UltraSite BTS Hub Manager C7.0 (Build 7.0.9) Readme

UltraSite BTS Hub Manager C7.0 (Build 7.0.9)

Contents

Introduction
System Requirements
Compatibility
Installation
Uninstallation
Document Errata
Version History
Known Issues
Other Information

Introduction

This document provides some important information about UltraSite BTS Hub Manager (referred to as "the Element Manager" or "the EM" hereinafter). Please read this (as well as the documentation for the Elements involved) through before using the Element Manager.

There is more detailed information also in the online Help of the Element Manager.

This Element Manager is used for managing the Transmission functionality of UltraSite BTS equipment.

Back to Contents

System Requirements

In order to use the Element Manager, you need the following:

Operating System (English versions):

Microsoft Windows 2000 Server
Microsoft Windows XP Professional
Microsoft Windows 2003 Server
Microsoft Windows Vista

The Element Manager does NOT officially support any other Windows Operating Systems.

An Intel Pentium compatible PC:

Processor: min. 300 MHz (recommended 500 MHz or more)
Memory: according to installed operating system (preferably the recommended amount)
Monitor: min. SVGA with 800x600 resolution (recommended 1024x768 resolution)
Hard disk: 10 MB free space exclusively for the Element Manager installation (recommended 25 MB)
Pointing device: mouse, trackball, touchpad or equivalent
CD-ROM drive
(local connection) 9-pin serial port in the PC
(local connection) LMP cable (see more details in section Other Information)
(remote connection) Network adapter with connection to DCN
(optional) Windows compatible printer

Back to Contents

Compatibility

This Element Manager release is compatible with the following:

Item	Product Version	HW Version	SW Version
FXC Bridge Card	A0, A1, B0, B1, B2, B3, C0, D0	E36148.01 A0, A1, B0	Bridge PDH part: S32685.01 A0, B0, C0, D0, E0 Bridge SDH part: P32684.01 A0, B0, B1, C0, D0, E0
FXC STM-1 Card	A0, A1, B0, B1, B2, B3, C0, D0	E36141.01 A0, A1, B0	P32682.01 A0, B0, B1, C0, D0, E0
FXC RRI Card	101 – 104	E55833.01 A0, A1, A2, B0	S55832.01 F0, G0
FXC RRI Card	105 – 109	E55833.01 C0, D1, E0	S55837.01 B0, C0, D0, E0
FXC E1/T1 Card	101 – 109	E36133.01 A0, B0, E0, E1, F0, F1, F2, G0	S36122.01 E0, F0, G0, H0
FXC E1 Card	101 – 109	E36123.01 A0, B0, E0, E1, F0, F1, G0	S36122.01 E0, F0, G0, H0
RRI Manager	-	-	C7.0 (build 7.0.9)
E1/T1 Manager	-	-	C7.0 (build 7.0.9)
Bridge Manager	-	-	C7.0 (build 7.0.9)
STM-1 Manager	-	-	C7.0 (build 7.0.9)
GCS communication stack	-	-	4.2, 5.0, 6.0
NetAct	-	-	NetAct OSS4.1, NetAct OSS4.2

The Element Manager is a part of SiteWizard 6 CD4.0.

Back to Contents

Installation

You can obtain the Element Manager through SiteWizard CD-ROM or you can download it viahttps://www.online.nokia.com/SWD/: Software Delivery > Operations Support Systems > Element Management Products > SiteWizard.

To install the Element Manager, follow the instructions of the SiteWizard installation program.
The installation program should start automatically when the CD-ROM is inserted in the CD-ROM drive. If it does not start, run setup.exe from the CD-ROM manually.

If you received the Element Manager installation package as a compressed file (.zip), extract the zip file contents into some temporary directory in your hard disk. Then run setup.exe from the directory. After the installation is completed, you can delete the temporary directory and its contents.

The Element Manager files are installed into the directory you selected during the installation (referred to as "Installation Directory").

The Element Manager startup (shortcut) icon is added into the "Nokia Siemens Networks" folder.

The Element Manager executable "UBHubMan.exe" is located in the Installation Directory.

To use connection services of the Element manager, GCS communication service (as per the compatibility chart above) must be installed.

Back to Contents

Uninstallation

To uninstall the Element Manager, follow the normal Windows application uninstallation procedure (from the Control Panel select Add/Remove Programs).
For more details, see the online Help of the Operating System.

NOTE: If you have saved some extra files (logs, configurations, etc.) to the Element Manager directory, those files and the directory will NOT be deleted. You need to remove them by yourself.

Back to Contents

Document Errata

There are no significant documentation updates.

Back to Contents

Version History

The Element Manager changes in release 2.0 (build 2.0.5) are:

Features Removed

SDH Support removed
SCF file support in Commissioning removed.

Features Added

XML & ROSE support
Loop Support
Trunet support
S/W copy.
S/W mismatch indication in Equipment view.
N/W topology in Sync dialog.
Configuration repport viewing nd printing.
Cross connection printing and print preview.
nx8k display support.
EOC & SYNC creates 2M cross connections.
In Q1 loop protection "Slave" is enabled now. If the node is "slave then both the primary and secondary ports are enabled in the loop protection dialog
Interface 12 disabled in Q1 loop protection if Trunet is enabled and RRI is master.
Condition bit status display and refresh support.
Support for D1 CC creation via graphical view.

Features Modified

New Alarms View
New Reset dialog
Uninstall Unit functionality improved.
Connection time to node decreased by allowing the manager not to read everything while connecting. Now the following data is read only when required :

Cross Connections
Identifications
Service Interface

Sync Loop bit reading by over more than 400%
Sync bit status is refreshed from node everytime the dialog is opened.
Added FC221 of HW-setup, removed FCs 122 and 125 of backplane
EAC sending included in node file comissioning
Improved Check Hops dialog, in addition to BER value Rx-Level and Hop Status are also polled from deviceConfiguration and Commisioning Report
Auto configuration changed to Circuit Management.
Registry settings are now saved under HKEY_CURRENT_USER.
Factory reset allowed only in LPM-connection.
At the start of commissioning all the CCs are cleared from node as well as model now.
It is not possible to create a 2M bypass connection to the same flexbus os the same unit now.
New progress dialog
Empty feild values are not allowed in Identifications' and EAC dialog now.
Help Files updated.

Bugs Fixed

Calibration warning only in case of SETS quality(14-17611)
Sending any information to mismatch and missing type of cards is prevented
No read Alarms from uninstalled unit after Factory Reset.

