D-Link Support Publishing \LANTASTI.DRV\README.TXT July 1996 D-Link PCI Family Ethernet Adapter Installation for Lantastic Contents 컴컴컴컴  Introduction  Requirements  Minimum Skill Level  Compatibility List  Getting Started Introduction 컴컴컴컴컴컴 This installation assumes that the adapter is working properly. Getting Started will describe the installation instructions. Requirements 컴컴컴컴컴컴  A PCI compatible computer  A PCI Family Series Adapter  Lantastic AI 5.x or 6.x  A knowledge of basic DOS commands and editing text files Minimum Skill Level 컴컴컴컴컴컴컴컴컴�  A knowledge of basic DOS commands  A knowledge of editing text files  A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)  A knowledge of the network driver configuration being used  Please see Support Options if you are not comfortable with this skill level Compatibility List 컴컴컴컴컴컴컴컴컴  Any PCI Family Ethernet Adapter  For a Motherboard compatibility list please consult your local D-Link Branch Office Getting Started 컴컴컴컴컴컴컴� Lantastic 5.0 Install 컴컴컴컴컴컴컴컴컴컴� Using NDIS driver 컴컴컴컴컴컴컴컴�  For NDIS driver, D-Link support "DLKPCI.DOS" driver for PCI Family Adapter. User can use "DLKPCI.DOS" driver to replace AEXNDIS.DOS which is the NDIS driver offered by ARTISOFT. *** CONFIG.SYS **** DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI ------------------------------------------------------------- DEVICE=C:\LANTASTI\AEXNDIS.DOS -------> By Lantastic * please replace to * DEVICE=C:\LANTASTI\DLKPCI.DOS -------> By D-Link ------------------------------------------------------------- *** STARTNET.BAT *** ------------------------------------------------------------- C:\LANTASTI\AI-NDIS BIND_TO=AEXNDIS_NIF * please replace to * C:\LANTASTI\AI-NDIS BIND_TO=DLKPCI_NIF ------------------------------------------------------------- C:\LANTASTI\AILANBIO C:\LANTASTI\REDIR MachineName *** PROTOCOL.INI *** ------------------------------------------------------------- [AEXNDIS_NIF] DRIVERNAME = AEXNDIS$ * please replace to * [DLKPCI_NIF] DRIVERNAME = DLKPCI$ -------------------------------------------------------------- Comments: If you are using PROTMAN.DOS V1.x, you must use the NO_BIND option on the AI-NDIS command line in the STARTNET.BAT, and you must run NETBIND.EXE V1.x before AILANBIO.EXE. Lantastic 6.0 Install 컴컴컴컴컴컴컴컴컴컴� Using NDIS driver 컴컴컴컴컴컴컴컴�  To install D-Link NDIS driver "DLKPCI.DOS", user can use Lantastic 6.0 install program, and select "NDIS support for network adapters" then type path "C:\LANTASTI.DRV" (specify by D-Link install program). Install program will search "DLKPCI.DOS" and "PROTOCOL.INI" and copy these two files to target directory.  If user already installed Lantastic 6.0 and want to install D-Link's PCI Family adapter, just replace AEXNDIS.DOS with D-Link's NDIS driver "DLKPCI.DOS" at CONFIG.SYS NOTE: "DLKPCI.DOS" is an NDIS driver supported by D-Link "AEXNDIS.DOS" is an NDIS driver supported by ARTISOFT *** CONFIG.SYS *** DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI ------------------------------------------------------------- DEVICE=C:\LANTASTI\AEXNDIS.DOS -------> By Lantastic * please replace to * DEVICE=C:\LANTASTI\DLKPCI.DOS -------> By D-Link ------------------------------------------------------------ *** STARTNET.BAT *** @echo ===== Begin Lantastic configuration ===== SET LAN_CFG=C:\LANTASTI PATH C:\LANTASTI;%PATH% SET LAN_DIR=C:\LANTASTI.NET rem Please obtain the NETBEUI.EXE program from Microsoft NETBEUI ------------------------------------------------------------ AI-NDIS BIND_TO=AEXNDIS_NIF * please replace to * AI-NDIS BIND_TO=DLKPCI_NIF ------------------------------------------------------------ AILANBIO @STARTNET.CFG REDIR LANTA @STARTNET.CFG SERVER C:\LANTASTI.NET @STARTNET.CFG NET LOGIN \\LANTA @echo ===== End LANtastic configuration ===== *** Protocol.ini *** [NETBEUI_XIF] DriverName = netbeui$ Sessions = 6 NCBS = 12 ------------------------------------------------------------ Bindings = AEXNDIS_NIF * please replace to * Bindings = DLKPCI_NIF ------------------------------------------------------------ LANABASE = 1 ------------------------------------------------------------ [AEXNDIS_NIF] DRIVERNAME = AEXNDIS$ * please replace to * [DLKPCI_NIF] DRIVERNAME = DLKPCI$ ------------------------------------------------------------ Using ODI DOS driver 컴컴컴컴컴컴컴컴컴컴  ODI for DOS driver, D-Link support "DLKPCI.COM" driver for PCI Family Adapter. User can use "DLKPCI.COM" driver to replace NRODI.COM which is the ODI for DOS driver offered by ARTISOFT. Note: Because DLKPCI.COM following HSM v4.0 spec, please save LSL.COM, IPXODI.COM that original supported by Lantastic. Copy both LSL.COM, IPXODI.COM from C:\LANTASTI.DRV to target directory C:\LANTASTI. *** STARTNET.BAT *** @echo ===== Begin Lantastic configuration ===== SET LAN_CFG=C:\LANTASTI PATH C:\LANTASTI;%PATH% SET LAN_DIR=C:\LANTASTI.NET SET NWDBPATH=C:\Lantasti\NW LSL --> Please use new release driver NRODI --> please replace to DLKPCI ODINSUP IPXODI --> Please use new release driver ------------------------------------------------------------ AI-NDIS BIND_TO=NRODI * please replace to * AI-NDIS BIND_TO=DLKPCI ------------------------------------------------------------ AILANBIO @STARTNET.CFG REDIR LANTA @STARTNET.CFG SERVER C:\LANTASTI.NET @STARTNET.CFG NET LOGIN \\LANTA @echo ===== End LANtastic configuration ===== *** NET.CFG *** Please add below string into NET.CFG file. Link Driver DLKPCI Frame Ethernet_802.3