D-Link Support Publishing       IBMLAN.TXT                       Feb. 1996

     D-Link DE-650CT PCMCIA Ethernet Card Installation for IBM Lan Support
                              and Lan Services

 Contents
 ÄÄÄÄÄÄÄÄ
        Introduction
        Requirements
        Minimum Skill Level
        Compatibility List
        Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        This installation assumes that the PCMCIA drivers are working properly.
        Please consult INST_DOS.TXT for help with PCMCIA Drivers.
        Getting Started will describe the installation for Lan Support/Servers.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        A PCMCIA compatible Laptop
        A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
         VLSI) or Databook compatible.
        IBM Lan Support 2.0/higher or Lan Services 4.x
        A DE-650CT (our single media cards are not supported, 650T and 650C)
        A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        A knowledge of basic DOS commands
        A knowledge of editing text files
        A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
        A knowledge of the network driver configuration being used
        Please see Support Options if you are not comfortable will this
         skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        DE-650CT only (will not run with DE-650T or DE-650C)
        Removal of any present PCMCIA drivers
        For a laptop compatibility list please consult your local
         D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        Installation for IBM Lan Support 2.x (see below for Lan Services 4.x)
        Please use Method 1 or 2 for this installation

        Method 1 -- Using the .NIF file:
        Insert the LAN Support diskette in Drive A.
        Run the install program.

                 A:\> DXMAID [Enter]

        The following message then appears:

                 "Do you have driver diskettes?"  [Yes]

        Use the Spacebar to switch between "no" and "yes".

        After copying LAN Support, specify the drive and path of the
         DOS NDIS files.

         For example: C:\LSP [Enter]

        The installation procedure terminates after copying the
         necessary file.

        Method 2 -- Modifying the contents of the CONFIG.SYS and
         PROTOCOL.INI files after installing other NICs:

        Copy the DE65S.DOS file to the directory where your IBM LAN
         Support program resides.

        Modify the NDIS device driver statement in the CONFIG.SYS
         as follows:

          DEVICE = [drive]:\path\DE65S.DOS

        Modify the PROTOCOL.INI file as follows:

           BINDINGS = DE65SIBM_NIF
                     :
                     :
          [DE65SIBM_NIF]
          DRIVERNAME = DE65S$

     IBM LAN Services v4.x installation instructions

        Execute the installation program from the IBM DOS LAN SERVICES diskette

                Type: >a:\install

        From the Network card field, select "Network card not shown in list
         below...".

        Specify the path for the corresponding oemsetup.inf file of the OEM
         driver intended for use.  Then, press Enter. The program then displays
         the driver name.

        Check that the driver configuration is correct.

        Complete the installation, restart your system to use the DOS LAN
         Services.