The Element Manager changes in release 2.1 (build 2.1.6.10) are:

Features Added

Graphical view of Q1 switches.
New File types (.nod, .tmn, .xcs etc) support.
Save Node / Unit Settings dialog while saving.
factory reset to Radios.
Automation of reset before Commissioning and restore back up settings.
Factory Resets with one command.
Toolbar icons added to Menu Items.
Support for direct flexbus commissioning.
FMM feature.
HSB support and Far End management.
Data is always refreshed when the report is opened in Connect mode.
Refreshing data when the report is opened can be cancelled.
Following are added to XML file :

EAC in/out,
EOC loop,
Q1 Int,
Service interface timeout,
Channel spacing,
Hop spacing,
Bandwidth.

Status Bar modiifed to show Connect Mode, Speed and Port.
Radio button in Alarms properties dialog pop-up menu to show the current state of the alarm.
Display of Pending CCs in CC view.
Progress for activation of CC Bank. Status bar is added to the CC view.
Flexbus and channel columns are added in the list control for EOC.
Sorting of TRXs., in List view of both "TRXs In This EDAP", and "Available TRXs".
Add/Remove of TRXs can be done by double clicking of the TRXs in the corresponding list. Implemented Drag/Drop feature for moving TRX's between the two lists.
Timeslot monitoring feature.
Creation of Trunet CC's in file mode.
Pending CC TP status display in CCProperties dialog.
New legend in CC view.
Creation of control CCs without effecting already existing inactive bank CCs.
Removal of platform interface and replacing the same with flexbus and channel in Cross-Connection Wizard for RRI.
Alarms support for HDR.
Creation of control 2M CCs for Sync Priorities, EOC, Sync Loop Bits and condition CC.
Creation of control 2M CCs in inactive bank when XML file is opened.
Conflicting CCs dialog.
Blocked Trunet interface dialog.
"Nokia" logo on the Right Hand corner of the menu bar.

Features Modified

EOC and Sync functionality ported to Platform.
Migration of Circuit Management to platform
Enhancements to SW copy GUI to show source and destination unit and "Activate after copy" check box removed for Master Unit.
Modifications to Identification dialog implemented. The Identification dialog has been remamed to "HardWare Identification" and the Unit Identification reading is now done by using the new menu command.
Enhancements to Configuration and commissioning report to increase readability.
About dialog harmonized according to UI guidelines.
Connection->Connect... menu option changed to Connection->Connection Tool ...
Commissioning Wizard and RBS menu disabled in Remote connection mode.
Maintenance and Alarms menu disabled in File Mode.
"Install All" pop-up menu option disabled in File mode
Automatic refresh done after install all.
Refresh all is done after the Master card is given HW Reset.
Provision of creating 2M bypass CC when all PIFs are occuopied.
Flexbus and channel columns are added in the list control for EOC.
Time Slot 1 as default in condition dialog in both CC wizard and Loop topology of Traffic Manager
Provided Combo boxes for Start and End Time slots in Traffic Manager.
Control 8K Ccs are not stored in .nod file. They are now created on fly when the file is opened for reading. This is done to harmonize the behavior with XML file.

Bugs Fixed

Enter doesn't work in User Notes field.
If a Radio that is in "wrong type" state is uninstalled it dissappears totally from the equipment view
When changing the show status from the Tools - Options - View, it doesn't work when using the Apply or OK buttons until you click the Menu bar again.
Not-in-use RRI IF's reported wrong in Configuration report bug fixed.
User name is allowing only spaces in commissioning.
When opening the configuration report, also card's information should be showm.
When there is no E1/T1 or E1 card in the equipment view the priorities page allows selection of "Sync Input".

The Element Manager changes in release 2.1-1 (build 2.1.6.13) are:

Bugs Fixed

Pronto # 2590ES11P : In HSB far end view manager shows random alarms for far end.
Pronto # 2594ES11P : In HSB far end view: Manager connection trough OSS, if HSB far-end information refresh rate is selected to 30s or less -> manager in constant refresh loop, not possible to break.
Pronto # 2116ES11P : "In Configuration report, there is still Bandwidth: half,should be Modulation 16-state(For Flexi Hopper)".
Pronto # 2594ES11P : The refresh times are different than the user has set. For instance, if the user sets refresh rate to 20sec, the actual refresh happens after 9 seconds. If it is set to 10sec, the refresh happens after 4sec.

The Element Manager changes in release 3.0 (build 3.0.10) are:

Features Added

Cositing of SDH and PDH cards supported.
When creating cross connect's from a STM interface to a PDH interface, then the allocation of the FXC Bridge internal 2M interface shall be done automatically. The user shall not need to configure or confirm the allocation of the FXC Bridge internal interface.
New Sync Functionality : An E1 signal received at an external E1 Interface can be used as synchronisation reference for the SDH node clock.
Forced Protection switch for SDH PB2 CC.
Q1 into to ext switch.
Selective deletion of SDH or PDH side of CC in a SDH-PDH cross-connection.
Software Mismatch list for STM1.
Q1 Scripting Tool can be launched from Manager.
It shall be possible to calibrate the free-run PDH node clock by management action, without the need to be locally present or to use an external measurement device.
3 D-Bus support
Backward compatibility with ITN C1.2 node SW.
XML file save - Displays message box saying XML file does not save all the settings that are saved by the node file.
Changes to Resets, RBS and Save Node Settings dialog as per the approved document.

Feature Modified

All Manager features to support SDH - PDH cosited node.
Now Bridge Interface cannot be selected for conditions in PB2 type CCs.
It's possible to enter "," and "." in user notes with ITN C2.2 node SW.
Software copy dialog - Software ID and version modification in EM. If inactive bank SW is 2.2 or higher and active bank SW is 2.1 or less.

Bugs Fixed

Pronto # P309E02 : Unit uninstallation does not remove CC's completely.
Pronto # 2811ES41 : Limitations in Commissioning Report.
Pronto # 3709ES38 : Modification of a protected cross connection´s termination point may fail and after error messages the modified CC is not shown.
Pronto # 3189ES08P : File Mode: Flexbus (FB2) CC's are not removed when FXC RRI is changed to HSB mode, which may cause manager crash when settings are added to FB1 after HSB has been enabled.
Pronto # P183902 : Alarm Monitoring and Refresh Selected shows 'HW-mismatch' unit as 'Not present'.
Pronto # 3076ES08P : Limitations in Configuration Report.
Pronto # 2146ES11P : Site name is not set to node when restoring node settings or commissioning with MHMan.
Pronto # 3309ES08P : Saving C2.0 Node Offline File (*.dat) with C2.1 managers (*.nod) corrupts cross-connections.
Pronto # 1-31073101: MetroHub manager shows only 16 MCB/LCB values.
Pronto # 2144ES11P : Restore backup settings to C2.0 node with C2.1 HubMan don't always send all settings.
Pronto # 1-41436877: Manager crashing when a CC is created.
Pronto # 2677ES43 : Data Hybrid graphical representation.
Pronto # 3220ES42 : EAC alarm after downloading a configuration file.
Pronto # 3732ES42 : Wrong default value of offline files.
Pronto # P275902 : Hub Manager Metro Hub Manager- External alarm names are not shown correctly in Alarm Window when not default name.

