 
-262144 SOCKET_CREATION_ERROR
-262145 CSS_IP_ERROR
-262146 INPORT_THREAD_DUPLICATION_ERROR
-262147 INPORT_CREATION_ERROR
-262148 THREAD_NOT_MONITOR_OWNER_ERROR
-262149 PORT_NOT_FOUND_ERROR
-262160 Unable To Communicate With Device.    
-524288 Unable To Obtain Version Information From This Device.
-262166 Unable To Establish Connection With Device Status Report Interface.
-262167 Error! Protocol Infomation Unknown.
-262168 Device Log Protocol Unknown. 
-262169 Device Log File Not Supported.
-262170 Device Status Report Process In Failure Mode.               
-262171 Unable To Get The Requested Report From The Device.
-262172 Unable To Get The Requested Report From The Device; Device Status Report Process In Transfer Failure State
-262173 Device Status Report Process In Busy State Error.
-262174 Unable To Display Requested Report From The Device.
-262175 Unable To Set Device's Status Report Process To Idle Mode
-262176 FTP Error. Unable To Transfer Status Report File.
-262177 Internal Error. Failed To Get Status Report.
-262178 Status Report Build Command Failed.
-262179 Device Is In Unknown State. Unable To Get Status Report.
-262180 Unable To Save Status Report File.
-262181 Cannot Establish Connection With Device. Unable to Process Request.
-262182 Unable to Process Request.
-262185 Unable To Save Status Report To A Read Only File.
-262186 Unable To Save Status Report To A Hidden File.
-262187 CSS could not obtain a network port for fault management. Device fault information may not be displayed.
-524339 Unable To Set Channel Number In Device.
-524340 Invalid Value. Please Enter A Valid Value.
-524341 This Operation Requires A Device Reset. Do You Wish To Proceed?
-524342 Unable To Get Current Channel Number From Device.
-524343 Invalid Value. Please Enter a Valid Value Between 1 And 28.
-524344 Invalid Value. Please Enter a Valid Value Between 1 And 30.
-524345 This Operation is Supported in Service Mode Only.
-524346 Invalid Value. Please Enter a Valid Value Between 1 And 5.
-524347 Invalid Value. Please Enter a Valid Value Between 1 And 200.
-590129 Frequency 1 Deviation Is Not In The Range Of 1.8 kHz to 10 kHz.
-590130 Frequency 2 Deviation Is Not In The Range Of 1.8 kHz to 10 kHz.
-590131 Frequency 3 Deviation Is Not In The Range Of 1.8 kHz to 10 kHz.
-590132 Frequency 4 Deviation Is Not In The Range Of 1.8 kHz to 10 kHz.
-590133 Host Error Received. You Must First Issue A Keyup Command.
-590134 Invalid Value.  Please Enter A Valid Value.
-590135 Tx Deviation Alignment Has Been Successfully Saved!
-590200	The Auto-Net Procedure Failed. Internal Reference Has Not Been Aligned.
-327930 Unable To Set Vlan Number In Station.
-327931 Unable To Get Vlan Number From Station.
-327932 Invalid Value. Please Enter A Valid Value.
-327859 Save Failed. Make Sure The Disk Is Not Full or Write Protected.
-327860 Unable to start log file.
-400000 Unable to get the Internal Frequency Reference Oscillator status information from the device.
-400001 Unable to get the Internal Frequency Reference Oscillator alignment information from the device.
-400002 Internal Frequency Reference Oscillator Status is not Operational. Alignment will not be possible.
-400003 Internal Frequency Reference Oscillator module is not installed on the device.
-400004 Unable to get the transmit frequency value. Alignment will not be possible.
-400005 Unable to get the actual hardware type. Alignment will not be possible.
-400006 Unable to update Internal Frequency Reference Oscillator value.
