  EMERGENCY CHANNEL REVERT


  This option Enables/Disables the Emergency Channel Revert feature.  If
  enabled, all emergency transmissions will be made on the Emergency Revert
  Channel determined by the channel number entered in the REVERT CHANNEL #
  option.  Once the emergency is initiated, all subsequent transmissions of
  any kind, emergency or regular PTT, will be on the revert channel.  Channel
  changes are inhibited, and for rotary version radios, the selector switch
  may not correspond to the channel that is in use.  Display version radios
  will display the correct channel but will not allow channel changes.  The
  only way to get off of the revert channel is to turn the radio off and
  on.  This takes the radio out of the revert mode, and the radio will
  function as normal.
                                                                <Page Down> 
.P
  EMERGENCY REVERT CHANNEL #


  This option is used to select the channel for emergency revert.  EMERG
  REVERT must be enabled for this option to be displayed.  The channel chosen
  must have a valid transmit frequency associated with it in the radio
  workspace.







                                                                  <Page Up> 