The Element Manager changes in release 3.1 (build 3.1.4) are:

Features Added

It shall be possible to install/delete licences to licencing compatible units. Currently only Flexihopperplus units support licensable features.
ALCQ and ATPC support added to Flexihopper units.
Scrambling polynom support added to Flexihopper units.
Help updated.

Bugs Fixed

Pronto # 9555ES11P - No. of EOCs are limited to 16.
Prontos # 9515ES11P & 9115ES11P - In-usage of PIFs 13, 15 and 16 is disabled when using FXC RRI as master with old node SW and ITN C2.2 EMs
Prontos # 1-43467532 & 8704ES11P: Loss of TRXSIG channel when expanding TRXSIG from 16 to 32kbit/s.
Pronto # 9218ES11P : Crash of MH Manager after card removal.
Pronto # 9273ES11P : Win2000 and WinXP startup menu contains useless C2.1 startup icons for HubMan and UBHubMan when SiteWizard is updated to C2.2.
Pronto # 9480ES11P : Traffic cut (1s AIS) when calibrating PDH node clock.
Pronto # 10351ES11P : Manager goes background during commissioning.
Pronto # 4365ES10P : Power range indication is missing in USBTS Hub manager.
Pronto # 10722ES11P : Chaining related menus disabled in MHBMan after activation of SW of OU connected to RRI slot 1.
Pronto # 10896ES11P : Chosen scrambler polynome is missing in commissioning report.
Pronto # 10766ES11P : Alarm location '1-RRI SB73' not very helpful.
Pronto # 10809ES11P : FXC RRI Flexbus BER measurement named wrong in RRIMan.
Pronto # 11160ES11P : Remote use via NetAct not possible with USBTS Hub Manager.
Pronto # 11118ES11P : One CC disappear when enabling HSB Hop View.

The Element Manager changes in release 4.0 (build 4.0.14) are:

Features Added

Help updated.

Features Modified

CRC checksum problem with SDH protected Cross-connections.
COM port change - Number of selectable COM ports should be more than 4.

Requirements implemented

ITNSysRqt0906 - Default settings to be same with Node SW.
ITN_SysRqt0916 - Configurable number of D-busses.
FXC_SysRqt_0281 - SW mismatch in unistalled state (pronto 8287ES11P).
ITN_SysRqt0801 - Traffic Manager to support STM-1.
ITN_SysRqt0880 - User access levels to Element Managers.
ITN_SysRqt0808 - Support of xml formatted files for backup of configuration data.
ITN_SysRqt0943 - EM hides cryptic part of Circuit Manager created CC.
ITN_SysRqt0951 - Support of Site ID as string and using Site ID to select node instead of Site Name.
ITN_SysRqt0940 - Addition, modification support for nx8k CC.
ITN_SysRqt0957 - E-Licensing support for FB Capacity.
ITN_SysRqt0910 - same pilot bit within one node for different protected bi-directional cross-connects.
ITN_SysRqt0940 - Addition, modification support for nx8k CC.
EM setups should clean the registry during uninstallation.
ITN_SysRqt0760 - Selection of Bridge TS in SDH-PDH CC creation.

