1.
Introduction
3.
Requirements
6.
Legal
notice
Welcome to the Entry Level Radio Customer Programming
Software (CPS).
|
Version |
Notes |
|
R02.02 (Build 58) |
Support Battery Type programmable
button. |
|
R02.01 (Build 56) |
Updated driver installation
method. |
|
R02.00 (Build 53) |
Support MDC and Quik-Call
II signaling system in some regions. |
|
R01.07 (Build 46) |
CPS name change. |
|
R01.04 (Build 35) |
Report feature enhancement. |
|
R01.02 (Build 30) |
Support for the UHF1 radios. |
|
R01.01 (Build 28) |
Support for the VHF radios. |
|
R01.00 (Build 21) |
Support for the UHF2 radios. Drag and drop support between models. Support for multiple selection configuration. For example,
select several channels in the tree view and set the parameters to the same
value at once. Support for custom views and undo/redo. |
|
Operating
System |
|
Microsoft®
Windows® XP Home/Professional Edition Microsoft®
Windows® 2000 Professional with SP2 Microsoft®
Windows® Microsoft® Windows® 7 |
|
Hardware
Recommendations |
|
· The
application takes approximately 350 MB of
free disk space on your PC. However,
more space would be required to save archive files of your radios. Each archive file varies in size depending
on the features of the radio. |
|
· For
processor speed and RAM, the recommendations given by Microsoft for the
release of the operating system that you are using should be sufficient. |
|
· A
USB port. |
|
· A
CD-ROM drive. |
|
· For
best display results, set the DPI setting of your PC to the |
|
Installation |
|
You need to have Administrator rights on the target PC in order
to install the software. Follow the
steps below for the CD-ROM version: · Insert
the CD-ROM containing the installation into the CD-ROM drive. · If
the installation application doesn Follow the
steps below for the software package version: · Unzip
the CPS package to a directory of a local disk. · Browse
to this directory and run the setup.exe program. Note:
1.
During re-install, settings for
preferences and dealer information will be reset to their default values. You
will need to check these settings after the new version has been installed
and make changes as necessary. 2.
If a previous version of CPS has
already been installed, you will be given the option to “Repair” or “Remove”. If you are upgrading the
CPS, then remove the previous version and start the installation process
again. If you are re-installing the
CPS, then choose the repair option. |
|
Removal |
|
From the Start button on the task bar of your operating system,
select Settings > Control Panel. Select the Add/Remove Programs option
within the control panel. Select the Entry Level Radio Customer Programming
Software item in the "Currently installed programs" box and click
the remove button.
|
|
Windows XP
Operating System |
|
Before
connect the USB cable to computer, please make sure your Windows Update
setting is “Ask me to search
Windows Update every time I connect a new device” via
right click “My Computer”
-> “Properties” -> “Hardware” -> “Windows
Update” Follow these steps to install the driver: 1. Connect the USB cable
between the host computer and the radio. 2. Windows will open a “Found New Hardware
Wizard” window. 3. Select “No, not this time” and press Next. 4. Select “Install the software
automatically (Recommended)” and press Next. 5. Wait while the computer
searches and installs “CP210x USB Composite Device“. If the
operating system prompts you that the software has not passed Windows Logo
testing, press Continue Anyway. 6. Windows will open a second “Found New Hardware
Wizard” window. 7. Select “No, not this time” and press Next. 8. Select "Install the
software automatically (Recommended)" and press Next. 9. Wait while the computer
searches and installs "CP210x USB to UART Bridge Controller". |
|
Windows 2000 Operating System |
|
The driver will be automatically installed and ready for
use when connect the USB cable between the host computer and the radio. |
|
Windows |
|
Before
connect the USB cable to computer, please make sure your Windows Update
setting is “Ask me each time I
connect a new device before checking for drivers” via
right click “Computer” -> “Properties” -> “Advanced System Settings” -> “Hardware” -> “Windows
Update Driver Settings” Follow these steps to install the driver: 1. Connect the USB cable
between the host computer and the radio. 2. Windows will open a “Found New Hardware” window. 3. Select “Locate and install driver software (recommended)”. 4. Wait while the computer
searches and installs the driver. |
|
Windows 7 Operating
System |
|
Before
connect the USB cable to computer, please make sure your Windows Update
setting is “Install driver
software from Windows Update if it is not
found on my computer” via right click “Computer” -> “Properties” -> “Advanced System Settings” -> “Hardware”
-> “Device Installation Settings” To Windows 7 (32 bit) operating system,
the driver will be automatically installed and ready for use when connect the
USB cable between the host computer and the radio. To Windows 7 (64 bit) operating system,
follow these steps to install the driver: 1.
Connect the USB cable between the host computer and the
radio. The system prompts the driver was installed unsuccessfully. 2.
Run Device Manager via right click My Computer -> System
Properties -> Hardware -> Device Manager. 3.
Select Other Devices then right click “CP2102
USB to UART Bridge Controller” and run Update Driver
Software. 4.
Choose Search automatically for updated driver software. 5.
Wait while the computer searches and updates the driver. |
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo
are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and
are used under license. All other trademarks are the property of their
respective owners. © 2011-2012 Motorola Solutions, Inc. All rights reserved.
Microsoft® and Windows® are registered trademarks of
Microsoft Inc.