^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
INSTRUCTION MESSAGES
50
IN01 { Clear instruction lines }
IN02 Select Function Key F1 - F10
IN03 Press Y to Exit                       Any Other Key to Continue
IN04 Press Y to Confirm Changes            Or N to Restore Old Values
IN05 Use Up / Down Arrow Keys to Select
IN06 Enter Path Name
IN07 Type in Desired Date in               MM/DD/YY Format then Press Enter
IN08 Select Function Key F1 - F10          Use PgUp / PgDn for Other Pages
IN09 Accept Current File Name or Type in   New File Name then Press Enter
IN10 Type in Desired Value                 Use Arrow Keys to Move Cursor
IN11 Press Any Key to Continue...
IN12 Enter Value Or Use Up / Down          Arrow Keys to Select
IN13 Type in Desired Value
IN14 Type in Desired Date in MM/DD/YY Form Or Use Up / Down Arrow Keys
IN15 Press Any Key to Return               to Previous Menu
IN16 Change Archive Path to Load OFP File
IN17 Unassigned Instruction Message
IN18 Enter FREQUENCY in MHz. Ex.:806.0125
IN19 Unassigned Instruction Message
IN20 Do You Really Want to Delete ?        Press Y or N.
IN21 Do You Really Want to Abort ?         Press Y or N.
IN22 Press Y to Confirm Changes            Or N to Discard Codeplug
IN23 Bad Serial #. Press Y to Continue     Editing or N to Discard Codeplug
IN24 Press Y to Continue Or N to Abort
IN25 Load System Key, Change Archive       Path, or attach FTR Key
IN26 Select Function Key F1 - F10          Press F3 to Continue Cloning
IN27 Press Y to Continue Or N to           Discard Codeplug
IN28 Press Y to Change Path Or N to Merge  Changes ...
IN29 Press Y to Reorder Systems or N to    Merge Changes ...
IN30 Unassigned Instruction Message
IN31 Unassigned Instruction Message
IN32 Unassigned Instruction Message
IN33 Unassigned Instruction Message
IN34 Unassigned Instruction Message
IN35 Unassigned Instruction Message
IN36 Unassigned Instruction Message
IN37 Unassigned Instruction Message
IN38 Unassigned Instruction Message
IN39 Unassigned Instruction Message
IN40 Unassigned Instruction Message
IN41 Unassigned Instruction Message
IN42 Unassigned Instruction Message
IN43 Unassigned Instruction Message
IN44 Unassigned Instruction Message
IN45 Unassigned Instruction Message
IN46 Unassigned Instruction Message
IN47 Unassigned Instruction Message
IN48 Unassigned Instruction Message
IN49 Unassigned Instruction Message
IN50 Unassigned Instruction Message
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
STATUS/ERROR MESSAGES
125
ST01  { Clear Status Lines }
ST02  Use Up / Down Arrow Keys              to Change Value.
ST03  Performing Communication Test         Please Wait ...
ST04  Communication is Successful
ST05  Path Does Not Exist
ST06  Archive File Not Found
ST07  Unrecognized Error Code
ST08  Value Typed in is Out of Range
ST09  Type Only Real Values
ST10  Type Only Integer Values
ST11  Do not Use Up / Down Keys
ST12  Communication Failure
ST13  Insufficient Disk Space
ST14  Status Line Color
ST15  Reading Inventory Numbers             Please Wait ...
ST16  Reading Codeplug                      Please Wait ...
ST17  Codeplug Read Complete
ST18  Codeplug Read Failed
ST19  Abort Request Acknowledged            Aborting Print ...
ST20  Not A Valid MTX-810 Codeplug File
ST21  Not A Valid Date
ST22  Programming Radio                     Please Wait ...
ST23  Programming Tracking Information      Please Wait ...
ST24  Programming Softpots                  Please Wait ...
ST25  At least one system must be trunked
ST26  Validating Model Change               Please Wait ...
ST27  Validating Codeplug                   Please Wait ...
ST28  Data was changed without Performing   The Merge Function ...
ST29  Only Full Programming Ensures         Complete Validation Corrections
ST30  There are no Trunked Systems to Merge Operation was aborted ...
ST31  The third digit from the left must Be 0 thru 3 Only ...
ST32  Disabled Call Alert Encode for all    Trunked Systems ...
ST33  Right Toggle Position Programmed to   Subfleet Dispatch ...
ST34  Unassigned Status Message
ST35  Programming Failed
ST36  Programming Complete
ST37  Programmed Tracking Information
ST38  Programmed Softpots
ST39  Disabled Subfleet Position C for      All Trunked Systems ...
ST40  Right Toggle Position Programmed to   Call Alert Encode ...