Bugs Fixed

Pronto 5432ES11P : Com Port inconsistency on Windows NT with BTS Manager 3.3.3.
Pronto 5548ES05X : Com port shown on Ultrasite Hub manager is wrong.
Pronto 8172ES11P : Problems with help.
Pronto 8415ES11P : Differences between USHBMan offline 'Alarm properties list' and specified values.
Pronto 9304ES11P : Wrong error message when selecting MetroHub node XML -file in UltraSite BTS commissioning.
Pronto P134102 : Node Managers - PumaMan - Documentation - Help and User's Manual. Wrong value in help.
Pronto P152202 : Node Managers - PumaMan - Implementation. Alarm properties in file mode versus connect mode.
Pronto 9397ES11P : Wrong values for SDH internal clock in file mode.
Pronto # 11534ES11P : Wrong kind of .xml file causes troubles with restore backup settings.
Pronto # 11561ES11P : Flexbusses goes off when saving file in file mode.
Pronto # 11603ES11P : The changing, adding or deleting of MCB/LCB´s remotely fails and causes connection problem.
Pronto # 11602ES11P : RRI 2M cross-connections are lost if the Synchronization list is changed in anyway during remote connection.
Pronto # 9268ES11P : Trunet settings not stored in configuration file.
Pronto # 9164ES11P : Traffic cut (1s AIS) when adding/removing a second priority to PDH synchronization list.
Pronto # 2901ES43 : EOC-dialog-shows no available e1b-channels.
Pronto # 10560ES11P : Synchronization window shows illegal selection still after Apply has been pressed.
Pronto # 11562ES11P : Timeslot monitoring doesn't work.
Pronto # 11527ES11P : Differencies in configuration reports (.NOD & .XML).
Pronto # 11152ES11P : FMM warnbox is displayed twice.
Pronto # 9166ES11P : Loss of frame alignment (2M) when switching from Sync Input to another synchronization source.
Pronto # P185402 : XML file commissioning does not send Q1 loop protection settings to node.
Pronto # 8058ES11P : Inactive XC bank does not empty after HW Reset when Bridge in node.
Pronto # 9269ES11P : Circuit manager data not restored when restoring backup settings from file.
Pronto # 8678ES11P : Nodemanager allows to calibrate PDH node clock if 'Internal Timing' is the active source.
Pronto # 2589ES11P : The FMM display fields in the ITN Managers lists measurement results inconsequently.
Pronto # 2846ES08P : MHMan allows interfaces with pending CCs to be selected in timeslot monitoring even if they can't be read.
Pronto # 9501ES11P : All protected CC´s are not shown the same way if the unit with Protecting TP is ripped out.
Pronto # 3076ES08P : Limitations in Configuration Report.
Pronto # 8836ES11P : 'Refresh Selected' (Node Manager) does not work in case of missing FXC Bridge node master.
Pronto # 10636ES11P : The CC wizard does not always make the CC´s to the first available PIF´s of a RRI unit.
Pronto # 8864ES11P : Manager allows user to select PIF#0 as sync source when FXC RRI as master.
Pronto # 8819ES11P : Problems with Timeslot monitoring in MHBMan.
Pronto # 2924ES08P : Inconsistancy with FMM buttons in Radio wizard hop status detection and reporting in single mode.
Pronto # P186602 : If all of the FXC unit's LIFs or PIFs are set to Not In Use in a XML file, after commissioning, they all are set to In Use.
Pronto # 2560ES08P : When creating a 2M bypass CC, the manager doesn´t detect if channel 1 is already used by synchronization list.
Pronto # 2153ES11P : The Flexihopper Rx Frequency (kHz) is always saved as 0 into XML file when online.
Pronto # 8313ES11P : Possible to calibrate against a clock in holdover mode.
Pronto # 11599ES11P : When a Outdoor unit is uninstalled the cross-connections of the node are read for no reason.
Pronto # 12008ES11P : Metrohub nodemanager eats all memory it can get.
Pronto # 12418ES11P : RRI DBus settings in MS and US cabinet doesn't work.
Pronto # 2151ES11P : Settings that are saved incorrectly to XML file due to errors in XML specification.
Pronto # 12601ES11P : MetroHub Manager selects wrong RRI PIF.
Pronto # 12982ES11P : Outdoor units uninstalled during Restore Backup Settings procedure (old node SW).
Pronto # 8276ES11P : EOC Cross-connections cannot be modified.
Pronto # 9273ES11P : Win2000 and WinXP startup menu contains useless C2.1 startup icons for HubMan and UBHubMan when SiteWizard is updated to C2.2.
Pronto # 11495ES11P : FMM measurement for HSB link with FH+ does not work with newer version of radio SW (B4).
Pronto # 2924ES08P : Inconsistancy with FMM buttons in Radio wizard hop status detection and reporting in single mode.
Pronto # 4362ES10P : FMM possible with ALC switched on.
Pronto # 12948ES11P : GUI: Q1-Management dialogs.
Pronto # 12893ES11P : File update with radio can't be done correctly.
Pronto # 12916ES11P : Restore backup settings with .xml-file turns flexbusses off.
Pronto # 7424ES11P : Illegal command messages while viewing & changing CCs on ITN C1.2 Card with 1.2 Software if 2M bypass CCs have been created.
Pronto # 8836ES11P : 'Refresh Selected' (Node Manager) does not work in case of missing FXC Bridge node master .
Pronto # 9125ES11P : Error messages in factory defaults reset for SDH config when using C1.0 rel. node SW and C2.2 EM.
Pronto # 9280ES11P : RBS selection does not fit with specification.
Pronto # 12943ES11P : Site selection help doesn't exist.
Pronto # P274502 : "LYNX -- Node Manager -- Hub Manager Q1 EOC connections in the inactive CC bank window can not be modified".
Pronto # 13245ES11P : FXC STM1 Commissioning - Commissioning STM1 causes NM to crash.
Pronto # 11270ES08P : CC wizard keyboard keys not same as previous releases.
Pronto # 2741ES11P : It's not possible to make CC with Tab and arrow keys.
Pronto # 12937ES11P : Commissioning report help button is missing.
Pronto # 12898ES11P : Help button is missing from CC properties dialog.
Pronto # 12946ES11P : Extra space character in splash screen.
Pronto # 14886ES09P : Saving node settings with HubMan / USBTSHubMan fails.
Pronto # 2376ES11P : & Symbol not displayed in CC Bank.
Pronto # P234602 : Time stamp in the top of the alarm-view doesn't update when Refresh All is pressed.
Pronto # 9994ES11P : Q1 Ext connection does not recover after chainging speed.
Pronto # 9036ES11P : MetroHub Manager Alarm Window Locked.
Pronto # 11483ES11P : Tx missing in far end view of UltraSiteBTSHub.
Installation Problem related to GCS - Failure message changed
Pronto # 13567ES11P : Synch not switching to Internal in E1/T1 Manager C3.3 for FC Unit.
Pronto # 13562ES11P : The synchronization window does not indicate if the synchronization switches to internal clock for FC E1/T1.
Pronto # 11233ES11P : SDH node synchronized to E1 may lose synchronization in case of E1 with active far end alarm.
Pronto # 13219ES11P : Node Manager seem to calibrate internal clock, though in fact actual source is internal.
Pronto # 9149ES11P : 'An unsupported operation was attempted' message during remote connection.
Pronto # 13479ES11P : Message about 'Unsupported command' when starting USBTSHubManager from Netact.
Pronto # 6022ES08P : UltraSiteBTSHub manager's UI is hanging.
Pronto # 13722ES11P : Faulty data structure when sending Circuit Managent data - First char of site name overwritten.
Pronto # 13684ES11P : STM-1 Callibration - STM-1 Callibration over Node Manager not working.
Pronto # 13702ES11P : FMM with attenuated radio hop returns wrong response in MHB.
Pronto # 13703ES11P : FMM in MHB Commissioning Wizard is NOK if far end radio FE changes.
Pronto # 13731ES11P : Circuit-related cross-connections not shown as pending in EM's cross-connection window.
Pronto # 13832ES11P : Deleting MCB/LCB ´s also removes the 2M CC´s from the payload cross connections in the active CC Bank.
Pronto # 13838ES11P : EM does not send sync defaults to PDH node when pressing Defaults button.
Pronto # 13896ES11P : Creating CC gives error message.
Pronto # 13898ES11P : Help button and help text is missing from conflicting CC's window.
Pronto # 13962ES11P : The pending CC ´s and semi pending CC´s are not shown with the correct font and colout if a FXC unit is ripped out.
Pronto # 13980ES11P : SDH Traffic Manager - Missing mapping to STM-1 VC-12 channel.
Pronto # 13960ES11P : Fault on Abis allocation list on UltraSite BTS with FXC STM/Bridge cards.
Pronto # 14039ES11P : RRI CC NM - Creating a cross-connection with RRI generates an error message always.
Pronto # 14523ES08P : Fading margin measurement problem with old FXC RRI.
Pronto # 13955ES11P : Far end management (in element manager) in case of HSB does work.
Pronto # 14166ES11P : Quality alert while calibrating though reference source had quality G.811.
Pronto # 14568ES11P : Modify Bridge resource allocation during XC creation does not work correctly in node manager.
Pronto # 14228ES11P : MHB Commissioning Wizard does not support changing of channel spacing of MH.
Pronto # 14242ES11P : In MHBMan Commissioning Wizard FEC column Flexbus BER is displayed.
Pronto # 14249ES11P : Element Manager does not calibrate the free-run PDH node clock of the FXC Bridge unit.
Pronto # 14267ES11P : FMM far end OU wrong in MHB Commissioning report.
Pronto # 14303ES11P : SDH priority list displayed though neither Bridge nor STM-1 unit installed.
Pronto # 14579ES11P : Flexbus power "off" is not sent to the unit when using Commissioning Wizard and *.xml -file.
Pronto # 14580ES11P : "Modify" missing in HubMan's XC-view pop-up window for XC between FXC Bridge PDH channels over 15 (16-20) and some PDH unit.
Pronto # 14575ES11P : Some MHB IDs are not sent to the node and units when using Commissioning Wizard with *.xml -file.
Pronto # 14613ES11P : HSB polling stops if another unit is selected in MHBMan Eq view even if setting is still on.
Pronto # 14551ES11P : When MHBMan disconnected and reconnected to another node Comm Wiz FMM dialog shows the results from first node.
Pronto # 14550ES11P : Commissioning Wizard FMM dialog shows OU1 old results when OU2 dialog opened.
Pronto # 14192ES11P : CC mismatch alarm when cc created with Traffic Manager (PDH node).
Pronto # 14468ES11P : FMM result added for far end even if connection cut.
Pronto # 14470ES11P : If radio hop is attenuated for some time to more than BER3 during FMM result displayed wrong.
Pronto # 14803ES11P : Wrong version info in Print review.
Pronto # 10539ES10P : Change in CC type causes a traffic cut.
Pronto # 9164ES11P : Traffic cut (1s AIS) when adding/removing a second priority to PDH synchronization list.
Pronto # 15047ES11P : UALC feature does not prohibit remote modification of system although feature installed and enabled.
Pronto # 15034ES11P : RRI Manager disables D/Bus on Master card in case Slave RRI card platform interface settings changed.
Pronto # 15040ES11P : Element Manager always tries to connect to COM1.
Pronto # 14957ES11P : All Tools->Options settings are not saved when exit.
Pronto # 14593ES11P : Accept Site Selection -dialog in Commissioning Wizard shows 'Site Name' from the Node and not from the xml-file.
Pronto # 14625ES11P : Nod file operation mode saved wrong if one OU missing.
Pronto # 14542ES11P : FMM result not added to MHB Commissioning Report for OU connected to old RRI.
Pronto # 14543ES11P : FMM result not added to RadioWizard Commissioning Report for OU connected to old RRI.
Pronto # 14788ES11P : Refresh option in MetroHub XC window does not work if faulty condition is cleared.
Pronto # 14706ES11P : Copying full XC table (254 XCs) online from active bank to inactive bank often fails.
Pronto # 14731ES11P : MetroHub Manager offers multiple 2M XC on the same FXC Bridge channel.
Pronto # 9273ES11P : Win2000 and WinXP startup menu contains useless C2.1 startup icons for HubMan and UBHubMan when SiteWizard is updated to C2.2.
Pronto # 15012ES11P : Creating EOC or MCB/LCB to the FXC RRI PIF, which already has some control type of XC, gives error messages.
Pronto # 14966ES11P : Some progress dialogs are not visible when taking conf.report.
Pronto # 9460ES11P : "Wrong version mismatch on FXC STM-1 unit ".
Pronto # 15263ES11P : "FB capacity and usage not always saved correct in xml file".
Pronto # 14785ES11P : Unexcpected error message comes out if you cancel SW download.
Pronto # 15096ES11P : Manager crashes during software download to old FXC E1.
Pronto # 15123ES11P : Message 'Invalid file' when software download to old FXC E1 is tried.
Pronto # 15042ES11P : Payload cross-connection modified and traffic cut after synchronization source was removed or modified.
Pronto # 14900ES11P : Alarm monitoring settings not visible where expected in Configuration report.
Pronto # 15268ES11P : "Settings for PIF 13, 15 and 16 missing for slave RRI in USBHub Commissioning Report".
Pronto # 15379ES11P : "Manager crashes when upgrading FXC E1(T1) unit SW from C2.0 to C3 LR11".
Pronto # 15529ES11P : Embedded E1/T1 manager starts in read-only mode in file-mode.
Pronto # 11180ES10P : Commissioning Wizard fails to autom factory defaults reset when using old node SW with latest EMs.
Pronto # 15494ES11P : Sending a HW reset to a unit in slot 2 fails when using old node SW with newest EMs.
Pronto # 15643ES11P : When a sync priority is deleted with local LMP connection, the 2M CC is removed from the payload CC in the same channel in the active CC bank.
Pronto # 8316ES11P : Far end monitoring NOK for HSB in MHBMan and USHBMan.
Pronto # 15734ES11P : Restriction on 16 EOCs in MetroHub Manager C4.0.12.

