        This table allows you to specify the transmit and receive freqencies 
    to be used on all the active channels in the current personality. 

        To make any channel 'receive only' you must blank out the 
    corresponding transmit freqency field - ie by using <F4>. 

        You may change the channel freqencies to any frequency within the 
    current waveband, ie VHF or UHF, but not from VHF to UHF or vice versa.  
    To do this you must select the new bandsplit on the 'Software 
    configuration' screen, <F7><F2> from the main menu.  Having re-specified 
    VHF or UHF you will not be able to save the personality to disk or 
    program a radio until all the frequencies are brought into line with 
    this specification. 



        The number of active channels in the current personality is 
    controlled from the 'Software Configuration' screen, <F7><F2> from the 
    main menu.  In this screen you have the oppotunity to convert the 
    personality to either 2 or 8 channel, converting to 8 channel will copy 
    all the data from the last active channel over the other channels upto 
    channel 8. 

        <F9> gives you the facility to duplicate data from one channel to 
    another, see help from the codeplug options screen for further 
    information on this. 