ST41  You do not Have Proper Authorization  to Delete Subfleet C Dispatch ...
ST42  Unassigned Status Message
ST43  Unassigned Status Message
ST44  Unassigned Status Message
ST45  Unassigned Status Message
ST46  Programmed Track Info and Sys Data
ST47  Unassigned Status Message
ST48  Reading from Archive Path             Please Wait ...
ST49  Reading Codeplug from Disk            Please Wait ...
ST50  Invalid codeplug file                 Press F10 to Exit
ST51  Reading from SAF Archive Path         Please Wait ...
ST52  No Files in Archive Path
ST53  Data File is Empty
ST54  Not a Valid Entry
ST55  Invalid File Name
ST56  Specify File Name Only
ST57  Writing Codeplug to Disk              Please Wait ...
ST58  WARNING: A System Key or Ftr Key      may be needed to Edit this Field
ST59  A System Key or Ftr Key may be        needed to perform this Operation
ST60  An OFP file is needed to Perform this Operation ...
ST61  Model Must be a Trunked Model to      Perform this Operation ...
ST62  Value Typed is Out of Range
ST63  Loading Overlay                       Please Wait...
ST64  Reorder Subfleet Selection must be    in the range A - B
ST65  Fatal Error Loading Overlay ...       Bad File.
ST66  Fatal Error Loading Overlay ...       File System Error.
ST67  Invalid Size Code
ST68  Cannot Copy to Same System
ST69  Enter Hexadecimal Values Only
ST70  The Range is 851.0125 to 869.9875     in steps of 0.0250
ST71  The Range is 806.0125 to 824.9875     in steps of 0.0250
ST72  Subfleet inconsistent with Size Code
ST73  Indiv Id inconsistent with Size Code
ST74  Unexpected End of File Occurred
ST75  Validating Radio Serial Numbers       Please Wait ...
ST76  Squelching Radio                      Please Wait ...
ST77  Unsquelching Radio                    Please Wait ...
ST78  Your Radio has been DEKEYED while     you changed the Frequency
ST79  Softpot is set to the Maximum Value
ST80  Timer Expired                         Your Radio has been DEKEYED
ST81  CVC Sense Line is Ungrounded          Please Ground this Line
ST82  CVC Sense Line is Grounded            Please Unground this Line
ST83  Reading Radio Model Number            Please Wait ...
ST84  Reading Radio Software Version        Please Wait ...
ST85  Reading Radio Serial Number           Please Wait ...
ST86  Help File Does Not Exist
ST87  Help File Format Error                Cannot Access Help Text
ST88  Help Not Available                    For This Field
ST89  End of Help File Reached
ST90  Duplicate Entries Detected            System Numbers should be unique
ST91  Duplicate Entries Detected            Subfleets should be unique
ST92  Duplicate Entries Detected            Channel Numbers should be unique
ST93  Cannot Copy to Same Channel
ST94  This operation will destroy the last  TRUNKED SYSTEM present
ST95  New Call Alert Id will be calculated
ST96  Fleet inconsistent with Size Code
ST97  Bad Serial Number
ST98  Bad or Missing OFP File
ST99  You Should Read a Codeplug Before     You Select This Option
ST100 Size Code must be A - K, M, O, or Q
ST101 Channel Frequencies are               updated to reflect new Channel Type
ST102 The Range is 851.0000 to 869.9750     in steps of 0.0250
ST103 The Range is 806.0000 to 824.9750     in steps of 0.0250
ST104 Your FTR KEY is still connected ...
ST105 Valid System Key File
ST106 Bad System Key File
ST107 A System Key or FTR Key is Needed     to Perform this Operation
ST108 A System Key File or FTR Key is Neededto Delete this Trunked System
ST109 A System Key File or FTR Key is Neededto Add a Trunked System
ST110 An Authorization Source is Needed     to Perform this Operation
ST111 Call Alert Id cannot be calculated    Size Code, Flt, Ind Id inconsistent
ST112 OFP File Loaded
ST113 Mismatch in Model Numbers
ST114 Only OFP Files can be Printed
ST115 Bad OFP File
ST116 Invalid Model or Serial Number        Codeplug Discarded
ST117 Codeplug Discarded
ST118 Reorder Subfleet Selection must be    in the range A - C
ST119 Unassigned Status Message
ST120 Unassigned Status Message
ST121 Unassigned Status Message
ST122 Unassigned Status Message
ST123 Unassigned Status Message
ST124 Unassigned Status Message
ST125 Unassigned Status Message
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
POPUP MESSAGES
PP01



