===========================================================

 SOFTWARE RELEASE NOTE

===========================================================

Product  : Professional GP600/GP1200 Series FlashGrade Tool
KIT No   : ENVN4018N
Release  : R02.00.20
Date     : 01-Jun-2001
Language : English

CAUTION: APPLICATION DATA WILL NOT BE KEPT if upgrading
         a radio with software version R01.xx.xx.
         To keep the application data, read the radio with 
	 the CPS before upgrading and write back data after
	 upgrade is done. (CPS R00.02.00 or newer)

===========================================================

 Purpose of this release

===========================================================

Supported features:

- Reading Radio information

- Upgrade a radio to software version R02.00.20 from
  previous released versions with hardware codeplug update
  and saving of tuning data, switches off microprocessor
  clock shift

- GP640/680 and GP1280 models supported in one tool.

- CAUTION: APPLICATION DATA WILL NOT BE KEPT if upgrading
  any radio with software version R01.xx.xx.
  To keep the application data, read the radio with the CPS
  before upgrading and write data back after upgrade is done.

Supported Software versions:

- Only official radio software release version and bands.
  In this version:
  R01.02.00 .. R01.02.07, R01.03.03 .. R01.03.01, R02.00.08,
  R02.00.13, R02.00.15, R02.00.16, R02.00.17
  software is updated to version R02.00.20.
  codeplug is updated for all versions with clock shift 
  switched off.

===========================================================

 How to install and run this software

===========================================================

Installation of the software is not necessary. The software
can either be started directly on a floppy disk or on a hard
disk by calling the UpgradeTool.exe file. All files of this
release must be copied to the same directory.

For the usage of this software the following radio accessories
are required:

(A) - Flash adapter, P/N HLN9742
    and (i)
    - Radio Interface Box, P/N RLN4008
      with battery or power supply
    - RIB to PC cable, P/N 3080369B72 (9pin) or 3080369B71 (25pin)
    - Programming/test cable, P/N RKN4074
    or  (ii)
    - RIBless programming cable, P/N RKN4075

    By using equipment (i) the Flash adapter has to be connected 
    beetween the Radio Interface Box and the Programming/test cable.
    Maximum baud rate for this equipment is 19,200 Bd.

    By using eqipment (ii) the Flash adapter has to be connected
    beetween the PC and the RIBless programming cable.

    For Flash Adapter HLN9742B, "Flash mode on" means switch 
    position "A", position "B" is not used for portable radios.

or

(B) - Vehicle Adapter EN1006, EN1007 or EN1008
    - Service cable ENLN4002

    "Flash Adapter Switch OFF" means ENLN4002 switch to "Radio 
    Service", "Flash Adapter Switch ON" means switch to "Radio
    Flash". Maximum baud rate for this equipment is 19,200 Bd.

    Removing the power supply or battery means for vehicle adapter:
    Switch radio off, take radio out of the vehicle adapter, remove
    and re-attach battery, insert radio into vehicle adapter again
    and then turn the radio on.

===========================================================

 Radio Software Release Note

===========================================================

PRODUCT: WARIS MPT GP640/GP680/GP1280 

VERSION: R02.00.20

DATE OF BUILD : 25-May-01

Affected Models :

All GP640/680/1280 Preferred, Prime and Popular models.
Does not support Mobile radios.

===========================================================

 Associated Software

===========================================================

CODEPLUG COMPATIBILITY: Release R02.00.20.
CPS COMPATIBILITY: Phase 3 CPS only (R00.02.10)

===========================================================

 New Features / Notes

===========================================================

NEW FEATURES :-

- ENABLE MAP27 FOR ALL PORTABLE & MOBILE RADIO MODELS
  MAP27 has been enabled for all radio models for both MPT and
  Conventional personalities. This feature was previously only
  available for the GP1280 however it is now available for the
  GP640 & GP680 radio models. 
  The radios have the full functionality of the MAP27 protocol.
  This firmware must be used with the CPS R00.02.10 to enable MAP27.


FIXES THE FOLLOWING ISSUES :-

- GCC 6997093 
  Wrong Talkgroup Selected for GP640
  GP640 in Talkgroup mode will not select the correct group when it
  switches from convetional mode to MPT1327 Talkgroup Select mode.
  The radios are used in convetional mode and have several channels.
  When the GP640 rotary switch is in position 2 (2nd switch position)
  and the radio changes from Conventional mode to MPT1327 talkgroup
  mode the radio will not select and send the correct group call
  assigned to the 2nd switch position when the PTT is pressed.
  If the first position is programmed for group 900 and 2nd position
  is programmed for 901 the radio will send 900 instead of 901 when is
  switches from conventional mode to MPT1327 Talkgroup mode.
