  PER RADIO FEATURES


  The Per Radio Screen allows you to modify options that do not vary from
  channel to channel.  Use the Up/Down Arrow Keys to Enable/Disable.  Use
  the Numeric Keys to enter the channel number and time, or the Up/Down
  Arrow Keys to scroll through the values.

  ALL ALERT TONES - This option Enables/Disables alert tones for Time Out
  Timer, Power Up Alert Tone, Receive Only Channel, Transmit Inhibit on Busy
  Channel, and Priority Channel Detect.



                                                                <Page Down> 
.P
  POWER UP ALERT TONE - This option Enables/Disables the Power Up Alert Tone
  which, when enabled, beeps if the radio's software self-check indicates a
  good radio.  For this feature to function properly, the All Alert Tone
  feature must be enabled.

  QUIK CALL II AUTO RESET - This option Enables/Disables the Quik Call II
  Auto Reset.  If enabled, the radio will automatically reset back to the
  Quik Call II mode 7 seconds after the carrier drops.  If disabled, the
  monitor button must be pressed to reset the radio back into the Quik
  Call II mode.  This feature is not available on Model "A" MT1000 radios.

  CHANNEL BUSY LIGHT - This option, when enabled, will turn on the flashing
  green LED when a carrier is present on a receive PL channel, provided the
  mode select switch is in the PL position.
                                                  <Page Down>    <Page Up> 
.P
  TRANSMIT LIGHT - This option, when enabled, will turn on the red LED when
  the radio is in the transmit mode.  It also indicates when the battery
  voltage has fallen below a predetermined level while in transmit.

  BATTERY SAVER - This option, when enabled, conserves battery life by power-
  ing down the receiver and synthesizer for periods of 60 ms when no carrier
  is present.

  TALK BACK SCAN - This option, when enabled, will do the following:  If
  listening to a channel while in Scan Mode, or if in Scan Hang Time, press-
  ing the PTT will allow you to transmit on that channel.  When disabled,
  pressing the PTT will allow you to transmit on the Priority Channel, if
  the radio is in the Priority Scan Mode; or will transmit on the channel
  you were on before the radio went on into the Scan Mode.
                                                  <Page Down>    <Page Up> 
.P
  CLONING - This option, when enabled, allows you to clone from your radio
  to another radio.

  MVA DISPLAY FLIP - This option, when enabled, allows you to flip the dis-
  play when the radio is placed in a Convert-a-Com.

  DISPLAY FLIP - This option, when enabled, allows you to manually flip the
  display by simultaneously pressing the Channel Selector Controls on both
  sides of the display.

 
 
 

                                                  <Page Down>    <Page Up> 
.P
  TIME OUT TIMER - This option sets the length of time, in seconds, for which
  the radio is allowed to transmit.  The Time Out Timer duration settings
  range from 1 to 255 seconds. The Time Out Timer is Enabled/Disabled for a
  particular channel through the MAIN/CHANGE/PER-CHANNEL Screen (F6 in the
  MAIN/CHANGE Menu Screen).









                                                                  <Page Up> 
