[DE500]
Type = NDIS
Title = "D-Link DE-500 Ethernet Adapter"
Version = 1.0
Drivername = DE500$
Xports = NETBEUI LANDD

[FILE]
Name = DE500.OS2
Path = @lanroot\ndis

; Parameter start

[netaddress]
tag = NETADDRESS
display = "Network adapter address"
type = Hexstring
Strlength = 12
optional = YES
editable = YES
help = "This parameter overrides the network address of the network
 adapter card.  The value of this parameter is a hexadecimal string of
 12 digits, as in 020001020304.  The address
 must be unique among all other network adapter addresses on the
 network."

[interrupt]
tag = INTERRUPT
display = "Interrupt level"
type = decimal
;range = 2 - 5
set = 3,4,5,6,7,9,11,12,14,15
default = 5
optional = YES
editable = YES
help = "This parameter specifies the interrupt level used for
 notifications
 between the workstation and the network adapter card.  Ensure that no
 conflicts exist between the various system components in their use
 of interrupts.  For an 80286, 80386, or 80486 workstation, the specified
 interrupt level will be redirected to interrupt level 9 because the
 cascaded PIC is already using interrupt level 2."

[ioaddress]
tag = IOAddress
display = "I/O base address"
type = Hexadecimal
set = 300, 320, 340, 360
default = 300
optional = YES
editable = YES
help = "This parameter specifies the starting address of the
 input/output port for the network adapter card.  The defined value
 must be based on the jumper configuration of the network adapter card.
 If the value of this parameter does not match the network adapter card
 jumper configuration, the network adapter driver reports an error."