The Element Manager changes in release 4.1 (build 4.1.2) are:

Features Added

Help updated.

Features Modified

None

Requirements implemented

ITN_SysRqt0961 - Traffic manager should support crossconnection protection in SDH
ITN_SysRqt0963 - Reduce configuration upload and download times
ITN_SysRqt0922 - A user shall be informed if there are inconsistencies between the cross-connection data represented towards the user via Element Manager and the actual cross-connection data at the ITN/FC STM node. If a inconsistency occured user shall be able to upload the cross-connection data from the ITN/FC STM node to re-establish consistency
ITN_SysRqt0829 - Hub manager shall support "Yellow alarm" for OU miss-configuration indication in far-end view

Bugs Fixed

Pronto # 15440ES11P : Node Managers do not fullfil ITN_SysRqt0951
Pronto # 15188ES11P : In UBHubMan Commissioning Report FB BER is displayed but named as FEC corr. rate for FHP and MH
Pronto # 14735ES11P : Site Identifier restricted to alphanumerical strings
Pronto # 5694ES11P : Sorting alarms in Alarm States Window only possible for RRI Manager
Pronto # 15150ES11P : After 'Reset to factory default' PDH Node is not included in 'select all' button
Pronto # 13045ES10P : STM-1 CC - Protected CC with Traffic Mgr Interface not shown
Pronto # 18319ES11P : Invalid File error while downloading FcSTM Software
Pronto # 18293ES11P : STM-1 CC - Protected CC with Traffic Mgr, Node Mgr Crashes
Pronto # 13076ES10P : SDH Prot CC - Change from loop to chain in SDH Traffic Mgr not possible
Pronto # 18377ES11P : D-Bus usage settings don't work properly

The Element Manager changes in release 5.0 (build 5.0.10) are:

Features Added

Help updated.

