-327680 Please Wait. Calibration In Progress.
-327681 Calibration Process Is Complete.

-327733 Unable To Reset Station
-327700 Unable To Establish Communication. Start Session Failed.
-327683 This Operation Requires A Station Reset. During The Reset,\nCommunication With The Device Is Not Possible And All\nReal Time Service Screens Will Close.\nDo You Wish To Proceed?
-327733 Unable To Reset Station
-327730 Transmitter State Could Not Be Changed
-327731 Receiver State Could Not Be Changed

-327682 Unable To Perform RSSI Calibration.
-327683 This Operation Requires A Station Reset. During The Reset,\nCommunication With The Device Is Not Possible And All\nReal Time Service Screens Will Close.\nDo You Wish To Proceed?
-327684 Unable To Change Operational Mode Of The Station.
-327685 Invalid Value. Please Enter A Valid Value.
-327686 Invalid Value. Please Enter A Valid Value.
-327688 Unable To Get Launch Time Offset From The Station.
-327689 Simulcast Test Pattern Could Not Be Initialized/Terminated In The Station.
-327690 Unable To Get Transmitter Frequency From Station.

-327691 Unable To Get Receiver Frequency From Station.
-327692 Unable To Get Mode From The Station.
-327693 Unable To Set Launch Time Offset In The Station.
-327694 Transmitter Is Not Idle! Please Stop Transmitter Test Or \nAny Test Patterns You May Be Running Before Attempting To Align.
-327695 Transmitter Is Inhibited. Cannot Proceed With Power Amplifier Alignment.
-327696 Hardware Failure. Could Not Complete Power Amplifier Alignment.
-327697 Power Amplifier Alignment In Progress.
-327698 Power Amplifier Alignment Successful.
-327699 PA Alignment Timed Out. No Response From The Station.

-327730 Transmitter State Could Not Be Changed
-327731 Receiver State Could Not Be Changed
-327732 Unable To Get Date And Time From Device
-327733 Unable To Reset Station
-327734 Transmitter Test In Progress
-327735 Transmitter Test Was Successful In The Station
-327736 Transmitter Test Failed In The Station
 
-327780 Internal Protocol Information Error   
-327781 DEVICE_ERRORLOG_PROTOCOL_UNKNOWN 
-327782 DEVICE_ERRORLOG_FIEL_NOT_SUPPORTED
-327783 INTERNAL_ERROR_FAIL_TO_GET_REPORT
-327784 DEVICE_IN_FAILURE_MODE
-327785 DEVICE_BUILD_CMD_FAILED
-327786 DEVICE_TRASFER_CMD_FAILED
-327787 DEVICE_BUSY_STATE_ERROR
-393271 Unable To Communicate With Device.

-327830 Unable To Start Measurement Session On The Device.
-327831 Unable To Start Transmitter Metering On The Device.
-327832 Unable To Stop Transmitter Metering On The Device.
-327833 Unable To Stop Measurement Session On The Device.
-327834 Transmitter Test Interrupted.
-327835 Transmitter Test Not Executed.
-327836 Transmitter Test Not Executed! Transmitter Inhibited.
-327837 Transmitter Test Not Executed! DFB Enabled.
-327838 Transmitter Test Not Executed! Station Is Not In Service Mode
-327839 Transmitter Test Already Running.
-327840 Unable To Establish Communication. Stations Mode Has Not Been Changed
-327841 Unable to Start RSSI Measurements In The Station
-327842 Unable to Stop RSSI Measurements In The Station
-327843 Unable To Start BER Measurements In Station
-327844 Unable To Stop BER Measurements In The Station
-327845 Pattern Test Not Supported
-327846 Unable To Establish Communication With The Station. Pattern Transmission Has Not Been Initiated
-327847 Unable To Start Test Pattern
-327848 Test Pattern Running
-327849 Unable To Stop Test Pattern
-327850 Transmitter Is Disabled
-327851 Transmitter Is Failed
-327852 Invalid Test Pattern Request
-327853 Transmitter Is In An Unknown State
-327854 Unable To Initialize Screen. Can't Start Session
-327855 Can't Get Device Mode
-327856 This Operation Requires A Station Reset. Do You Wish To Proceed?
-327857 Unable To Change Operational Mode Of The Station
-327858 Test Is Running ! Do You Want To Stop The Test?
-327861 Station Error: Restart Transmitter Test.
-327862 Device Configuration does not support transmit functions.
-327863 Unable To Read TDMA Mode Parameter.

-327880 Unable To Start BER Measurement In Station
-327881 Unable To Start RSSI Measurement In Station

-393271 Unable To Communicate With Device.

-610304 Unable To Start Miscellenous Session On The Device.
-610305 Unable To Start Exciter Metering On The Device.
-610306 Unable To Stop Exciter Metering On The Device.
-610310 Unable To Start Receiver Metering On The Device.
-610311 Unable To Stop Receiver Metering On The Device.
-610321 Unable To Start Power Supply Metering On The Device.
-610322 Unable To Stop Power Supply Metering On The Device.

-610331 Unable To Start UHSO Metering On The Device.
-610332 Unable To Stop UHSO Supply Metering On The Device.
-610333 Station is not in Service or Normal Mode.
-610334 Unable to Key up the station             
-610335 Unable to Dekey the station.
-610336 Unable to Turn PA Test On.
-610337 Unable To Tuen PA Test Off.

-620000 Transmitter Test Timed Out. No Response From The Station.
-620001	Transmitter Test Not Executed! Station Mode Is Not Valid.
-620002 Trouble reading data from the device.\nNot all data is available.

-630400 Receiver Test passed.
-630401 Receiver Test not executed;\nStation mode is not Normal nor Service.
-630402 Receiver Test not executed;\nReceiver Failure.
-630403 Receiver Test not executed;\nReceiver Inhibited.
-630404 Receiver Test not executed;\nUnknown error.
-630405 Receiver Test in progress.
-630406 Receiver Test failed.

-630500 Unable To Change RX PL State to 'Turn OFF RX Qualifiers'
-630501 Unable To Change RX PL State to 'Turn ON RX Qualifiers'

-630510 Unable To Change TX PL State to 'OFF'
-630511 Unable To Change TX PL State to 'ON'

-630520 Unable To Change Selective Alarm State to 'OFF'
-630521 Unable To Change Selective Alarm State to 'ON'
