D-Link Support Publishing INST_OS2.TXT Feb. 1996 D-Link DE-650CT PCMCIA Ethernet Card Installation for OS/2 Contents 컴컴컴컴 Introduction Requirements Minimum Skill Level Compatibility List Getting Started Revision History Support Options Copyrights, Trademarks, and Disclaimers Introduction 컴컴컴컴컴컴 For convenience, the INSTALL.EXE provided on the driver disk. The A:\INSTALL.EXE will install all of the relative drivers. INSTALL.EXE requires a DOS based environment to do the installation process. The ODI DOS driver, NDIS DOS driver, and NDIS OS/2 driver are the only network operating system drivers that support an On-Line Hot-Swap function. Hot-swap allows the card to be removed and re-inserted with out reloading the driver. Eventhough the driver supports Hot-Swap your NOS may not support hot-swap. DCD16.OS2: DCD16.OS2 and DCDOPEN.OS2 are client drivers for IBM OS/2 Warp. PCIC16.OS2: PCIC16.OS2 is an enabler for IBM OS/2 v2.x that hasn't to install SS and CS. PCIC16.OS2 only support Intel 82365SL compatible PCMCIA controller. Requirements 컴컴컴컴컴컴 A PCMCIA compatible Laptop A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and VLSI). A DE-650CT (our single media cards are not supported, 650T and 650C) A knowledge of basic OS/2 commands and editing text files Minimum Skill Level 컴컴컴컴컴컴컴컴컴� A knowledge of basic OS/2 commands A knowledge of editing text files A knowledge of OS/2 basic file structure (CONFIG.SYS and AUTOEXEC.BAT) A knowledge of the network driver configuration being used Please see Support Options if you are not comfortable will this skill level Compatibility List 컴컴컴컴컴컴컴컴컴 DE-650CT only (will not run with DE-650T or DE-650C) Removal of any present PCMCIA drivers For a laptop compatibility list please consult your local D-Link Branch Office Getting Started 컴컴컴컴컴컴컴� PCIC16.OS2 for OS/2 2.x (See below for IBM Thinkpad and Warp Install) 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 This PCIC16.OS2 program is used to open an I/O window mapping and IRQ of PCIC(82365SL) or compatible PCMCIA chipset. The network drivers will need to match those specified by PCIC16.OS2. Install PCIC16.OS2: In OS/2 config.sys add: : DEVICE=C:\path\PCIC16.EXE [/iop:P0] [/irq:P1] [/slt:P2] DEVICE=C:\NETWARE\DE65SODI.SYS 컴컴> D-Link Network Driver : Optional Parameter Description: /iop :I/O base /irq :IRQ value /slt :Slot number P0 :The selectable window I/O base with 0x20 range. The default value is 0x300. P1 :The selectable irq value. The default value is 0x11. P2 :The selectable slot number. The default number is 0. IBM Thinkpads using OS/2 v2.x 컴컴컴컴컴컴컴컴컴컴컴컴컴컴� Install IBM PCMCIA software into your system. Add DCD16.OS2 and DCDOPEN.OS2 to CONFIG.SYS Sample CONFIG.SYS file: (Thinkpad 750/750C) : DEVICE=C:\OS2\APM.SYS : DEVICE=C:\OS2\PCMCIA.SYS DEVICE=C:\OS2\MDOS\VPCMCIA.SYS : DEVICE=C:\path\DCD16.OS2 컴쩡� D-Link Client Drivers DEVICE=C:\path\DCDOPEN.OS2 컴� : DEVICE=C:\THINKPAD\$ICPMOS2.SYS DEVICE=C:\THINKPAD\IBM2SS01.SYS /S0=2 DEVICE=C:\THINKPAD\ICRMU01.SYS : Shutdown your computer and restart it. Install network driver. Warning: Please note that the parameters of DCD16.OS2 must match the NDIS for OS/2 or ODI for OS/2 drivers, Insert DE-650CT card before boot OS/2 system because OS/2 will