Features Modified

None

Requirements implemented

ITN_SysRqt0787 : Polling of Alarms in a separate thread.
ITN_SysRqt0967 : Full Loop Wizard(Undo the code for LoopWizard).Pilotbits check box functionality should be developed.
ITN_SysRqt0309 : Remote change of Q1 NE address and baudrate.
FXC_SysRqt0398 : The compatibility table from each unit shall be available on request to the management system/node manager.
ITN_SysRqt0863 : alignment of FMM GUI.
ITN_SysRqt0977 : Node status report.
ITN_SysRqt0978 : Part of Node Status report(ITN_SysRqt0977) : generation of the customer report from one dialogue, excluding ability to cancel.
FXC_SysRqt0407 : RAML 2.1 support limited to updation of "AdaptationVersionMajor".
ITN_SysRqt0972 : Error handling.
COMITN_xxx : Change of Version number of the EM to C5. Internal version to be changed to 5.0.
ITN_SysRqt0980 : Trouble shooting info to be made available with USBTS and Metro Hub Managers.
ITN_SysRqtxxx : Refresh Equipment View.

Bugs Fixed

Pronto # 18470ES11P : Wrong Version in node report.
Pronto # 17085ES11P : EDAP modifying in Traffic Manager failed.
Pronto # 16004ES11P : RRI manager is crashing if modulation mode of Flexihopper OU with license file is changed.
Pronto # 19178ES11P : SW mismatch does not vanish after Software upgrade.
Pronto # 16993ES11P : It is possible to create 2 TRXSIG's for one TRX.
Pronto # 2560C02 : No help available on clicking Help button in Sync settings dialog box.
Pronto # 17199ES11P : Modifying EOC Channel (Q1 Management).
Pronto # 15685ES11P : RRIMan displays wrong error messages when there is no FMM result available in OU.
Pronto # 18428ES11P : PDH CC - Commission Report shows condition bits in FE0 - CH0.
Pronto # 14967ES11P : Wrong help opens from protection info window.
Pronto # 19085ES11P : HubMan gives diff results via Commissioning Wizard for .nod and .xml files with same configuration.
Pronto # 19083ES11P : RRI 2M control CC can be removed from CC dialog window.

.

Pronto # 19084ES11P : RRI 2M CCs are not created after default sync. priority is set.
Pronto # 19662ES11P : Pop up menu in the Equipment view does not provide "Show Far End" option.
Pronto # 19716ES11P : After Switch-over Far End view not proper on Ultrasite.
Pronto # 19547ES11P : Synchronisation Priority gets lost when deleting MCB/LCB on the same Interface.
Pronto # 15164ES11P : D12 & D13 are available in D-bus after they are disabled from unit settings.

.

Pronto # 17100ES11P : Export of alarm history in file contains only deactivation dates, activations dates are missing.
Pronto # 15592ES11P : Changing the Q1 address or speed is not possible with a remote connection.
Pronto # 1-97391385 : Disabled Q1 port settings.
Pronto # 20014ES11P : Element manager hangs if refresh all is pressed.
Pronto # 19938ES11P : 'Functional error' while running the comissioning for cross-connections.
Pronto # 18337ES11P : Connection lost for RRI and E1T1 with new node manager(Build 1.1).
Pronto # 19961ES11P : DBus 13 doesn't work.
Pronto # 19220ES11P : Restore of backup settings failed.
Pronto # 19660ES11P : FarEnd Statistics data shows negative values, this is NOK.
Pronto # 19366ES11P : After remote Sw activation in FXC Bridge (Master), error â€žCould not send commandâ€œ occurred, while writing data (at 86%).
Pronto # 19433ES11P : After remote Sw activation in FC Bridge, error â€žCould not send commandâ€œ occurred, while trying to execute another Sw activation on the same card.

.

Pronto # 15744ES11P : It is not possible to modify Site ID when Bridge is master card.
Pronto # 20318ES11P : Missing/wrong online-helps in ITN C3 CD1.
Pronto # 19228ES11P : USHubMan Commissioning Report gives incorrect Information.
Pronto # 15498ES11P : Node Manager crash - When SW User Label is over 50 char then NM crashes.
Pronto # 15498ES11P : Scrambler selection missing if scrambler different in OU1 and OU2 when switching to HSB mode.
Pronto # 20417ES11P : The problem occurs because the SWDL summary window is not implented in Bridge Manager.

.

Pronto # 20395ES11P : Can not modify the new EOC via remote connection.
Pronto # 14497ES11P : Refresh button missing at FXC/FC STM-1 VC-4/TUG dialogue.
Pronto # 14679ES11P : MetroHub Factory default settings in offline mode wrong.
Pronto # 16726ES08P : USBTS: Q1 2400bit/s problem in slave RRI-card.
Pronto # 19187ES11P : Unit settings of RRI card are not changed without any error message, when modifying takes several minutes.

.

Pronto # 20770ES11P : FEM view displays OUs in not correct order.
Pronto # 20262ES11P : Structure and Location of Far end alarm is not displayed as specified in specification document.
Pronto # 20261ES11P : SB Number displayed for Location of Far end alarm with FIU 19 as Far end.

.

Pronto # 20530ES11P : Sync Priority is changed after activating inactive CC bank.
Pronto # 17085ES11P : EDAP modifying in Traffic Manager failed.
Pronto # 19806ES11P : EDAP modification failed on MetroSite.
Pronto # 14565ES11P : The FXC Bridge and STM Alarm properties lists are not correct in offline mode.
Pronto # 14567ES11P : The Node Alarm properties lists are not correct in offline mode with MetroHub Manager.
Pronto # 17346ES11P : Severity change of active alarms in US Hub Manager is possible, but does not have an effect other managers have different handling of changing severity alarm settings.
Pronto # 21152ES11P : Text missprinted in Action section of enhance Error Handling.
Pronto # 15741ES11P : When creating a MCB/LCB the manager does not check if the FB hannel is already reserved by a 2M bypass CC.
Pronto # 20271ES11P : PDH Ssynchronization is not restored correctly with MetroHub Manager and *.nod file.
Pronto # 20452ES11P : Allocation error in traffic manager after traffic channel move (delete and create).
Pronto # 21442ES11P : missing SDH/STM-1 values when using node status information inside a configuration report.
Pronto # 21536ES11P : MetroHubManager ID not displayed correct by Element Manager.
Pronto # 14716ES11P : If changing to another application and back when Comm Wizard is sending settings the progress bar and error windows stays hidden.
Pronto # 20732ES11P : Non Combined OMU SIG can be allocated over TCH.
Pronto # 14679ES11P : MetroHub Factory default settings in offline mode wrong.
Pronto # 21153ES11P : Usability: Missing progress indication.
Pronto # 14966ES11P : Some progress dialogs are not visible when taking conf.report.
Pronto # 21593ES11P : UBHub Manager is unable to receive data from STM1 card (ITNC2.2 SW).
Pronto # 22278ES11P : No alarm displayed.
Pronto # 22249ES11P : RRI Manager- FEmanagement-near end Radio frequency is not changed when changing several settings at once.
Pronto # 22307ES11P : Protecting ABIS on SDH interface is shown as CHAIN in Traffic Manager Necessary Information Missing.
Pronto # 22237ES11P : EM crashes when pressing additional settings button.
Pronto # 22224ES11P : SW copy on RRIn not possible - tick box not selectable.
Pronto # 34017ES09P : Company name incorrect in splash screen.
Pronto # 22644ES11P : Node HW Indentification shows Product Codes.

