^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
INSTRUCTION MESSAGES
50
IN01 { Clear instruction lines }
IN02 Select Function Key F1 - F10
IN03 Press Y to Exit                       Any Other Key to Continue
IN04 Press Y to Confirm Changes            Or N to Restore Old Values
IN05 Use Up / Down Arrow Keys to Select
IN06 Enter Path Name
IN07 Type in Desired Date in               MM/DD/YY Format then Press Enter
IN08 Select Function Key F1 - F10          Use PgUp / PgDn for Other Pages
IN09 Accept Current File Name or Type in   New File Name then Press Enter
IN10 Type in Desired Value                 Use Arrow Keys to Move Cursor
IN11 Type in Desired Address               from 000 to 1FF (Hex)
IN12 Enter Value Or Use Up / Down          Arrow Keys to Select
IN13 Type in Desired Value
IN14 Type in Desired Month from $00 to $FF Or Use Up / Down Arrow Keys
IN15 Type in Desired Day from $00 to $FF   Or Use Up / Down Arrow Keys
IN16 Type in Desired Year from $00 to $FF  Or Use Up / Down Arrow Keys
IN17 Type in Fill Value from $00 to $FF
IN18 Enter FREQUENCY in MHz. Ex.:806.0125
IN19 Select Function F10
IN20 Do You Really Want to Delete ?        Press Y or N.
IN21 Do You Really Want to Abort ?         Press Y or N.
IN22 Press Y to Confirm Changes            Or N to Discard Codeplug
IN23 Bad Serial #. Press Y to Continue     Editing or N to Discard Codeplug
IN24 Press Y to Continue Or N to Abort
IN25 Press Y to Continue Or N to           Discard Codeplug.
IN26 Select Function Key F1 - F10, ESC,    PGUP or PGDN
IN27 Load System Key, Change Archive       Path, or attach FTR Key
IN28 Select Function Key F1 - F10          Press F3 to Continue Cloning
IN29 Unassigned Instruction Message
IN30 Unassigned Instruction Message
IN31 Unassigned Instruction Message
IN32 Unassigned Instruction Message
IN33 Unassigned Instruction Message
IN34 Unassigned Instruction Message
IN35 Unassigned Instruction Message
IN36 Unassigned Instruction Message
IN37 Unassigned Instruction Message
IN38 Unassigned Instruction Message
IN39 Unassigned Instruction Message
IN40 Unassigned Instruction Message
IN41 Unassigned Instruction Message
IN42 Unassigned Instruction Message
IN43 Unassigned Instruction Message
IN44 Unassigned Instruction Message
IN45 Unassigned Instruction Message
IN46 Unassigned Instruction Message
IN47 Unassigned Instruction Message
IN48 Unassigned Instruction Message
IN49 Unassigned Instruction Message
IN50 Unassigned Instruction Message
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
STATUS/ERROR MESSAGES
125
ST01  { Clear Status Lines }
ST02  Use Up / Down Arrow Keys              to Change Value.
ST03  Performing Communication Test         Please Wait ...
ST04  Communication is Successful
ST05  Path Does Not Exist
ST06  Archive File Not Found
ST07  Unrecognized Error Code
ST08  Value Typed in is Out of Range
ST09  Type Only Real Values
ST10  Type Only Integer Values
ST11  Do not Use Up / Down Keys
ST12  Communication Failure
ST13  Insufficient Disk Space
ST14  Status Line Color
ST15  Reading Inventory Numbers             Please Wait ...
ST16  Reading Codeplug                      Please Wait ...
ST17  Codeplug Read Complete
ST18  Codeplug Read Failed
ST19  Abort Request Acknowledged            Aborting Print ...
ST20  Not A Valid MTX-820/888/S             Codeplug File
ST21  Not A Valid Date
ST22  Programming Radio                     Please Wait ...
ST23  Bad Serial Number
ST24  Programming Softpots                  Please Wait ...
ST25  unassigned message
ST26  Performing Model Changes              Please Wait ...
ST27  Validating Codeplug                   Please Wait ...
ST28  unassigned message
ST29  Only Full Programming Ensures All     Validation Corrections
ST30  Disabled AMSS for all Trunked Systems
ST31  Disabled Phone for all Trunked        Systems
ST32  Disabled Ans Only Phone for all       Trunked Systems
ST33  Disabled Pvt Call Answer for all      Trunked Systems
ST34  Bottom Push Button programmed to      AMSS Lock & Search
ST35  Programming Failed
ST36  Programming Complete
ST37  Programmed Copyright Block
ST38  Programmed Softpots
ST39  Only Full Programming Ensures All     Model # Change Corrections
ST40  System Key File is now Missing
ST41  unassigned message
ST42  Patch Area has been updated to the    most current patch available
ST43  Invalid Patch version detected....    Replaced with valid patch
ST44  Bottom Push Button programmed to      Phone
