;===============================================================================
; ASPEED Graphics Linux XFree86/XORG Driver RPM Package Release Notes
;===============================================================================
v.0.97.05: ycchen@010713
01.[New] [AST2300/2400] Support ITE66121, ycchen@010413
02.[Bug] [AST2300/2400] Modify DRAM Settings by H/W Request
03.[New] remove wide screen mode if the attached monitor is not wide screen monitor
04.[New] Support xorg-server-1.13.x
---------------------------------------------------------------------- 
v.0.96.00: by ycchen@090612
01.[Bug] Fixed 1920x1080 Screen not Full on SAMSUNG SyncMaster BX2231 
02.[New] Support 1600x900 60Hz (CVT Reduced Blank)
03.[Bug] Fixed display garbage issue when system restart, ycchen@090112
04.[Bug] Fixed cannot support wide screen mode on AST1300
---------------------------------------------------------------------- 
v.0.95.01: ycchen@052512
01.[Bug] Fixed iKVM cannot display properly with older VBIOS (before v.0.92.00)
02.[New] [AST2300] Modify DRAM settings by H/W request (2012_05_09) 
03.[New] Support 1360x768 60Hz
v.0.95.00: ycchen@032912
01.[Bug] Fixed driver cannot work properly if enable XEN, ycchen@011812
02.[New] Add Scratch to Disable 1920x1200 resolution
03.[Bug] Fixed some distribution didn't built-in XAA module
04.[New] Support xorg-server-1.12.x
----------------------------------------------------------------------
v.0.94.3: ycchen@111011
01.[New] Support xorg-server 1.11.x, ycchen@110911
v.0.94.2: ycchen@102811
01.[New] [AST2300] Modify DRAM Settings by H/W Request (07/06/11), ycchen@081111
02.[Bug] Fixed can't boot to X Window proprely if didn't attach EDID monitor
03.[New] Support 1280x800 60Hz, 1440x900 60Hz, 1680x1050 60Hz CVT reduced blank modes
----------------------------------------------------------------------
v.0.93.09: ycchen@071111
01.[Bug] Fixed the side effect of v.0.93.08 change item #2
v.0.93.08: ycchen@053111
01.[New] [AST2300] Modify MCLK to 396MHz by H/W request
02.[Bug] Patch no modes can display if attach VA2216W monitor
v.0.93.07: ycchen@050911
01.[Bug] Fixed it takes too long time to get EDID from EDID failed monitor
02.[New] Support Xorg 7.7 (xorg-server 1.10.x)
v.0.93.04: ycchen@030611
01.[New] [AST2300] Modify for DDR3 2Gb Support
02.[New] [AST2300] Slow Down CPU/AHB clock in VGA only mode
03.[Bug] Fixed 640x480 256c, 800x600 256c display failed issue if frame buffer size is above than 32MB
v.0.93.03: ycchen@021011
01.[New] [AST2300] Update DRAM Settings by H/W Request (020811)
02.[New] [AST2100/2150] Enable AST2100/2150 DRAM Calibration by H/W Request (021411)
v.0.93.01: ycchen@122810
01.First Release