The Element Manager changes in release 6.0 (build 6.0.8) are:

Features Added

Help updated.

Features Modified

None

Requirements implemented

C3CD2_2 : Automatic timeslot monitoring refresh.
Bulk Command Implementation for STM1 for CRC4 Multifranme.
C3CD2_1 : Measurement/Display of internal +5V/-5V
C3CD2_9 : Selection/Deselection of PIF
C3CD2_21 : Reduce remote communication time
C3CD2_28 : Resource conflict checking.
C3CD2_14 : It shall be possible to switch all XCs of the node with one command.
C3CD2_23 : Improvement of alarm logging file
C3CD2_26 : Alarm rationalization (phase 2)
C3CD2_30 : Compatibility Management change
C3CD2_5 : A new Unit should enable to upgrade a complete node to the new SW status : SW copy
C3CD2_12 : Re-branding UI to Nokia Siemens Networks style
C3CD2_5 : A new Unit should enable to upgrade a complete node to the new SW status : All

Bugs Fixed

Pronto # 22528ES11P : HubMgr after reopen traffic mgr with node file and add SDH units
Pronto # 5831C02 : Softkeys are not working in Synchronization, traffic Manager, configuration report dialogues
Pronto # 5832C02 : Missing help in "Help-Help Topics-Contents" dialogue
Pronto # 5827C02 : Help not displayed for Help-Help Topics- Contents-References-Dialogue Boxes-Q1 Management-Q1 Management –Add/Modify EOC
Pronto # 5830C02 : Softkeys are not working for menu in FXC RRI, FXC E1T1, FXC STM1 manager
Pronto # 5825C02 : Window title needs to be changed for Help-Help Topics- Contents-Reference-Dialogue Boxes-Cross Connection Settings window
Pronto # 5826C02 : Help not displayed for Help-Help Topics- Contents-References-Dialogue Boxes-Synchronization- Synchronization Priorities/Add Modify loop bits
Pronto # 5824C02 : Help not displayed for "Help-Help Topics-Contents-Reference-Menu-File-Export File/Import File"
Pronto # 15577ES11P : FB2 is visible even HSB is 'on'
Pronto # 5327C01 : Saving of the PM data is not aborted in case of interruption in management connection
Pronto # 5838C02 : Duplicated softkeys for menues in E1T1 Manager
Pronto # 5840C02 : SDH-PDH Channels dialogue gives error while opening
Pronto # 5839C02 : Installation setup window is not named properly
Pronto # 22466ES11P : After a software download to a radio is aborted the selection of the alarm window results in an 'Could not sent command'
Pronto # 22246ES11P : Modification of 8*64k CC to 2M CC not possible. Deleting 8*64k CC and creating 2M CC works.
Pronto # 31743ES09P : Corrupted CC modifying doesn't work correctly.
Pronto # 8878ES05X : Controls in TS Monitoring do not get enabled when same TP is used in an active as well as in a pending CC
Pronto # 22496ES11P : VC12 configured for ABIS can not be selected, during traffic setup
Pronto # 22497ES11P : FarEndManagement with MetroHubManager 5.0.9: reset interface statistics clears also unit reset counters
Pronto # 22491ES11P : Changing the modulation and tx frequency simultaneously from far-end settings leaves the tx frequency not set
Pronto # 22282ES11P : FxcRRImanager-Changing FarEnd identifications does not work correctly with NearEnd RRI in MetroHub and FarEnd FIFA.
Pronto # 6198C02 : US,MH:Manager is not able to handle conflict for TRXSIG on TCH
Pronto # 6200C02 : MH: Delete All operation is not happening smooth for STM1 Abis allocation
Pronto # 14052ESPE01 : The +5/-5V unit measurement values are displayed incorrectly in the node status report.
Pronto # 13645ESPE01 : E1/T1 Manager does not accept valid FC E1T1 SW file
Pronto # 18327ES11P : Missing channel in Commissioning Wizard cross connections test
Pronto # 5446C01 : Incorrect message displayed by EM when changing VC12 Mapping mode
Pronto # 9195ES05X : US,MH: Compatibility menu is enabled when node SW on all the cards is less than C3.1
Pronto # 9193ES05X : US: Compatibility menu is disabled when RRI Old is not master
Pronto # 9192ES05X : MH: RRI Old as master compatibility dialogue is not opening at incompatible node state
Pronto # 9159ES05X : US_EMA: Clear Alarm History menu is not visible in manager when Alarms window is open
Pronto # 9158ES05X : US_EMA: Clear Alarm History menu is not visible in manager immediately after LMP login
Pronto # 9157ES05X : US_EMA: Alarm Logging records History Alarms by default when Alarms view is saved without opening History view
Pronto # 9183ES05X : With RRI new as master compatibility dialogue is not populating proper results on incompatibility
Pronto # 9181ES05X : Inconsistent compatibility behavior when MH is configured in PDH mode and SDH-PDH mode
Pronto # 9318ES05X : TRX numbers used in EDAP are displayed under the title 'Traffic Manager' in Traffic Manager window
Pronto # 9411ES05X : BTS Manager hangs when attempted to delete multiple conflicts
Pronto # 9388ES05X : Refresh of the cross-connection window moves the unit level RRI cross-connection in the Inactive bank when RRI is on slot-3 of ultrasite
Pronto # 6043ESPE06 : Cross connection mismatch window occurs unexpected
Pronto # 6084ESPE06 : SW compatibility management recommends old software
Pronto # PR9459ES05X : SW Upgrade Dialogue does not display proper information in new version combo box and upgrade fails when RRI old is DNAU.
Pronto # PR9458ES05X : New version combo box does not display latest version for other similar units in node when node is at C3CD2 level and one of the similar unit is compatible with node.
Pronto # PR9465ES05X : MH/US_EMA: Progress status Incorrect after Cancellation of Software Upgrade.
Pronto # PR9471ES05X : MH US_EMA Manager crashes when deleting a conflicting signal from a imported file.
Pronto # PR9476ES05X : Software Upgrade recognizes Missing Units as uninstalled units.
Pronto # PR9477ES05X : Hardware mismatch is not recognized before displaying Software Upgrade dialog.
Pronto # PR9473ES05X : Only SW download and SW copy happens successfully via SW upgrade dialogue.Activation fails.
Pronto # PR9466ES05X : Progress status is shown as failed for up to date units after Software Upgrade.
Pronto # 9611ES05X : SW activation is not happening via SW upgrade dialogue.
Pronto # 9585ES05X : Wrong Version shown for RRI old(C2.0 SW) on Node SW Upgrade window.
Pronto # 9605ES05X : RRI New Unit shown with Blue frame and Software compatiblity window shows units as compatible.
Pronto # 9354ES05X : Current status response is not correct and SW compatibility window is shown empty when RRI New as C2.2 SW is master.
Pronto # 9603ES05X : Wrong Version on RRI New is shown on Node SW upgrade window combo box.
Pronto # 9579ES05X : RRI old as DNCU , SW upgrade dialogue dows not list proper values in New Version combo box.
Pronto # 9524ES05X : SW Upgrade dialogue does not open when node has similar cards which do not support SW compatibility.
Pronto # 9532ES05X : when master is at C2.2 SW upgrade menu is disabled.
Pronto # 9526ES05X : upgrade with node SW less than C3 does not show proper information in new version combo box.
Pronto # 9530ES05X : SW upgrade dialogue is not opening on node with all similar cards which do not support SW compatibility.
Pronto # 9529ES05X : SW compatibility dialogue shows extra cards which are not present on the system with wrong new versions on a node with cards having SW less than C3CD1.
Pronto # 9525ES05X : 'SW copy does not work' error message during upgrade from C3CD1 to C3CD2 and vice versa.
Pronto # 9475ES05X : RRI SW on additional bank of E1T1 is not shown in SW upgrade GUI for RRI unit when RRI has C3 SW.
Pronto # 9630ES05X : SW activation fails on similar cards with SW less than C3CD1.
Pronto # 9640ES05X : Element Manager Shows all the Units as Uptodate In Ultasie when STM1 has C3.0 and below software.
Pronto # 9550ES05X : Additional image on FXC Bridge is not getting recognized when master RRI is at C3 level.
Pronto # 9523ES05X : additional image on FXC E1T1 is not getting recognized by SW upgrade dialogue
Pronto # 9575ES05X : SW from additional bank of FXC RRI is not getting recognized in SW upgrade dialogue.
Pronto # 6557ESPE06 : SW Compatibility window does not display incompatible units if unit with newer SW is uninstalled
Pronto # 17717ESPE01: MH on C3 CD1 level, shows no incompatibility when new C3 CD2 units are inserted
Pronto # 6388ESPE06 : Element Manager Display on MetroHub - Software Compatability
Pronto # 9581ES05X : USMGR OK button is enabled on Traffic Manager when conflict is present
Pronto # 9474ES05X : US_EMA Conflict is not getting detected for imported files
Pronto # 17271ESPE01: Software Upgrade on UltraSite is not successful, only parts are updated
Pronto # 6044ESPE06 : MH Manager crashs when protected XC condition bit values are selected
Pronto # 7394ESPE07 : Near-end scrambler polynom not changed when using MetroHub manager far-end settings dialog
Pronto # 9767ES05X : MHMGR: Manager crashing when OU Settings-Interleave status is changed
Pronto # 8983ES05X : Resource Conflict is not indicated when 8k CC is created on even numbered bit.
Pronto # 15055ESPE01: Traffic Manager allows Invalid configurations
Pronto # 7524ESPE07 : No response when upgrading units after SWDL
Pronto # 9655ES05X : Far End Indoor Unit is shown as '?' in far end view of Metrosite
Pronto # 17615ESPE01: Warning for incompatible SW does not pop up in remote management session
Pronto # 5327C01 : Saving of the PM data is not aborted in case of interruption in management connection
Pronto # 22466ES11P : After a software download to a radio is aborted the selection of the alarm window results in an 'Could not sent command'
Pronto # 17749ESPE01: Unclear status of unit after installation via remote management session
Pronto # 17590ESPE01 : Refresh of USBTSHubManager equipment view not possible with incompatible unit plugged in
Pronto # 9802ES05X : MH: when node has all cards at Less Than C3 SW SW copy is not working for E1or E1T1 card.
Pronto # 9803ES05X : US: When SW less than C3 on all cards sw copy is not happening for rri card.
Pronto # 9793ES05X : US/MH: Manager crashes when imported .abs file (Dbus).
Pronto # 9640ES05X : Element Manager Shows all the Units as Uptodate In Ultasie when STM1 has C3.0 and below software - Online Help text for FXC STM and compatability issue updated
Pronto # 9795ES05X: US/MH:Help is not present for Bridge-Measurement - Help button