        Communication with radio has failed due to
                    > PARITY ERROR <



2
PP02


         Communication with radio has failed due to
                     > NO RESPONSE <

         Check that the radio is turned on and the
         RIB-to-radio cable is connected.

2
PP03


  Radio did not give complete response in time
           > INNER-BYTE DELAY ERROR <

  Try your last command again.


2
PP04


  Failed to receive valid response from radio due to
               > CHECKSUM ERROR <

  Try your last command again.


2
PP05


    Communication with radio has failed due to
                > POWER FAULT <
    Check that the RIB power cord is plugged in and
    the RIB-to-computer cable is connected.Check that
    the radio is turned on.

2
PP06


  Communication with radio has failed due to
           > BUS COLLISION ERROR <

          Try your last command again.


2
PP07


  Communication with radio has failed due to
             > BUS BUSY ERROR <

  Try your last command again.  If this error continues
  check the test-set; make sure it is not in AIR TEST.

2
PP08



          > NACK ERROR <

  Try your last command again.


2
PP09


  Programming failed due to
      > NO-PROG ERROR <

  Try your last command again.  If this error continues
  a technician should examine the codeplug hardware.

2
PP10


            UNRECOGNIZED ERROR

  Report the conditions leading to this to Trunked
  Portable Products.  Try your last command again.


2
PP14

                          WARNING
                          ÄÄÄÄÄÄÄ
        A Serial Number mismatch has been detected.
        The Serial Number to be programmed is :
        The Serial Number of the radio     is :
        Do you still wish to program the radio ?

1
PP15

                          FATAL ERROR
                          ÄÄÄÄÄÄÄÄÄÄÄ
     Memory Allocation Failure occurred. Please abort the
     the program and ensure that you have a system configured
     with 640 Kb of RAM. Also, no co-resident programs should
     exist prior to execution of this program.

4
PP16

                          WARNING
                          ÄÄÄÄÄÄÄ

        The specified file already exists and will
        be overwritten should you choose to continue


2
PP17

                          ERROR
                          ÄÄÄÄÄ

        The Overlay System files were not Found...
        Please insert the System Files Diskette in
        the boot drive or reload the files onto the
        hard disk.
1
********************************************************************************
                              NOTE
       Use the following format to define validation error messages

                Line 1 - IV<error_code>
                Line 2,
                Line 3 - [<alphanum> [display_var] ,,,]
                Line 4,
                Line 5 - [<alphanum>]


       Also note that in the Error details box, program variables may
       be displayed, using the terminal symbol '#'. The reduction rule
       is as follows :

                display_var = # <prog_var>
                prog_var    = <format_type> <var_no> <format>
                format_type = <i | r | s >
                var_no      = <1..max_vars>
                format      = for format_type = 'i',
                                <x [x] ,,,>

       Right now, only format_type 'i' (for integer variables is implemented.
       Others are for future expansion. For eg., see IV41.
                                                         ..... MADS - 08-21-89
********************************************************************************
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx!yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy!zzzzz
xxxxxxxxxxxxxxxxxxxxxxxxxxx!yyyyyyyyyyyyyyyyyyyyyyyyyy!zzzzzzzzzzzzzzzzzzzzzzzzz
IV01
Invalid Radio Software Version       number

Codeplug discarded

IV02
The codeplug is blank

1. Enter new Model and        Serial information OR   2. Discard Codeplug

IV03
Invalid Codeplug Version

Codeplug discarded

IV04
Invalid Serial Number detected

1. Enter new Serial           information OR          2. Discard codeplug

IV05
Unrecognized Model Number

1. Enter new Model            information OR          2. Discard codeplug

IV06
Invalid Programming Source detected

Ignored

IV07
Invalid Programming Date detected

Ignored

IV08
Mismatch between Radio Software      Version and Model Number

1. Enter new Model            information OR          2. Discard codeplug

IV09
Bad checksum detected in alignment   data

Alignment data replaced    with default values

IV10
Bad reserved values detected

Corrected

IV11
Incorrect alignment value detected

Set to default value

IV12
Bad checksum detected in Switch data

Switch data set to default values for this model

IV13
Incorrectly programmed switches      detected

Corrected

IV14
Incorrectly programmed keypad        selection detected

Corrected

IV15
Conventional only model with a       trunked system in System #i1x

System set to Unused

IV16
Bad checksum detected in System #i1x

System set to Unused

IV17
Bad checksum detected in System #i1x,   Channel #i2x

Channel disabled

IV18
Incorrect number of systems detected for this model

Corrected

IV19
Incorrect Guarded System data value  detected for System #i1x

System set to Unused

IV20
Failsoft disabled but incorrect      Failsoft Frequency detected in
       System #i1x
Set to default value

IV21
Incorrect Universal System ID Pointervalue detected for System #i1x

Set to default value

IV22
Incorrect System Access value        detected for System #i1x

Set to default value

IV23
Incorrect trunking Timeout Timer     value detected for System #i1x

Set to default value

IV24
Incorrect number of subfleets enabledfor System #i1x

Subfleet disabled

IV25
Incorrect value of ISW Retry Delay   detected in System #i1x

Corrected

IV26
Out-of-range transmit or receive     frequency in System #i1x, Channel #i2x

Corrected

IV27
Mismatch between tranmsit and receivefrequencies in System #i1x, Channel #i2x

Corrected

IV28
Incorrect conventional Timeout Timer value detected for System #i1x,
         Channel #i2x

Set to default value

IV29
Incorrect squelch code value detectedfor System #i1x, Channel #i2x

Set to default value

IV30
Incorrect number of channels enabled in System #i1x

Channel disabled

IV31
Incorrect value of Call Alert        detected in System #i1x

Set to default value

IV32
Incorrect phone value detected in    System #i1x

Set to default value

IV33
Inconsistent setting for Hot Keypad  in System #i1x, Channel #i2x

Corrected

IV34
At least one trunked system must be  defined for this model

Ignored

IV35
Incorrect setting(s) of Reverse BurstBypass in System #i1x

Set to Disabled

IV60
A trunked system was found in the   codeplug data to be programmed. No trunked
system should be defined for this model
Programming aborted

IV61
No trunked system was found in the   codeplug data to be programmed.
      Atleast one trunked system should be defined for this model
Programming aborted

IV62
The Radio Software Version Number of the radio and the Model Number to be
 programmed are inconsistent
Programming aborted

IV63
The codeplug is blank.  Only full    programming can restore the codeplug

Programming aborted

IV64
The serial number of the radio does  not match the serial number to be
    programmed
Programming aborted

IV65
The model number in the OFP file doesnot match the model number to be
     programmed
Programming aborted

IV66
The model number of the radio does   not match the model number to be
     programmed
Programming aborted

IV67
The trunked systems to be programmed do not match the trunked systems
 in  the OFP file.  The radio will not be consistent with TCMS
Warning

IV68
The trunked systems in the OFP file  do not match the trunked systems
 to  be programmed.  The radio will not beconsistent with TCMS
Warning

IV69
The trunked systems to be programmed that have an authorization source of
 either radio or disk or rss do not   match the trunked systems in the     radio
Programming aborted

IV70
The trunked systems to be programmed do not match the trunked systems in
  the radio. An authorization source isneeded to program the radio
Programming aborted

IV71
Communication with radio has         failed

Programming aborted

********************************************************************************