The Radio Service Software (RSS) is shipped to you on two floppy diskettes.

In order to install it to a hard disk, do the following:

1. Enter diskette no. 1 into the diskette drive and type:
   A: 
   A> INSTALL drive:    
2. Remove diskette no. 1 from the drive. 
3. Enter diskette no. 2 into the drive and type:
   A> INS2 drive:

   After installation, make sure that you are in the correct drive 
   (usually C:), and type: T5600

Notes:
-------
1. In case that this is not the first installation, ignore the 
   message: "Unable to create directory"
2. The RSS uses either COM1 or COM2 for programming the T5600.
