
                OUT OF BAND PROGRAMMING FOR THE HT600/MT1000
   ______________________________________________________________________
                                      
   Programming frequencies outside of the normal bandsplit in these
   radio's is quite easy. All you need is a saved file and a HEX editor.
   
   Enter a frequency you will recognize in RSS into the location you want
   to change. Save the file and load the saved file from your radio into
   the hex editor. Locate the frequency you want to change (its in plain
   ASCII) and replace it with the frequency you want (make sure you edit
   the ASCII portion) and save the file. Load the file in RSS and program
   it into the radio.
   
   NOTE: Do not view the channel you hacked while in RSS. This will cause
   the program to automatically correct the out of band frequency to
   something inside the band limits. If you do view the hacked
   channel(s), all the other changes you made will have to be done over
   again, because you will have to reload the file from disk or re-read
   the radio if you want your frequencies to be there when you program
   the radio. So don't look at the channel(s) you changes, you won't see
   anything useful.
   ______________________________________________________________________
                                      
   If you have any questions, email me and I'll try to help.
   
   Home
   
   Go to GeoCities