The Element Manager changes in release 7.0 (build 7.0.8) are:

Features Added

Windows Vista Support

Requirements implemented

Migrated the Help from Win Help to chm format.
Look & Feel of the EM will be as per the look & Feel of the respective OS

Features Modified

None.

Bugs Fixed

None.

The Element Manager changes in release 7.0 (build 7.0.9) are:

Requirements Implemented

“Nokia Siemens Networks” folder shall be in ‘Start’ menu instead of ‘Start->Programs’ menu.

Features Removed

None

Features Added

None

Features Modified

None

Bugs Fixed

None

Back to Contents

Known Issues

The following issues are known for this Element Manager version:

Configuration Report : While Configuration Report is generated , "Functional Error" messagebox pops up : Problem with Node SW is assumed.
Save Troubleshoot Data : In File Saving sequence , generating "Statistics Report " for RRI-Unit will consume more time when the HOP is set.This is because, report is generated for IU's and OU's both in Far-End and Near-End.
Traffic Manager:ITN_SysRqt0961 - If a VC12, say K=1, M=2, L=2 is selected as a protecting interface, this is not shown as reserved when the VC12 frame of the protected frame is opened again.
List sorting does not work by clicking column header in all dialog boxes
When commission be sure that only one instance of Hub manager is connected to the node. Commission fails if there are multiple instances running and connected to the node because it's not possible to change LMP speed.

Back to Contents

Other Information

Product codes for some of the products:

Product	Code
LMP Cable	CS 72451.01 / T55270.01
SiteWizard 6 CD4.0 (via NOLS)	471919A.105
SiteWizard 6 CD4.0 (CD-ROM)	471918A.105

Pentium is a trademark of Intel Corporation.

Windows Vista, Windows 2003, Windows 2000 and Windows XP are registered trademarks of Microsoft Corporation.

Other products may be trademarks or registered trademarks of their respective manufacturers.

Nokia Siemens Networks operates on a policy of continuous improvement. Therefore we reserve the right to make changes and improvements to any of the products described in this guide without prior notice.

Nokia Siemens Networks is not responsible for any loss of data, income or any consequential damage howsoever caused.

Back to Contents