     ^rHelp for Entry and Edit of Radio Codeplug Data^r
     
     On  this  screen  different  options  or  features can be selected and
     modified on the central screen area. Each line of information will  be
     presented as follows :
     
     <space><pointer><space><description><space><f1><space><f2><space>

     <space> : Space characters for separation. 

     <pointer>  :  This  is where the pointer will appear. The pointer will
     be shown as two characters thus : '->'. 




     <description> : This field will hold a description of the data  to  be
     edited.   If   this   field   describes   an   option   that   may  be
     enabled/disabled then it will be shown in reverse  video  to  indicate
     that  the  option is enabled (normal video if disabled). If the option
     cannot be  disabled (always present) then the description will  always
     be shown in reverse video. 

     <  f1  >,< f2 > : These fields are optional. If the line represents an
     option that can be enabled/disabled then these  fields  will  only  be
     shown  if  the  option  is  enabled,  i.e.  if  the  description field
     described above is shown in reverse. These fields show the  data  that
     can  be  edited. However, the keyword 'Table' will be shown if a table
     can be accessed. 



     The items on an option screen will normally be separated  by  a  blank
     line.  However,  mutually exclusive options will be shown as a 'block'
     ie the options will appear on  consecutive  lines.  The  block  itself
     will  be  separated from other items on the list by a blank line. When
     an option in a block is enabled then  any  previously  enabled  option
     will be automatically disabled. 

     It  is  possible  to  have the same data field(s) associated with more
     than one option. If the options are not mutually  exclusive  then  the
     data  fields  will  appear  beside each option, i.e. a data field will
     appear in more than one place on the screen. When one such data  field
     is  edited  then  all  other  occurrences  of it will be automatically
     updated when the new data has been entered. 



     Note that the data fields are shown only when  the  associated  option
     is  enabled. Hence, data fields associated with all options of a block
     will only appear beside the option that is enabled. 

     It may be possible to disable an option  by  editing  its  data  field
     e.g.   setting  a  data  field  to zero. Also, it may be impossible to
     disable an option. In such a situation the option description will  be
     shown  always  in  reverse  video and the data field(s) will always be
     displayed. 







     If an option requires more data fields, it is possible to  extend  the
     option  to the next line with additional data fields. In this case the
     description in the next  line  will  begin  with  four  dots  ....  to
     indicate  this  line  belongs to the option above. The additional data
     fields can be accessed by using the [Tab] or [Enter] key. Lines  which
     start  with  ....  in their description will always be shown in normal
     video and the option pointer will skip these lines. 









     When the pointer is moved to a new position then the first data  field
     at  that position will be opened for editing. Note however that if the
     line represents an option that may be enabled/disabled then  the  data
     field  will  only  be  opened for editing if/when the item is enabled.
     The [Tab], [Shift  Tab]  and  [Enter]  keys  will  move  between  data
     fields.  If,  however,  the  data field shows the keyword 'Table' then
     the ENTER key  will  result  in  the  associated  table  screen  being
     displayed. 

     Use  of  the  [Cur_dn]  key  when  the pointer is at the bottom of the
     screen will cause the screen to  scroll  up  to  accommodate  the  new
     position of the pointer. The converse will be true for [Cur_up]. 

                         * * *  END OF HELP TEXT  * * *