load the client drivers and network driver when it brings up the system. A missing card may cause the OS/2 system to fail. The default driver parameters are I/O=300 and IRQ=11. If NDIS driver is used (only NDIS driver), it is possible to remark the client driver (add REM before DCD16.OS2 and DCDOPEN.OS2 statement) in CONFIG.SYS, then install network driver directly. OS/2 v3.0 Warp Installation 컴컴컴컴컴컴컴컴컴컴컴컴컴� Install OS/2 v3.0 Warp Edit CONFIG.SYS as follow. IFS=C:\OS2\HPFS.IFS /CACHE:512 /CRECL:4 /AUTOCHECK:C PROTSHELL=C:\OS2\PMSHELL.EXE SET USER_INI=C:\OS2\OS2.INI SET SYSTEM_INI=C:\OS2\OS2SYS.INI SET OS2_SHELL=C:\OS2\CMD.EXE SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,CONNECTIONS,LAUNCHPAD SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE SET COMSPEC=C:\OS2\CMD.EXE LIBPATH=.;C:\OS2\DLL;C:\OS2\MDOS;C:\;C:\OS2\APPS\DLL;C:\MMOS2\DLL; C:\NETWARE; SET PATH=C:\OS2;C:\OS2\SYSTEM;C:\OS2\INSTALL;C:\;C:\OS2\MDOS;C:\OS2\APPS; C:\MMOS2;C:\NETWARE;L:\OS2;P:\OS2;L:\NLS;P:\NLS; SET DPATH=C:\OS2;C:\OS2\SYSTEM;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP; C:\OS2\MDOS;C:\OS2\APPS;C:\MMOS2;C:\MMOS2\INSTALL;C:\NETWARE;L:\OS2; P:\OS2;L:\NLS;P:\NLS; SET PROMPT=$i[$p] SET HELP=C:\OS2\HELP;C:\OS2\HELP\TUTORIAL;C:\MMOS2\HELP; SET GLOSSARY=C:\OS2\HELP\GLOSS; SET IPF_KEYS=SBCS PRIORITY_DISK_IO=YES FILES=20 BASEDEV=IBMKBD.SYS DEVICE=C:\OS2\BOOT\TESTCFG.SYS DEVICE=C:\OS2\BOOT\DOS.SYS DEVICE=C:\OS2\BOOT\PMDD.SYS BUFFERS=90 IOPL=YES DISKCACHE=D,LW MAXWAIT=3 MEMMAN=SWAP,PROTECT SWAPPATH=C:\OS2\SYSTEM 2048 4096 BREAK=OFF THREADS=256 PRINTMONBUFSIZE=134,134,134 COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS SET KEYS=ON SET BOOKSHELF=C:\OS2\BOOK;C:\MMOS2; SET SOMIR=C:\OS2\ETC\SOM.IR;C:\OS2\ETC\WPSH.IR;C:\OS2\ETC\WPDSERV.IR SET SOMDDIR=C:\OS2\ETC\DSOM REM SET DELDIR=C:\DELETE,512; BASEDEV=PRINT01.SYS BASEDEV=IBM1FLPY.ADD BASEDEV=IBM2FLPY.ADD BASEDEV=IBM1S506.ADD BASEDEV=XDFLOPPY.FLT BASEDEV=OS2DASD.DMD SET EPMPATH=C:\OS2\APPS; PROTECTONLY=NO SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS FCBS=16,8 RMSIZE=640 DEVICE=C:\OS2\MDOS\VEMM.SYS DOS=LOW,NOUMB DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB DEVICE=C:\OS2\MDOS\VDPMI.SYS DEVICE=C:\OS2\MDOS\VDPX.SYS DEVICE=C:\OS2\BOOT\APM.SYS DEVICE=C:\OS2\MDOS\VAPM.SYS DEVICE=C:\OS2\MDOS\VMOUSE.SYS DEVICE=C:\OS2\BOOT\POINTDD.SYS DEVICE=C:\OS2\BOOT\MOUSE.SYS CODEPAGE=437,850 DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP BASEDEV=PCMCIA.SYS 컴컴컴컴컴컫컴컴 Card Services DEVICE=C:\OS2\MDOS\VPCMCIA.SYS 컴컴컴컴컴켸 DEVICE=C:\OS2\BOOT\COM.SYS DEVICE=C:\OS2\MDOS\VCOM.SYS DEVICE=C:\OS2\BOOT\AUTODRV2.SYS C:\OS2\AUTODRV2.INI ****************************************************** ADD DEVICE=C:\path\DCD16.OS2 /IOP:320 /IRQ:11 컴쩡� D-Link Client Drivers DEVICE=C:\path\DCDOPEN.OS2 컴컴컴컴컴컴컴컴� here ****************************************************** BASEDEV=IBM2SS01.SYS /s0=2 컴컴컴컴컴컴컴컴 Socket Services DEVINFO=SCR,VGA,C:\OS2\BOOT\VIOTBL.DCP SET VIDEO_DEVICES=VIO_SVGA SET VIO_SVGA=DEVICE(BVHVGA,BVHSVGA) DEVICE=C:\OS2\MDOS\VSVGA.SYS DEVICE=C:\MMOS2\CS4231.SYS N:BSAUD1$ DEVICE=C:\MMOS2\VCS4231.SYS BSAUD1$ SET MMBASE=C:\MMOS2; SET DSPPATH=C:\MMOS2\DSP; SET NCDEBUG=4000 DEVICE=C:\MMOS2\SSMDD.SYS DEVICE=C:\MMOS2\R0STUB.SYS REM --- NetWare Requester