ST45  Bottom Push Button programmed to      Answer only Phone
ST46  Programmed All Systems
ST47  Bottom Push Button programmed to      Private Call Answer
ST48  unassigned message
ST49  Reading Codeplug from Disk            Please Wait ...
ST50  Invalid codeplug file                 Press F10 to Exit
ST51  Reading Directory                     Please Wait ...
ST52  No Files in Archive Path
ST53  Data File is Empty
ST54  Not a Valid Entry
ST55  Invalid File Name
ST56  Specify File Name Only
ST57  Writing Codeplug to Disk              Please Wait ...
ST58  WARNING: A System Key, Ftr Key or SAF may be needed to Edit this Field
ST59  unassigned message
ST60  Talk Group must be Enabled to be an   Announcement Group ...
ST61  Enter Hexadecimal Values Only         Range is 1..FFFE
ST62  Value Typed is Out of Range
ST63  The Range is 0.000 to 32.674          in steps of 1.054
ST64  The Range is 0.000 to 31.605          in steps of 2.107
ST65  The Range is 46.67 to 209.98          in steps of 23.33
ST66  The Range is 0.0 to 25.5              in steps of 0.1
ST67  The Range is 0.0000 to 819.1875       in steps of 0.0125
ST68  Cannot Copy to Same System
ST69  Enter Hexadecimal Values Only
ST70  The Range is 851.0125 to 869.9875     in steps of 0.0250
ST71  The Range is 806.0125 to 824.9875     in steps of 0.0250
ST72  The Range is 0..0FFF (hex)            and DISABLED
ST73  The Range is 0.000 to 349.95          in steps of 23.33
ST74  Unexpected End of File Occurred
ST75  Validating Radio Serial Numbers       Please Wait ...
ST76  Squelching Radio                      Please Wait ...
ST77  Unsquelching Radio                    Please Wait ...
ST78  Your Radio has been DEKEYED while     you changed the Frequency
ST79  Softpot is set to the Maximum Value
ST80  Timer Expired                         Your Radio has been DEKEYED
ST81  CVC Sense Line is Ungrounded          Please Ground this Line
ST82  CVC Sense Line is Grounded            Please Unground this Line
ST83  Reading Radio Model Number            Please Wait ...
ST84  Reading Radio Software Version        Please Wait ...
ST85  Reading Radio Serial Number           Please Wait ...
ST86  Help File Does Not Exist
ST87  Help File Format Error                Cannot Access Help Text
ST88  Help Not Available                    For This Field
ST89  End of Help File Reached
ST90  Duplicate Entries Detected            System Numbers should be unique
ST91  This operation will destroy the last  TRUNKED SYSTEM present
ST92  Duplicate Entries Detected            Channel Numbers should be unique
ST93  Cannot Copy to Same Channel
ST94  Only One Talk Group can be an         Announcement Talk Group
ST95  New Call Alert Id will be calculated
ST96  Loading Overlay                       Please Wait...
ST97  Fatal Error Loading Overlay ...       File System Error.
ST98  Bad or Missing System Authorization   File
ST99  Fatal Error Loading Overlay ...       Bad File.
ST100 Invalid Switch Settings...
ST101 Control Channel Frequencies are       updated to reflect new Channel Type
ST102 Invalid Frequency Entered For The     Current Frequency Type Parameters
ST103 Enter Frequencies in Mhz              example : 864.0125
ST104 Reorder Subfleet Selection must be    in the range A - F
ST105 The Range is 000 to 3FF               in steps of 1
ST106 Type only Hex values
ST107 Selection must be in the Talk Group   List.
ST108 Invalid Size Code
ST109 Fleet Inconsistent with Size Code
ST110 Subfleet Inconsistent with Size Code
ST111 Indiv Id Inconsistent with Size Code
ST112 Error Loading System Key File...
ST113 Mismatch in Model Numbers
ST114 A System Key, Ftr Key or SAF is       Needed to Delete a Trunked System
ST115 A System Key, Ftr Key or SAF is       Needed to Add a Trunked System
ST116 A System Key, Ftr Key, or SAF is      Needed to Perform This Operation
ST117 At least one system must be trunked
ST118 Your FTR KEY is still connected...
ST119 Low Battery Calibration was           successful.
ST120 Low Battery Calibration was           unsuccessful. Try Again.
ST121 You Should Read a Codeplug Before     You Select This Option
ST122 The Model Number in the SAF file      Does not match the model selected
ST123 A System Key or Ftr Key is Needed     to Perform This Operation
ST124 Valid System Key File..
ST125 Bad System Key File....
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
POPUP MESSAGES
2
PP01



