airFiber 5XHD FW Change log NOTE: v1.1.0 has known issue with auto FW update. Only manual FW update is possible on this version. -------------------------------------- Version 1.1.1 (June 27, 2018) -------------------------------------- New: - Regulatory: ETSI DFS support - Regulatory: Enable 5.8GHz (EN302502) for all Europe countries (BFWA members) allowing it - Regulatory: Enable UNII2 DFS band for US/FCC region - Wireless: Centralised wireless settings configuration for PTP link (from Master side). Connected device will follow wireless configuration change done on Master side - Wireless: Add antenna selection and custom antenna settings for LTU models - Wireless: Enable wireless security by default. No option for turn Security OFF - Login: Add link to UNMS mobile app on Login page - Dashboard: AirLink Map/Fresnel mode integration and design update - Dashboard: Add airView spectrum bar of Remote device - Dashboard: Add Duty Cycle and Frame Length reporting on Master side - Dashboard: Indicate LAN speed when it goes lower than GigE - Network: Flow Control option for DATA port. Default status: enabled - Network: Ethernet Carrier Drop feature - Network: Multicast Filter option for DATA port. Default status: disabled - Services: Ubiquiti Network Management System (UNMS) and UNMS mobile app support - System: Centralised Link FW update feature. Master can upgrade PTP link FW (from Master side) - System: DST support - Tools: airView: Custom frequency range scan - Tools: airView: In-Band scan option - Tools: Speed Test: Show your link device as preferred selection. Eliminate the need to enter login/pass of your connected device (from Master side) Improvements: - Stability improvements with 100MHz and 80MHz channel bandwidth - Stability improvements, including long time to establish many concurrent VoIP calls - Performance optimisations, improved modulation rate selection - Shorter device connection time - Latency improvements - Automated TX power selection for higher modulation rates - Improve GPS altitude calculation precision - WEB UI style/layout/messages improvements - Dashboard: UNMS status icon with activity levels on the top of Dashboard - Dashboard: Improve short distance display - Dashboard: Report "Not Connected" reasons on Dashboard, including DFS states (timer, lockout) - Dashboard: Add link to EULA and Privacy Policy - Dashboard: Add Collapsible header - Dashboard: Improve chain imbalance indication - Dashboard: Indicate Master role - Dashboard: Improve System Log view - Dashboard: Device details re-alignment, more statistics for GPS, Ethernet - Dashboard: Use the same metric units [Miles/Km] on all sections (Map / Link / Fresnel) - Dashboard: Add Hover text with explanation of UNMS status if Green/Flashing Yellow/Grey - Dashboard: System Log: Show latest messages first - Dashboard: More details: Report HW Bridge MAC table in more details view - Wireless: Make more precise duty cycle number: 66% -> 67% - Wireless: Move Output Power (EIRP) control under Advanced settings. Add Auto Output Power ON/OFF option. Switch Auto Output Power ON after FW update. - Wireless: Add protection for whitespaces in Link Name beginning/end - Services: SNMP: Add separate OID to show data port operational state - Services: Services clean up: Telnet/Device Discovery/CDP settings. Settings will be kept as configured. These Services still can be managed via Command line or UNMS - Services: Remove syslog configuration options. Delegate System log configuration via UNMS apps/server - System: Long device name does not fit in warning window - System: Move NTP configuration under System menu - System: Date/Time sync from GPS when NTP is disabled, remove Startup Date functionality as obsolete - Tools: Antenna Alignment: Updated antenna alignment tool. Remote RX signal reporting. Best achieved signal mark - Tools: Antenna Alignment: Reduce false positives of Alignment alarms - Tools: airView: Speed up airView scan, use background scanning history data - Tools: airView: Speed up Waterfall View scan results - Tools: airView: Don't expire HTTP session when airView tool is running - Tools: Cable test: Make DATA port as default option for Cable Test tool - Crash log: Add possibility to download Crash log report Fixes: - Device lockup issue when HW bridge table is full - Security: Privilege and Persistent Escalation writing Configuration File from RO user - Regulatory: Incorrect EIRP limit for UK (Band C) should be 36dBm - Regulatory: Update frequency range beginning for US - Regulatory: No DFS required for Indonesia 5.8GHz - Regulatory: Remove 5795-5815MHz gap for UK - Dashboard: Remove Bridge HW reference from UI, Network mode is Bridge - Dashboard: Remote negative GPS data is incorrectly represented on Dashboard Map view - Dashboard: Report Device Model in page header instead of Device Name - Dashboard: Remote IP is reported as Unknown when Management VLAN is enabled on remote side - Dashboard: More details: Page select controls are invisible in more details view - Wireless: Rekey cause packet drop - Wireless: Prevent connection from being stuck during link initialisation (GPS clock sync ON but no GPS signal) - Wireless: Slave does not obey set MAX TX modulation rate limit - Wireless: Cannot change Link Name, restart is required - Wireless: Auto TX Modulation stability and fixes for Uplink - Wireless: UI doesn't reload regulatory limits on country change - Network: Two default gateway set on device cause device become unreachable - Network: DHCP Client doesn’t configure default route when Management VLAN is configured - Network: Flow control issue with TS8 PRO mixed port 100 and 1000 Mbps - Network: Fix MAC table consistency to avoid ping loss (or lockup) while running STP protocol - Network: Ethernet negotiation issue with CISCO Switch 370 - Network: Add DNS settings in separate section - Network: Abort MTU configuration. Jumbo Frames should be enabled for packets larger than 1518 Bytes - Services: SNMP values freeze fix - System: Memory leak fix - System: Does allow to create Read-Only user without username - System: LTU devices do not answer to TCP discover request - System: Firefox suggests renew login info when press "Download Support Info" - Tools: Cable Test tool doesn't show failure when LAN speed dropped to 100 Mbps - Tools: Enter key issue with Speed test and Trace route tools - Tools: Constellation: Received Power reporting in Constellation tool doesn't match received signal - Tools: airView: Waveform View display issues on mobile version Known Issues: - Possible stability issues in 100MHz and 80 MHz channel (some corner cases). Will be resolved with next service release Notes: - Recommend updating far end of link before near end - Bridge MAC ID change. May affect device monitoring in AC2/UNMS/SNMP systems - v1.1.0 is not compatible to v1.1.1 ---------------------------------- Version 1.1.0 (February 05, 2018) ---------------------------------- New product support, LTU product family: - New: airFiber 5XHD support This FW supports PTP mode only. Notes: - Recommend updating far end of link before near end.