The following commands are available for the user:

**ERASEALL**          - Erases all sectors DONT
**EraseErase**        - Erases all sectors except for 0
**EraseCleanup**      - Cleans up all empty sectors after an abort
**ERASE0**            - Erases sector 0 except for the id/info fields
**ERASE0ANDEID**      - Erases sector 0 including the eid
**ERASEPARAMSTOREs    - Erases the parameter store 's'(hex) sector
**ERASECODEMODEn      - Erases all code sectors for the specified mode
**ERASECANCODEMODEn   - Erases all CAN code sectors for the specified mode
**ERASEMCUCODEMODEn   - Erases all MCU code sectors for the specified mode
**ERASERECORDMODEn    - Erases ALL param store records for the mode
**ERASEMODEINFOn      - Erases mode info record for the mode
**ERASERECn s         - Erases the param store 's'(hex) record 'n'(hex)

**GETFEATUREMASK**    - Displays a mask of the currently supported features
**SETBAUDRATEn        - Sets the serial baud rate to specified value
**ENABLESILENTBURN**  - Silences any prints during the data part of a burn
**DISABLESILENTBURN** - Restores any prints during the data part of a burn
**SHOWCHECKSUM**      - Displays the checksum of the most recent burn
**SHOWBURNSTATUS**    - Displays the status of the most recent burn
**SHOWLASTERRMSG**    - Displays the text of the most recent burn error

**SHOWFLASHINFO**     - Displays a summary of the sectors
**SHOWRECINFOs        - Displays record summary of param store 's'(hex)
**SHOWMODEINFOn       - Displays mode info record for the mode
**SHOWRECn s          - Displays the param store 's'(hex) record 'n'(hex)
**SHOWEID**           - Displays the current equipment id
**SHOWOWNERID**       - Displays the current owner id
**SHOWLICENSE**       - Displays the current license info
**SHOWPRODUCTINFO**   - Displays the current product info

**SETMODEINFO n str   - Sets mode info record to str for the mode n
**SETREC n s len xx xx xx ...  - Writes a record to the param store 's'(hex)
                                 type n (hex) length len (dec)) data (up to
                                 10 values) xx (hex)
**CONDENSEPARAMSTOREs - Condenses the param store 's'(hex) sector, eliminating
                        obsoletes
**BURNEIDxxxx,xxxx,xxxx - Burns the specified equipment id (hex)

**GET_FLASH_STATS     - Displays information on flash errors
**CLEAR_FLASH_STATS   - Clears information on flash errors
FLTEST addr len iter  - Tests memory starting at flash address addr (hex)
                        for len bytes (dec) with iter (dec) iterations.

ATZn                  - Sets the current mode as specified
                        (Mode values are: 0   - BURNAPP, 1+ - Application
ATI0                  - Display the current equipment ID
ATI3                  - Display the current software rev
ATI4                  - Display the current software rev and date
ATI5                  - Display CAN device information

   - 1 sets to ignore can traffic, 0 returns to normal
**SETDEMOMODEn        - 1 enables CH demo mode, 0 disables CH demo mode
**SETBURNMODEn        - Enables CH burn mode for device with CAN ID n
**SETMCUBURNMODEn     - Forces MCU burn mode from code mode n
**CALPATCHFREQOFFSET** - Patches the frequency offset from factory calibration

**SHOWPRODUCTCONFIG**      - Displays the current Product Config Data.
**SHOWPRODUCTRECORD**      - Displays Product Record Area of Product
                             Config Data.
**SHOWFREEFORMTEXT**       - Displays Free Form Text area of Product
                             Config Data.
**SHOWSERIALNUMBERRECORDn  - Displays a Serial Number Record entry n (1-8)
                             from Product Config Data.
**SHOWUNITYCMTABLE**       - Displays the Unity CM table