        Communication with radio has failed due to
                    > PARITY ERROR <



2
PP02


         Communication with radio has failed due to
                     > NO RESPONSE <

         Check that the radio is turned on and the
         RIB-to-radio cable is connected.

2
PP03


  Radio did not give complete response in time
           > INNER-BYTE DELAY ERROR <

  Try your last command again.


2
PP04


  Failed to receive valid response from radio due to
               > CHECKSUM ERROR <

  Try your last command again.


2
PP05


    Communication with radio has failed due to
                > POWER FAULT <
    Check that the RIB power cord is plugged in and
    the RIB-to-computer cable is connected.Check that
    the radio is turned on.

2
PP06


  Communication with radio has failed due to
           > BUS COLLISION ERROR <

          Try your last command again.


2
PP07


  Communication with radio has failed due to
             > BUS BUSY ERROR <

  Try your last command again.  If this error continues
  check the test-set; make sure it is not in AIR TEST.

2
PP08



          > NACK ERROR <

  Try your last command again.


2
PP09


  Programming failed due to
      > NO-PROG ERROR <

  Try your last command again.  If this error continues
  a technician should examine the codeplug hardware.

2
PP10


            UNRECOGNIZED ERROR

  Report the conditions leading to this to Trunked
  Portable Products.  Try your last command again.


2
PP11

                          WARNING
                          ÄÄÄÄÄÄÄ

                You should read a codeplug before
                you choose this option.



PP12

                          WARNING
                          ÄÄÄÄÄÄÄ

            This codeplug contains bits with inconsistent
            values. This MAY affect the operation of the
            radio. Do you want to correct these bits ?

5
PP13

                          WARNING
                          ÄÄÄÄÄÄÄ


            The codeplug you have just read is BLANK !


3
PP14

                          WARNING
                          ÄÄÄÄÄÄÄ
        A Serial Number mismatch has been detected.
        The Serial Number to be programmed is :
        The Serial Number of the radio     is :
        Do you still wish to program the radio ?

1
PP15

                          FATAL ERROR
                          ÄÄÄÄÄÄÄÄÄÄÄ
     Memory Allocation Failure occurred. Please abort the
     the program and ensure that you have a system configured
     with 640 Kb of RAM. Also, no co-resident programs should
     exist prior to execution of this program.

4
PP16

                          WARNING
                          ÄÄÄÄÄÄÄ

        The specified file already exists and will
        be overwritten should you choose to continue


1
PP17


                         WARNING
                         ÄÄÄÄÄÄÄ
         Programming completed, but unable to program
         a global dynamic block. The codeplug  EEPROM
         is bad and needs to be replaced.  Do not use
         the radio until this has been corrected.

2
PP18

                          ERROR
                          ÄÄÄÄÄ

        The Overlay System files were not Found...
        Please insert the System Files Diskette in
        the boot drive or reload the files onto the
        hard disk.

1
PP19

                          WARNING
                          ÄÄÄÄÄÄÄ
    The patch file for the current radio software version
    was not found......Press F2 to continue without patch
    replacement or load correct patch file in the boot
    directory.

1
PP20

                          WARNING
                          ÄÄÄÄÄÄÄ

      An invalid Srecord patch file was found...
      Press F2 to continue without patch replacement,
      or reload the patch files.

1
PP21

                         WARNING
                         ÄÄÄÄÄÄÄ
   The codeplug contains a trunked system that was not
   found in the SAF.  Programming the current codeplug
   into the radio will cause an inconsistency with TCMS.
   Press F2 to continue or F10 to abort programming and
   edit the system data to match the SAF.

1
PP22

                         WARNING
                         ÄÄÄÄÄÄÄ
  The SAF contains a trunked system that was not found in
  the current codeplug.  Programming the current codeplug
  into the radio will cause an inconsistency with TCMS.
  Press F2 to continue or F10 to abort programming and edit
  the system data to match the SAF.

1
PP23

                          ERROR
                          ÄÄÄÄÄ
  The RSS has just fucked you up the butt!  It is hosed
  totally and you will NOT be able to use it.  Insert another
  quarter and try again.  Ouch!  Sorry, dude.  Reinstall the
  disks and try again, or give up and never program radios
  again.

