[DLKPCI]
Type = NDIS
Title = "D-Link PCI Ethernet Adapter"
Version = 2.01
Drivername = DLKPCI$
Xports = NETBEUI LANDD

[FILE]
Name = DLKPCI.DOS

; Parameter start

[NETWORKADDRESS]
tag = NETWORKADDRESS
display = "Network adapter address"
type = Hexstring
Strlength = 12
optional = YES
editable = YES
help = "This parameter overrides the network address of the network
 adapter card.  The value of this parameter is a hexadecimal string of
 12 digits, as in 020001020304.  The address
 must be unique among all other network adapter addresses on the
 network."

[SLOT]
tag = SLOT
display = "Slot Number"
type = decimal
range = 1 - 16
optional = YES
editable = YES
help = "This parameter specifies the slot number used for notifications."


[SIA_MODE]
tag = SIA_MODE
display = "Connector Type"
type = string
Strlength = 14
Set = TP, BNC, TP_FULL_DUPLEX , AUTOSENSE
default = AUTOSENSE
optional = YES
editable = YES
help = "This parameter specifies the connector type configuration of
the  network adapter card.  The specification of this parameter depends
 on the specific hardware configuration.  This parameter is used only
 for the DE-530CT adapter for Personal Computer AT workstations.
 Use 'BNC' if you have a Coax or thin Ethernet connector, use
 'TP' if you have a UTP/STP connector and use 'TP_FULL_DUPLEX' if you
 have TP full duplex connector ."

[DATA_RATE]
tag = DATA_RATE
display = "Transmition Data Rate "
type = string
Strlength = 5
Set = MB10, MB100
optional = YES
editable = YES
help = "This parameter specifies the configuration of data rate of
        the network adapter . This parameter is used only for
        DFE-500TX . Use 'MB100' if you want to transmit by 100M bps
        and 'MB10' for 10M bps . "

[SOFTWARE_CRC]
tag = SOFTWARE_CRC
display = "Software CRC"
type = string
Strlength = 8
Set = ENABLED, DISABLED
optional = YES
editable = YES
help = "This parameter specifies the software CRC"