D-Link Support Publishing        NW4XX.TXT                       Feb. 1996

                 D-Link DE-650CT PCMCIA Ethernet Card Installation
                                for NetWare Server 4.x Driver

 Contents
 ÄÄÄÄÄÄÄÄ
        Introduction
        Requirements
        Minimum Skill Level
        Compatibility List
        Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        This installation assumes that the PCMCIA drivers are working properly.
        Please consult INST_DOS.TXT for help with PCMCIA Drivers.
        Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
        A PCMCIA compatible Laptop
        A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
         VLSI)
        Netware 4.xx Server Software
        A DE-650CT (our single media cards are not supported, 650T and 650C)
        A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        A knowledge of basic DOS commands
        A knowledge of editing text files
        A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
        A knowledge of the network driver configuration being used
        Please see Support Options if you are not comfortable will this
         skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        DE-650CT only (will not run with DE-650T or DE-650C)
        Removal of any present PCMCIA drivers
        For a laptop compatibility list please consult your local
         D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

        Using the install menu (for NetWare 4.1 only
        for other version see below)
        ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        Boot up the Novell Server.

        After booting up, execute "LOAD INSTALL".  Type:
         : load install

        Select "Driver Option" and then press Enter
        Select "Configure network drivers" and then press Enter
        Select "Select a driver" and then press Enter
        Press the Ins key to install an unlisted driver
        Press F3 to specify a different PATH (C:\SRV4X) and then press Enter
         <PATH> is the directory where nwde65s.lan resides
        Select "NWDE65S.LAN" and then copy the NWDE65S.lan file
        Set the adapter parameters, then select "Save parameters and load
         driver"
        From the Novell Server side, execute "load install".  Type:
         :load install
          Select <NCF files options>
          Select <Edit AUTOEXEC.NCF>
        Save the file to make modifications permenent

        Modifying an existing NetWare 4.x Server
        ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        From any workstation, log in to the Novell server as a SUPERVISOR.
        Copy all provided NLM and LAN files into your server's SYSTEM directory

          >copy <PATH>\*.*   F:\SYSTEM
          <PATH> here is the directory where support NLMs and NWDE650S.LAN
          reside.

        From the Novell Server side, execute "load install".  Type:
         :load install
           Select <NCF files options>
           Select <Edit AUTOEXEC.NCF>
        Modify the server's AUTOEXEC.NCF file as follows.
         :load NWDE65S.LAN
           (msm.nlm and ethertsm.nlm will also be loaded when loading
            nwde65s.lan)
         :bind ipx to NWDE65S NET=xxxx
        Shut down the server and then turn it ON again.
        The driver is now installed and running.