statements BEGIN --- SET NWLANGUAGE=ENGLISH DEVICE=C:\NETWARE\LSL.SYS RUN=C:\NETWARE\DDAEMON.EXE REM -- ODI-Driver Files BEGIN -- DEVICE=C:\NETWARE\DE65SODI.SYS rem DEVICE=C:\NETWARE\NE2000.SYS REM DEVICE=C:\NETWARE\ROUTE.SYS REM -- ODI-Driver Files END -- DEVICE=C:\NETWARE\IPX.SYS DEVICE=C:\NETWARE\SPX.SYS RUN=C:\NETWARE\SPDAEMON.EXE DEVICE=C:\NETWARE\NMPIPE.SYS rem DEVICE=C:\NETWARE\NPSERVER.SYS RUN=C:\NETWARE\NPDAEMON.EXE DEVICE=C:\NETWARE\NWREQ.SYS IFS=C:\NETWARE\NWIFS.IFS RUN=C:\NETWARE\NWDAEMON.EXE DEVICE=C:\NETWARE\NETBIOS.SYS RUN=C:\NETWARE\NBDAEMON.EXE DEVICE=C:\NETWARE\VIPX.SYS DEVICE=C:\NETWARE\VSHELL.SYS PRIVATE REM --- NetWare Requester statements END --- Shutdown your computer and restart it. Install network driver. Please be careful that: Please note that the parameters of DCD16.OS2 must match the NDIS for OS/2 or ODI for OS/2 drivers, Insert DE-650CT card before boot OS/2 system because OS/2 will load the client drivers and network driver when it brings up the system. A missing card may cause the OS/2 system to fail. The default driver parameters are I/O=300 and IRQ=11. If NDIS driver is used (only NDIS driver), it is possible to remark the client driver (add REM before DCD16.OS2 and DCDOPEN.OS2 statement) in CONFIG.SYS, then install network driver directly. Revision History 컴컴컴컴컴컴컴컴 Revision: No. 950601 1. Update the following drivers: \IBMPC\NT31 \IBMPC\LANSMART \IBMPC\NETWARE\CLIENT\IPXDE65N.COM \IBMPC\NDIS\DOS\NDIS.DOS \IBMPC\WFW311 \IBMPC\NDIS\OS2\PCIC16.OS2 Revision: No. 960201 1. Update all DOS drivers. All DOS version drivers can auto-detect the I/O and IRQ. Drivers named DE65S. 2. New added Diagnostics program 3. Updated AutoInstall program from v1.0 to v2.0 Support Options 컴컴컴컴컴컴컴� For technical support, you may contact your authorized D-Link distributor, dealer, or the following D-Link headquarters: In U.S.A. Tel: +1(714)455-1688 Fax: +1(714)455-2521 BBS: +1(714)455-1779 BBS: +1(714)455-9616 In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669 BBS: +1(905)828-6673 In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500 BBS: +44(181)235-5511 In Germany Tel: +49(6196)643011 Fax: +49(6196)28049 BBS: +49(6196)28378 In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299 BBS: +886(2)910-1835 In France Tel: +33(1)30238688 Fax: +33(1)3028689 In Australia Tel: +61(2)4177100 Fax: +61(2)4171077 BBS: +61(2)4173711 In Nordic Tel: +46(40)163330 Fax: +46(40)163340 BBS: +46(40)163343 In Singapore Tel: +657746233 Fax: +657746322 BBS: +657744787 In China Tel: +86(10)4934175 Fax: +86(10)4991648 In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352 In India Tel: +91(22)6172478 Fax: +91(22)6172476 The BBS communication setup information is as follows : Speed : 2400-14400 baud - Germany 2400-9600 baud - Asia,Taiwan 14400-16800 baud - Canada 9600-14400 baud V32, V32bis, V42, V42bis - U.S.A. 2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe Parity : none Data bits : 8 Stop bit : 1 Copyrights, Trademarks, and Disclaimers 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� A documents and DE-650 drivers are Copywritten to Copyright (c) 1996 by D-Link Corporation. All rights reserved. All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporations