Infrastructure as a Service|Functional Description|Virtual Resource Control|Cloud Infrastructure Controller|Compute Server|vFuel|Multi-Server Network Configuration|Single Server Network Configuration|Storage|Data Center Gateway|Data Center Firewall|Traffic Networking|Cloud SDN Switch|Software-Defined Networking in CEE|Switching Fabric|Cloud Management System|Software Management|Backup and Restore|Audit and Health Check|Licensing|Performance Management|High Availability|Security|End-User Access|Reference List|$|1|2|2.1|2.2|3|3.1|3.2|4|4.1|4.2|4.3|4.4|4.5|4.6|4.7|4.8|4.9|4.10|4.11|4.12|4.13|4.14|4.15|4.16|4.17|4.18|4.19|4.20|4.21|4.22|5|
|Introduction|Terms|A-E|F-K|L-P|Q-T|U-Z|Glossary|$|1|2|2.1|2.2|2.3|2.4|2.5|3|
|$|
|Introduction|Prerequisites|Prepare to Configure Extreme X460 Switches|Configuration of Extreme X460 Switches|Configuration of Switch|Reference List|$|1|1.1|2|3|3.1|4|
|$|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Advanced Log Collection|Additional Information|$|1|1.1|1.2|2|2.1|2.2|3|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Collect Troubleshooting Data|Reference List|$|1|1.1|1.2|2|2.1|2.2|3|
|Introduction|Alarm Description|Prerequisites|Procedure|Check Disk Utilization|Performance Management Northbound API|$|1|1.1|1.2|2|3|3.1|
|Introduction|API Version|Document References|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Ericsson Extensions|Limitations and Recommendations|Limitations|Recommendations|$|1|1.1|1.2|2|2.1|2.2|3|4|4.1|4.2|
|Introduction|Prerequisites|CEE IdAM Architecture|User Roles|Privileged Access|Granting Superuser Privileges|Password Policies|Predefined Password Policies|Password Policy Management|Mapping Password Policies|Managing Cloud Infrastructure Users|Command Argument List|Listing Users|Retrieving User Details|Listing Groups of a User|Creating Users|Deleting Users|Modifying Users|Managing Groups|Listing Groups|Retrieving Group Details|Creating Groups|Deleting Groups|Modifying Groups|Deleting Users from Groups|Managing Passwords|Managing Passwords for Cloud Infrastructure Administrators|SSH-key Management|Creating Keys|Retrieving Keys|Deleting Keys|Reference List|$|1|1.1|2|3|4|4.1|5|5.1|5.2|5.3|6|6.1|6.2|6.3|6.4|6.5|6.6|6.7|7|7.1|7.2|7.3|7.4|7.5|7.6|8|8.1|9|9.1|9.2|9.3|10|
|Introduction|Prerequisites|Atlas Backup|Deleting Backup|$|1|1.1|2|3|
|Introduction|Scope|Hardware Terminology|Target Groups|Prerequisites|CEE Software Release Tarball|Generated and Prefilled Passwords|Editing the YAML Files|Using Anchors and Aliases|Editing config.yaml in Windows|Basic Parameter Settings|Region Name|Neutron Configuration|Hardware Switches|Configuring Extreme Switches|Configuring CMX Switches on BSP|Configuring Unmanaged Switch|Cloud Management|General Configuration|Additional Configuration for SDN Deployments|Server Configuration|Shelf and Blade Management|Compute Hosts|Virtual Cloud Infrastructure Controller (vCIC)|Virtual Fuel|NIC Assignment|Memory Allocation|CPU Allocation|Disk Reservation|Host Networking|Networks|Hardware-dependent Network Configuration|ScaleIO Network Configuration|SDN Network Configuration|Glance on Storage Network Configuration|Configure NTP|NTP Authentication|Legal Text Presented at Logon|Storage|ScaleIO Configuration|Local Storage (SSD)|Software RAID Configuration|Local Disk Partition Sizes|IdAM|LDAP Users|Glance Image Service|GRUB Configuration|Swift Configuration Options|SDN Integration on HDS|CM-HA|Fuel Plugins|Change of Linux I/O Scheduler|License Management Configuration|Advanced Parameter Settings|Advanced CPU Allocation|Automatic CPU Allocation Rules|Allocating CPUs for CSS (OVS)|Resource Allocation for vCIC|CPU Allocation for Single Server Deployment|NUMA Balancing|DPDK Physical Interface Driver|Kernel Parameter Settings|Increasing Virtio Queue Size|NIC Information|SR-IOV|SR-IOV Blade Configuration|SR-IOV Global Configuration|SR-IOV Cabling Scheme Configuration|PCI Passthrough|PCI Passthrough Alias Configuration|PCI Passthrough Blade Configuration|PCI Passthrough Cabling Scheme Configuration|Bandwidth-Based Scheduling|Nominal Bandwidth of Neutron Physical Networks|vSwitch Capacity|Neutron Configuration Options|Nova Configuration Options|Hardware Switch Configuration Options|Multiple Data Center Gateways|Change of Data Center Gateway Settings|Time Zone|Secure NBI API Endpoints|Fuel Administration Network|Location of Logs|Link Monitoring for CEE on BSP|Reduced Footprint Monitoring Data Collection|Zabbix CEE User|Excluding Disk At Deployment|Deployment Debugging Information|Reference List|$|1|1.1|1.1.1|1.2|1.3|1.3.1|1.4|1.5|1.5.1|1.5.2|2|2.1|2.2|2.3|2.3.1|2.3.2|2.3.3|2.4|2.4.1|2.4.2|2.5|2.5.1|2.5.2|2.5.3|2.5.4|2.5.5|2.5.6|2.5.7|2.5.8|2.5.9|2.6|2.6.1|2.6.2|2.6.3|2.6.4|2.7|2.7.1|2.8|2.9|2.9.1|2.9.2|2.9.3|2.10|2.11|2.12|2.13|2.14|2.15|2.16|2.17|2.18|2.19|2.20|3|3.1|3.1.1|3.1.2|3.1.3|3.1.4|3.2|3.3|3.4|3.5|3.6|3.7|3.7.1|3.7.2|3.7.3|3.8|3.8.1|3.8.2|3.8.3|3.9|3.9.1|3.9.2|3.10|3.11|3.12|3.13|3.14|3.15|3.16|3.17|3.18|3.19|3.20|3.21|3.22|3.23|4|
|Introduction|Target Group|System Characteristics|CEE System|Hardware Requirements|Server Test Configuration|Network Configuration|CPU Configuration|Host OS Cores|RAM Configuration|Introduction|Configuration|Storage Configuration|Local Storage Disk Space|Disk Requirements for Atlas|Disk Requirements for Nova Snapshots|Characteristics|General System Limits|Orchestration Interface|Tenant Execution Environment|Performance|Resiliency|Network|Performance|Resiliency|Tenant Network Limitations|Storage Limitations|In-Service Performance|Reference List|$|1|1.1|1.2|2|3|3.1|3.2|3.3|3.3.1|3.4|3.4.1|3.4.2|3.5|3.5.1|3.5.2|3.5.3|4|4.1|4.2|4.3|4.3.1|4.3.2|4.4|4.4.1|4.4.2|4.4.3|4.5|4.6|5|
|Introduction|Prerequisites|Hardware and Software Required|Tools|Installation Data|Time Required|Prepare Kickstart Server|System Setup|Network Preparation in case of non-BSP Hardware|Network Preparation in case of BSP Hardware|Install vFuel in Libvirt Managed VM|Change vFuel Password|Add Mandatory Fuel Plugins|Add Optional Fuel Plugins|Fuel Synchronization|Connect to DC|Troubleshooting|Reference List|$|1|2|2.1|2.2|2.3|2.4|3|3.1|3.2|3.3|3.4|3.5|3.6|3.7|3.8|4|5|6|
|Introduction|Validity|Prerequisites|Concept for Installing Hardware|Configuration|Preparing the Installation|Unpacking and Checking the Material|Installing Cabinets|Moving and Handling the Cabinet|Mechanical Installation|Grounding the Cabinet|Connecting Power|Installing Units|Installing the Dell Power Edge Server|Installing Extreme Switches|Equipping Units with Small Form-Factor Pluggable Units|Switch Units|Server Units|Installing Cables|Connecting Control Cables|Connecting Traffic and Storage Cables|Connecting External Cables|Connecting Power Cables|Powering On|Post Installation Activities|Concluding Routines|Reference Information|Dell PowerEdge|Switches|Reference List|$|1|1.1|1.2|1.3|1.4|2|2.1|3|3.1|3.2|3.3|3.4|4|4.1|4.2|5|5.1|5.2|6|6.1|6.2|6.3|6.4|7|8|8.1|9|9.1|9.2|10|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Reference List|$|1|1.1|1.2|2|2.1|3|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions for Solving the Alarm|$|1|1.1|1.2|2|2.1|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Reference List|$|1|1.1|1.2|2|2.1|3|
|Introduction|Scope|Prerequisites|Documents|Tools|Data|Conditions|Procedure|Preparations for Server Removal|Hardware Replacement and Server Configuration|Replacement of HDS-Based System|vFuel Discovery for Unmanaged Servers|Executing Installation Command|Data Collection|Fuel Synchronization|Concluding Routine|ScaleIO MDM Cluster Member Replacement|Procedure for ScaleIO MDM Replacement without Standby MDM|Reproducing Original Role Distribution|Reference List|$|1|1.1|1.2|1.2.1|1.2.2|1.2.3|1.2.4|2|2.1|2.2|2.2.1|2.2.2|2.3|2.4|2.5|2.6|3|3.1|3.2|4|
|Introduction|PM Report File|XML Structure Overview|Element: fileHeader|Element: measCollec|Element: measData|Element: measInfo|Element: granPeriod|Element: measType|Element: measValue|Element: fileFooter|Example|Monitoring API|Get Node Names|Get Meter Names|Get Item Value|Reference List|$|1|2|2.1|2.2|2.2.1|2.3|2.3.1|2.3.1.1|2.3.1.2|2.3.1.3|2.4|2.5|3|3.1|3.2|3.3|4|
|Scope|General|Description|Protocol Versions|Current Configuration Methods|Message and Signal Definition|RELP|Syslog|Functions and Procedure Declaration|RELP|Syslog over TCP|Constants Declarations|Reference List|$|1|2|3|3.1|3.2|4|4.1|4.2|5|5.1|5.2|6|7|
|Introduction|Summary of Supported Operations|API Operations|Create cApp|List cApp|Show cApp|Update cApp|Delete cApp|Show cApp Template|List cApp File|Show cApp File|Update cApp File|Cleanup cApps|Personalize cApp Template|Export Application|Scale out Stack|Scale in Stack|Stack Scaling List|$|1|2|3|3.1|3.2|3.3|3.4|3.5|3.6|3.7|3.8|3.9|3.10|3.11|3.12|3.13|3.14|3.15|
|Introduction|Overview|Logical Firewall Types|Connectivity|Security Domains|Atlas Firewall Rules|Configuration|Traffic Flow|Perimeter Protection|Hardening|$|1|2|2.1|2.2|2.3|3|4|4.1|4.2|5|
|Introduction|Prerequisites|Downloading Backup Files from Swift|Atlas Restore|$|1|1.1|2|3|
|Introduction|Target Group|System Characteristics|Prerequisites|CEE System|System Configurations|Hardware Requirements|Network Configuration|Generic Network Requirements|CPU Configuration|Compute Host|Compute Host Examples on BSP Hardware Platform|ScaleIO Host with MDM/TB and SDS|RAM Configuration|Introduction|Compute Host|ScaleIO Host with MDM/TB and SDS|Storage Configuration|Local Storage Disk Space|Local Storage Disk Space on BSP Hardware Platforms|Disk Requirements for Atlas|Disk Requirements for Nova Snapshots|Disk Requirements for ScaleIO|Disk Requirements for Software RAID|Storage Performance Consideration|Kickstart Server|Characteristics|General System Limits|Orchestration Interface|Tenant Execution Environment|Performance|Resiliency|Network|Performance|Resiliency|Tenant Network Limitations|Storage|Limitations When Using Local Storage|Resiliency|Distributed Storage, ScaleIO|In-Service Performance|Reference List|$|1|1.1|1.2|2|3|3.1|4|4.1|4.1.1|4.2|4.2.1|4.2.2|4.2.3|4.3|4.3.1|4.3.2|4.3.3|4.4|4.4.1|4.4.2|4.4.3|4.4.4|4.4.5|4.4.6|4.4.7|4.5|5|5.1|5.2|5.3|5.3.1|5.3.2|5.4|5.4.1|5.4.2|5.4.3|5.5|5.5.1|5.5.2|5.5.3|5.6|6|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions for Solving the Alarm|$|1|1.1|1.2|2|2.1|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Reference List|$|1|1.1|1.2|2|2.1|3|
|Introduction|Alarm Description|Prerequisites|Procedure|Analyzing the Alarm|Actions|Additional Information|$|1|1.1|1.2|2|2.1|2.2|3|
|Introduction|Scope|Prerequisites|Documents|Tools|Data|Conditions and Limitations|Procedure|Hardware Installation and Server Configuration|Expansion of HDS-Based System|vFuel Discovery for Unmanaged Servers|Executing Installation Command|Data Collection|Fuel Synchronization|Concluding Routine|Reference List|$|1|1.1|1.2|1.2.1|1.2.2|1.2.3|1.2.4|2|2.1|2.1.1|2.1.2|2.2|2.3|2.4|2.5|3|
|Scope|Introduction|General|Interfaces|Collection Type|Retention Policy|Source|Description|Alarms|Characteristics|ISP Logs|PM Reports|Rest (KPIs for Additional Monitoring)|Reference List|$|1|2|3|3.1|3.2|3.3|3.4|4|4.1|4.2|4.3|4.4|4.5|5|
|$|
|Introduction|API Version|Document References|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Ericsson Extensions|Limitations and Recommendations|Limitations|Recommendations|$|1|1.1|1.2|2|2.1|2.2|3|4|4.1|4.2|
|$|
|Introduction|Prerequisites|Conditions|Tools and Equipment|Documents|Disaster Recovery|Reconfigure Fencing|Reconfigure Fencing Behavior|Reconfigure Fencing Access to Out-of-Band Management|Reconfigure CSS CPU Reservation|Reconfigure CSS CPU Reservation|Change Legal Text at Logon|Change Legal Text in Multi-Server Deployment|Change Legal Text in Single Server Deployment|Change GRUB Password|Set Static Routes|Perform ScaleIO Maintenance Operations|Configure Cinder Backup|Runtime Installation and Configuration|Configure License Management|Appendix|NeLS Certificates|Reference List|$|1|1.1|1.1.1|1.1.2|1.1.3|1.2|2|2.1|2.2|3|3.1|4|4.1|4.2|5|6|7|8|8.1|9|10|10.1|11|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions for Solving the Alarm|$|1|1.1|1.2|2|2.1|
|Introduction|Alarm Description|Prerequisites|Procedure|Find Correct Mapping|Actions|Reference List|$|1|1.1|1.2|2|2.1|2.2|3|
|Introduction|Scope|Prerequisites|Documents|Tools|Data|Procedure|Create Backups|Disable nova-compute|Handling VMs|Scale in the CEE Region|Concluding Routine|$|1|1.1|1.2|1.2.1|1.2.2|1.2.3|2|2.1|2.2|2.3|2.4|2.5|
|Introduction|ISPLog|ManagedElementInformation|LogPeriod|From|To|ManagedElementConfiguration|SwInventory|LogRecords|LogRecord|ServiceOutageNetworkElement|SoneStart|SoneEnd|SoneEventDomain|$|1|2|3|4|4.1|4.2|5|5.1|6|6.1|6.1.1|6.1.1.1|6.1.1.2|6.1.1.3|
|$|
|Introduction|Scope|Open Virtualization Format|OVF Descriptor|Heat Orchestration Template|OVF in Heat for Orchestration|OVF-HOT Mapping|OVF Package Validation|Open Issues|OVF to HOT Map Details|ReferenceSection Details|DiskSection Details|NetworkSection Details|ResourceGroupSection Details|VirtualRouterSection Details|VirtualNetworkRouterInterfaceSection Details|ProductSection Details|StartupSection Details|DeploymentOptionSection Details|VirtualSystemSection Details|OperatingSystemSection Details|EnvironmentFilesSection Details|PlacementGroupSection and PlacementSection Details|BootDeviceSection Details|VirtualHardwareSection Details|Reference List|$|1|1.1|2|2.1|3|4|4.1|4.2|5|6|6.1|6.2|6.3|6.4|6.5|6.6|6.7|6.8|6.9|6.10|6.11|6.12|6.13|6.14|6.15|7|
|Introduction|Scope|Target Groups|Prerequisites|Conditions|Tools and Equipment|Documents|Main CEE User Types|Introduction to the CEE Interfaces|Interfaces for CEE Users|Interfaces for CEE Administrators|System and Initial User Accounts|Atlas VM|CLI Logon|GUI Logon|vCIC|vFuel|Compute Host|Storage Access|EMC ScaleIO Access|End-User Access|$|1|1.1|1.2|1.3|1.3.1|1.3.2|1.3.3|2|3|3.1|3.2|4|5|5.1|5.2|6|7|8|9|9.1|10|
|Introduction|Scope|Target Groups|Prerequisites|Workflow|Collect Data|Submit CSR|Additional Information|Split Files before Adding to CSR|$|1|1.1|1.2|1.3|2|3|4|5|5.1|
|Introduction|Alert Description|Prerequisites|Procedure|Actions|$|1|1.1|1.2|2|2.1|
|Introduction|Prerequisites|Procedure|Removal of the Faulty Switch|Hardware Installation of the Replacement Switch|Software Upgrade and Initial Configuration|Configure Network Settings|Conclude Replacement|Reference List|$|1|1.1|2|2.1|2.2|2.3|2.4|2.5|3|
|Introduction|Prerequisites|Atlas Command Overview|Atlas Command and Parameters|Create Backups|List Backups|Restore Backups|Delete Backups|Create OVFT, MISTRAL and HEAT Endpoints in Keystone|Create OVFT, MISTRAL and HEAT Users in Keystone|Help|Version|Update Network|Update HAProxy|Update Certificates|Disable Atlas Heat|Periodic Backups|Swift Command Overview|Swift Command and Parameters|Download Backup Files|List Backup Files|Configure Legal Warning|Manage Atlas Users|Create User|Delete User|$|1|1.1|2|2.1|2.2|2.3|2.4|2.5|2.6|2.7|2.8|2.9|2.10|2.11|2.12|2.13|2.14|3|3.1|3.2|3.3|4|5|5.1|5.2|
|Introduction|Target Group|Prerequisites|Conditions|Documents|Fuel Plugin Handling in CEE|Adding Fuel Plugins to CEE Region|Enabling Fuel Plugins for CEE Region|Mandatory Fuel Plugins for CEE|Networking|Ericsson CSS|High Availability|Ericsson CM-HA|Security|Ericsson TLS|Ericsson LDAP|Ericsson IdAM|Fault Management|Ericsson Watchmen|Ericsson HCFramework|Ericsson NdevAlarm|Ericsson Service Supervision|Performance Management|Zabbix Monitoring|Ericsson Zabbix Configuration|Ericsson PM|Infrastructure Management|Ericsson NTP|Ericsson Logging|Ericsson Infrastructure Setup|Ericsson Hardening|OpenStack Configuration|Ericsson OpenStack Configuration|Backup|Ericsson CEE Backup|License Management|Ericsson NeLS for CEE|Optional Fuel Plugins for CEE|Networking|Ericsson SR-IOV|Ericsson PCI Passthrough and SR-IOV Physical Function Passthrough|Ericsson SDN Controller|Ericsson BGP VPN|Ericsson L2GW|Extreme|Ericsson BSP CMX|Storage|EMC ScaleIO|Infrastructure Management|Ericsson Performance Enhancements|Ericsson HDS Agent|Appendix|Single Server Fuel Plugin Configuration|Dell Fuel Plugin Configuration|BSP Fuel Plugin Configuration|HDS Fuel Plugin Configuration|$|1|1.1|1.2|1.2.1|1.2.2|2|2.1|2.2|3|3.1|3.1.1|3.2|3.2.1|3.3|3.3.1|3.3.2|3.3.3|3.4|3.4.1|3.4.2|3.4.3|3.4.4|3.5|3.5.1|3.5.2|3.5.3|3.6|3.6.1|3.6.2|3.6.3|3.6.4|3.7|3.7.1|3.8|3.8.1|3.9|3.9.1|4|4.1|4.1.1|4.1.2|4.1.3|4.1.4|4.1.5|4.1.6|4.1.7|4.2|4.2.1|4.3|4.3.1|4.3.2|5|5.1|5.2|5.3|5.4|
|Introduction|Scope|Target Groups|Prerequisites|Overview|When To Perform a Health Check|File Location|Script Execution|Modules|Modules with [SKIPPED] Verdict|Report Problems|$|1|1.1|1.2|1.3|2|2.1|2.2|2.3|2.4|2.5|3|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions for Solving the Alarm|$|1|1.1|1.2|2|2.1|
|Introduction|Prerequisites|Procedure|Removal of the Faulty Switch|Hardware Installation of the Replacement Switch|Software Upgrade and Initial Configuration|Conclude Replacement|Reference List|$|1|1.1|2|2.1|2.2|2.3|2.4|3|
|Introduction|Alarm Description|Prerequisites|Procedure|Actions|Additional Information|$|1|1.1|1.2|2|2.1|3|
|Introduction|Prerequisites|Overview of API Components|CLI|Active Alarm List|Alarm and Alert History|Adding SNMP Trap Endpoint|Listing SNMP Trap Endpoints|Removing SNMP Trap Endpoint|FM Northbound REST API|Get Active Alarm List|Get Alarm and Alert History|Add SNMP Trap Endpoint|Get SNMP Trap Endpoints|Remove SNMP Trap Endpoint|SNMP Interface|SNMP - Active Alarm List|SNMP Trap|Additional Information|Reference List|$|1|1.1|2|3|3.1|3.2|3.3|3.4|3.5|4|4.1|4.2|4.3|4.4|4.5|5|5.1|5.2|6|7|
|Introduction|API Version|Document References|Prerequisites|OpenStack Networking Configurations in CEE|Segmentation IDs|Supported Operations|Basic OpenStack Operations|OpenStack Extensions|Deviations|Partly Supported Operations|Operations Not Available in CEE|Ericsson Extensions|Trunkport Extension|Limitations and Recommendations|Limitations|Concepts and Use Cases|General Terms|IP Address Management|MAC Address Management|Internal Neutron Network without IP Address Management|Internal Neutron Network with Neutron IP Address Management|Internal L3 Connectivity Using Neutron Router|L2 Connectivity Using SR-IOV|External Connectivity Guidelines for Deployments with SDN|Reference List|$|1|1.1|1.2|2|2.1|2.2|3|3.1|3.2|4|4.1|4.2|5|5.1|6|6.1|7|7.1|7.2|7.3|7.4|7.5|7.6|7.7|7.8|8|
|$|
|Introduction|Scope|Prerequisites|Prerequisites for Backup|Prerequisites for Restore|Command Parameters|Procedures|Backup Procedure|Restore Procedure|$|1|1.1|2|2.1|2.2|3|4|4.1|4.2|
|Introduction|Prerequisites|Time Required|Pre-Installation Steps|Temporary pre-Installation Steps|Audit Log Contains Several Unfiltered CM-HA Related Events|Install CEE Software in Server System|Temporary Installation Steps|Post-Installation Steps|Temporary post-Installation Steps|Post-Installation Activities|Error Handling|Flavor Metadata|CA and NBI Certificates for Secure HTTPS Access|Reference List|$|1|1.1|1.2|2|3|3.1|4|5|6|7|8|9|10|11|12|
|Introduction|Prerequisites|Time Required|Pre-Installation Steps|PCI Passthrough BIOS Configuration|CEE Reinstallation Fails with BSP|Temporary pre-Installation Steps|ScaleIO Backend Networks Are Not Configured on CEE-Managed Extreme Traffic Switch|Audit Log Contains Several Unfiltered CM-HA Related Events|Install CEE Software in Server System|Temporary Installation Steps|Post-Installation Steps|vcpu_pin_set Parameter in /etc/nova/nova.conf Is Set to Empty when Assigning CPU Values in config.yaml|SR-IOV Traffic Switch Ports Not Configured|Temporary post-Installation Steps|Migrate vFuel to CEE Region|Post-Installation Activities|Isolating Compute Hosts According to VirtIO Queue Size|Identify UID and GID for cinder User on vCICs|Error Handling|CA and NBI Certificates for Secure HTTPS Access|Reference List|$|1|1.1|1.2|2|2.1|2.2|3|3.1|3.2|4|5|6|6.1|6.2|7|8|9|9.1|9.2|10|11|12|
|Introduction|Alert Description|Prerequisites|Procedure|Actions|$|1|1.1|1.2|2|2.1|
|Introduction|Alert Description|Prerequisites|Procedure|Actions for Centralized Storage Alert|Actions Before Contacting Next Level of Maintenance Support|$|1|1.1|1.2|2|2.1|2.2|
|$|
|$|
|Introduction|Scope|Prerequisites|Procedure|Preparation|Identify Compute Hosts|Graceful Shutdown of CEE Region|Graceful Shutdown of External Storage|Graceful Shutdown of Switches, Routers, DC-GWs|Removal of Power Feed|Power-On of CEE Region|Power-On of CEE Compute Servers|Power-On of External Storage|Starting of Atlas VM|CEE Health Check Procedure|Starting of Tenant VMs|Reference List|$|1|1.1|1.2|2|2.1|2.2|2.3|2.4|2.5|2.6|3|4|5|6|7|8|9|
|$|
|$|
|$|
|$|
|$|
|$|
|$|
|$|
|$|
|$|
|$|
|$|
|$|
|$|
|$|
|$|