1
********************************************************************************
                              NOTE
       Use the following format to define validation error messages

                Line 1 - IV<error_code>
                Line 2,
                Line 3 - [<alphanum> [display_var] ,,,]
                Line 4,
                Line 5 - [<alphanum>]


       Also note that in the Error details box, program variables may
       be displayed, using the terminal symbol '#'. The reduction rule
       is as follows :

                display_var = # <prog_var>
                prog_var    = <format_type> <var_no> <format>
                format_type = <i | r | s >
                var_no      = <1..max_vars>
                format      = for format_type = 'i',
                                <x [x] ,,,>

       Right now, only format_type 'i' (for integer variables is implemented.
       Others are for future expansion. For eg., see IV41.
                                                         ..... MADS - 08-21-89
********************************************************************************
        10        20        30        40        50        60        70        80        90        100       110       120       130       140       150        160       170       18
....+....|....+....|....+....|....+....|....+....|....+....|....+....|....+....|....+....|....+....|....+....|....+....|....+....|....+....|....+....|....+.....|....+....|....+....|
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx!yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy!zzzzz
xxxxxxxxxxxxxxxxxxxxxxxxxxx!yyyyyyyyyyyyyyyyyyyyyyyyyy!zzzzzzzzzzzzzzzzzzzzzzzzz
IV01
Invalid Radio Software Version.

Codeplug discarded.

IV02
The portion of the codeplug inside   the microcomputer is blank.

1. Enter new Model and        Serial information  OR  2. Discard Codeplug

IV03
The portion of the codeplug outside  the microcomputer is blank.

All systems set to unused.

IV04
Invalid Codeplug Version.

Codeplug discarded.

IV05
Invalid Serial Number detected.

1. Enter new Serial Number    information OR          2. Discard codeplug

IV06
Unrecognized Model Number.

1. Enter new Model Number     information OR          2. Discard codeplug

IV09
Incorrect Global Dynamic Block       Pointer value detected.

Set to default value.

IV10
Bad Reserved Values detected.

Corrected.

IV11
Bad checksum detected in alignment   data.

Alignment data replaced    with default values.

IV13
Bad checksum detected in             Switch Data.

Switch Data set to default values for this model.

IV14
Incorrectly programmed switches      detected.

Corrected.

IV15
Incorrectly programmed keypad        selection detected.

Corrected.

IV18
Incorrect Personality Block vector   values detected.

Set to default values.

IV19
Bad checksum detected in             Patch Block.

Set to default values,     updated, or replaced.

IV20
Patch file size exceeds patch area.

Set to default values,     updated, or replaced.

IV21
Invalid Global Dynamic Block format  detected.

Set to default values.

IV22
Bad checksum detected in Global      Dynamic data.

Global Dynamic data        replaced with default      values.

IV26
Invalid Personality block format     detected for system #i1x.

System set to unused.

IV27
Bad checksum detected in System #i1x.

Systemd set to unused.

IV28
Bad checksum detected in System #i1x,   Channel #i2x.

Channel disabled.

IV29
Invalid Talk Group List block format detected for system #i1x.

System set to unused.

IV30
Bad checksum detected in Talk Group  List for system #i1x.

System set to unused.

IV31
Invalid Dynamic system block format  detected for system #i1x.

Set to default values.

IV32
Bad checksum detected in the Dynamic System Data for system #i1x.

Dynamic System data        replaced with default      values.

IV81
No trunked system was found in the   codeplug data to be programmed.  At
  least one trunked system should be   defined for this model.
Programming aborted.

IV82
Invalid Radio Software Version.

Programming Aborted.

IV83
The codeplug portion inside and/or   outside the microcomputer is blank.
  Only full programming can restore    the codeplug.
Programming Aborted.

IV84
The serial number of the radio does  not match the serial number of the   radio
 to be programmed.
Programming Aborted.

IV85
The model number of the SAF does not match the model number to be         progra
mmed.
Programming Aborted.

IV86
The model number of the radio does   not match the model number to be     progra
mmed.
Programming Aborted.

IV87
The model number of the radio and    the model number to be programmed    are
 incompatible.
Programming Aborted.

IV90
A trunked system to be programmed    that has an authorization source of  either
 radio or disk does not match  a trunked system in the radio.
Programming Aborted.

IV91
The trunked systems in the radio do  not match the trunked systems to be  progra
mmed.  An authorization source is needed to program the radio.
Programming Aborted.

IV92
Communication with the radio has     failed.

Programming Aborted.

IV93
Incompatible codeplug version        numbers.

Programming aborted.

IV94
The RSS has been corrupted.          Reinstall the RSS from the floppy    disks.



********************************************************************************
/