D-Link Support Publishing       \NDIS\IBMLAN.TXT                July 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for IBM LAN Support and LAN Services


 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     IBM LAN SUPPORT and LAN Services
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable with this
      skill level


 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    Installation for IBM Lan Support 1.3x (see below for Lan Services 4.x)
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    Please use Method 1 or 2 for this installation

    Method 1
    ÄÄÄÄÄÄÄÄ
      Using the .NIF file:

         Insert the LAN Support diskette into Drive A.

         Run the install program.

          A:\> DXMAID [Enter]

         The following message then appears:

          "Do you have driver diskettes?"  [Yes]

          (You can press [Space] to switch between No and Yes.)

         After copying LAN Support, specify the drive and path of the DOS NDIS
          files reside.

          For example: C:\LSP [Enter]

         The installation procedure terminates after the necessary files are
          copied.

    Method 2
    ÄÄÄÄÄÄÄÄ
      Modifying the contents of the CONFIG.SYS and PROTOCOL.INI files after 
      installing other NICs

         Copy the DLKPCI.DOS file to the directory where your IBM LAN
          Support program resides.

         Modify the NDIS device driver statement in the CONFIG.SYS as below:

          DEVICE = [drive]:\path\DLKPCI.DOS

         Modify the PROTOCOL.INI file as below:

          BINDINGS = DLKPCII_NIF
               :
               :
          [DLKPCII_NIF]
          DRIVERNAME = DLKPCI$


    IBM LAN Services v4.x installation instructions
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

     Execute the installation program from the IBM DOS LAN SERVICES diskette.

        Type: >a:\install

     From the Network card field, select 
      "Network card not shown in list below...".

     Specify the path for the corresponding oemsetup.inf file of the OEM
      driver intended for use.  Then, press Enter. The program then displays
      the driver name.

     Check that the driver configuration is correct or nit.

     Complete the installation, restart your system to use the DOS LAN
      Services.