^rHelp for Global Incompat Checks^r

The field programmer supports blank data fields for options which can be
modified by Trakmode. If there are blank data fields both per radio and per
Trakmode, then an error message is generated to advise that the option will be
deleted because of lack of data.
The deletion of one option for this reason, may result in another option
becoming incompatible. Then the error message is repeated advising that this
option will be deleted because of lack of data. (in this case lack of data
causes lack of option). If the option is required remain on the option screen
and re-edit in order to make the option setting compatible.
Detailed information about the incompatibilities and the requirements of each
option are available in the option specific help. Go to the option and press
F1 for help.


All channel reverting data are then checked again:

   - Check channels with PTT Monitor, if a DECODE CODE or PL DECODE is
     present.

   - Check if a H368 Shortcall Alphanumeric entry reverts to a non existing
     zone or channel.
     Check if a H368 Shortcall Alphanumeric entry reverts to an authorization
     channel or to a receive only channel.

   - Check if H923 Emergency on programmed channel reverts to a non existing
     zone or channel.
     Check if H923 Emergency on programmed channel reverts to an authorization
     channel or to a receive only channel.


   - Check if Auto Acknowledge Revert channel reverts to a non existing zone
     or channel.
     Check if Auto Acknowledge Revert channel reverts to an authorization
     channel or to a receive only channel.


If H368 Shortcall Alphanumeric or H369 Programmable Numeric Shortcall is
enabled then all channels will be checked for an existing UNITID code,
because these options cannot work correctly without a valid code.


If H685 Manual & Automatic Repeater is enabled and both H693 RAT X Tone sel.
and Std. Call Code is enabled then all channels will be checked for a variable
RAT code and Call code on the same channel, because the radio is not able to
handle this. If both variable codes are required on the same channel then you
have to disable Manual & Automatic RAT on this channel on the trakmode table.
Finally the following options are checked again against H924 Encode Only,
H642 Decode Only and H809 Omit 5 Tone Encode/Decode:

- Error Messages will warn of the loss of the following options:

     when option H924 Encode only is selected:
                        - H632 Authorization
                        - H684 End of message tone

     when option H642 Decode only is selected:
                        - H629 Omit Decode Alert Tones
                        - H632 Authorization
                        - Single Tone All Call

     when option H809 Omit 5 Tone Encode/Decode is selected:
                        - H623 Emergency Encode Lockout
                        - H629 Omit Decode Alert Tones
                        - H632 Authorization
                        - H684 End of message tone
                        - H695 Non std. repeat tone
                        - H746 Extended first tone enc/dec
                        - Single Tone All Call

                 * * *  END  OF  HELP  TEXT  * * *
